If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
ZoneAlarm missing Firewall Zones tab for subnet. New NAT router won't show Entire Network.
Intro, Yesterday's project: pc1, pc2, existing cable modem to Netgear
rp614na Ethernet router. Per Netgear quick install, Internet worked for both PCs - - Good. Already done: only TCP/IP bindings [1] But current trouble is lack of File & Printer Sharing, as seen when trying to open Entire Network and/or Workgroup and/or individual pc (the other pc). Before installing router, both PCs had had File & Printer Sharing turned off. Probably irrelevant: In Win Network of both PCs, I've tried various settings for File & Printer Sharing: "Disabled", "Enabled", "Automatic", but general result is: some lack of visibility [2] occurs for the PC "Master Browser" set "Disabled". PROGRESS: Web clues told me ZoneAlarm might be the hang up. This was confirmed because both PCs see files properly if I shutdown both ZA. Based on further web clues, I think I should be able to run ZA. Because... 1 Shutdown Za on pc2. ZA on only pc1 with pc2's subnet in pc1 Firewall Zones. Now, pc1 can see pc2 files. 2-way network usability between the PCs. 2 (If pc2 ZA is running, it's ZA shows pc1 subnet IP "blocked" message, when pc1 tries to open Entire Network.) Trying to imitate subnet entry success on pc1, I'd like to add pc1 subnet to pc2 ZA... But pc2's ZA is MISSING FIREWALL ZONES tab!!! So I can't add pc1 subnet to pc2's ZA. . I installed slightly newer ver. ZA[3], but same problem, Firewall Zones tab is not there.[4] I'm wondering if some Windows "Internet Options" or "Network" settings are influencing the Zlsetup to avoid creating the "zones" tab for the firewall dialog of ZoneAlarm. Can anyone suggest .. something? I see this as a ZoneAlarm problem. No clues found in searches on forums.zonelabs.com. I might post there next. Footnotes: ---------- Pc1 and pc2 have different histories, one was Win ME OEM, other was upgrade from 98 SE. Both are now WinME. Both have slightly different IE/Internet Options security settings (leapfrog-like evolution). They have very different hardware (D-link Nic card vs 3com chips on Motherboard . Celeron vs AMD. Etc. ) Their Win Network lists contain different Adapters. (pc1 NDSIWAN, ms Vpn, support, #2, 3com integrated etc. pc2 ms Tv/Video Connection (why? What's this?), d-link, Cnet Pro2000 (Cnet adapter appeared with d-link NIC install)) Both: Primary logon is Windows Logon, though MS Client Networks is still listed. Both now have an automatic logon, user name "default". (password are blank, but for extra security, maybe I could store a password while still have automatic logon at startup?) No IIRC, or interactive games (no need for IPX/SPX). No server or remote access uses anticipated. Standard Netgear router's settings, except I replaced password. [1] Per grc "bondage" pages, I've fiddled with NetBEUI protocol, and bindings. Eventually I noticed that only TCP/IP bindings allow Internet access (because this router uses only TCP/IP?), so I've since Removed NetBEUI. Result: ShieldsUp shows router (maybe with assist from ZA) is stealthing all 1056 ports - good. [2] Lack of visibility are balking at: 1) Entire Network", 2) not seeing workgroup, or 3) not opening the (other) pc to see list of shared folder/printers. After discovering Za blocking, in both PCs' Win Network I've set File & Printer Sharing: "Master Browser" Enabled. [3] ZoneAlarm Free. Zlsetup attempted on pc2 are today's download 5..0.590.043 and a previous recent version 5..0.590.015. That previous 5..0.590.015 is allowing me to use the zones tab on pc1 [4] Firewall Zones tab may have always been missing, when pc2 wasn't networked. But I hadn't any reason to look for the tab. Hmmm.. comparing ZA dialog in both PCs... I see pc2 also lacks the "Preferences" and "Product Info" tabs in "Overview" dialog. And I think "Preferences" (and likely Product Info) were missing before I downloaded the slightly newer Zlsetup. I always choose "clean install" during zlsetup. ---- duplicate posted to msn news server and 'regular' newsgroups(perhaps someone wants to read possible solution.) |
Thread Tools | |
Display Modes | |
|
|