If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#21
|
|||
|
|||
Problems Installing Windows 98
=?Utf-8?B?RnJhbms=?= voiced his/her/it's humble opinion in
microsoft.public.win98.performance on Tue 22 Aug 2006 09:43:01a: I've heard of compatibility mode, I'll take a look and see if it helps. Thanks for your suggestion! Compatibility mode is to run a misbehaving legacy file whilst running XP. Win95, 98, 98SE have similar ways to do the same for legacy DOS proggies. Frank "USR" wrote: Since this is a new system, it most likely not function with Windows 98. Not just a driver issue but also hardware limitations. Have you tried running this program in XP using compatibility mode? "Frank" wrote in message ... Ok, let me explain myself before telling me that I'm just plain stupid. So, here's the situation. I have a customer that's looking to operate on old version of digitizing software. The software was designed to run on Windows 98. Here's the issue: when attempting to install Windows 98 on our customer's brand new hp computer, no real problems are noticed. As prompted initially, Windows formatted the C: drive. After doing a complete install and re-booting the PC a second time as prompted, the PC locks when attempting to boot up. Same thing happened with me. We bought a Compaq from future shop a couple of Christmas' ago that came with XP. "Screw that" I said. I'm using 98SE. Anyway I wiped the drive nad tried to get SE and it was a no-go. Compaq, HP, Dell etc. use proprietary motherboards, chips, hard disks etc that will ONLY work with the OS provided. I phoned Compaq, ranted and raved a little and had them send me a complete set of recovery disks as I'd already hosed the recovery partition as well as the C:\ drive. Learned a valuable lesson that day. Build your own as I've been doing for twenty years. Then you know what's really going on with your system. I've been using the same install of 98SE for almost seven years now. It's survived eight motherboard transplants. The latest was running a dual-boot system with XP Home. I replaced my aging Duron 1000 MB with a new 64 bit Sempron equipped MB, 800 MHz FSB, HyperThreading technology, yadda-yadda. Xp got hosed and I type to you through the amazing stick-too-itnous of the not so late tho still great... Windows 98SE. TADA! I can still access my XP partition, tho the proggies won't run it doesn't much matter as everything I need really works in SE. Another dual-boot is in the works. 98SE with 64-bit Unbuntu Linux. Eventually planning to migrate to Linux with SE as back-up. It's a survivor fer sure. You likely will never get 98 to work on an HP comp. If you want to try a dual-boot system get a new, never installed HD, install Win98SE first, then XP. 98 HAS to be on the C:\ drive. Xp being the shiftless bum that it is will live anywhere. So, realizing that this operating system runs off of DOS and the file systems needs to be FAT, not NTFS formatted, I partitioned the hard drive to operate in DOS via FDISK. After this hard format of the hard drive, I re-started the PC with the Windows install CD in the drive, and Windows began a secondary format of the drive. This looked to be the format that I was looking for as it was taking forever (not the usually quick format that I was continually running into). After taking a lunch break, I returned to finish off the install process of Windows 98 once again. Thinking that I had finally done it, the PC rebooted, and then once again, just as the Windows 98 logo appeared, the PC fully locked. Start with FDisk and create the partitions you need. Format the partitions and make the first partition active. This is where you will install SE. Best to have another comp with access to the internet to get the drivers, etc you'll find you need. Copy all the 98 files off the CD into a folder on the C:\ drive. Like c:\Winstall. Run Setup.exe from there so you won't be nagged for the 98 CD every time 98 wants a file off the disk. If you're installing XP as well, just boot it off the Cd and it will detect SE and install itself in whatever partition you have prepared. DO NOT select NTFS! Stick to FAT32. Once NTFS is installed you can NEVER get XP off of it. If you are so short of HD space you shouldn't be doing this in the first place Oh, and don't let me forget, I couldn't get Windows to find the PC's CD ROM drive (although I could access it via DOS). When in Safe Mode, I was able to ensure that the Hard Drives File Systems was in fact set as FAT and could operate normally. Make sure you have a line similar to this in your autoexec.bat and autoexec.dos C:\MSCDEX.EXE /D:mscd001 /L:%CDROM% and a line like this in your config.sys and config.dos device=c:\oakcdrom.sys /D:mscd001 Both are text files and should be opened, edited and saved in Notepad or other pure text editor. If they won't save because they're read only, copy your text, close the .bat or .sys file. Right-click on the original properties uncheck the read-only attribute, hidden too if checked, apply or OK, re-open the file, then paste your text that you saved, edit and save it. Reboot. Worked for me. You need to set up the paths properly to make it work. I just find the newest files with the Search and copy them to C:\ . Look for mscdex.exe and *cdrom.sys. Copy the newest mscdex.exe and any *cdrom.sys to the root. PS: Rename the .sys file in the device= line to the cdrom.sys file available to you. I hope all this makes some sense to any professional's out there that can offer some advice. I'm no where near an expert, so any advice from anyone would be GREATLY appreciated! Thanks, Frank -- Later...... Labrat...... |:^{) |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
I can't connect to my shared printer on my Windows 98 SE machine | Martin Healy | Printing | 2 | July 7th 05 07:55 PM |
Can't connect to my network printer | Martin Healy | Networking | 8 | July 6th 05 10:35 PM |
Win'98SE & IE 6 | Gary S. Terhune | General | 269 | February 23rd 05 05:20 AM |
FAQ: Win98 users: Upgrading to WinXP, IE6, etc. | JM | Improving Performance | 6 | July 26th 04 01:44 PM |
Zero-byte D: drive should not show, C: missing from Device Manager | *Vanguard* | General | 8 | June 12th 04 04:19 AM |