Stimon caused an invalid page fault

Help! Here's the complete description: STIMON caused an
invalid page fault in mudule HPGTPUSD.DLL at 019f:10008b07.
Registers:
EAX=00000000 CS=019fEIP=10008b07 EFLGS=00010206
EBX=01e04250 SS=01a7 ESP=018dfc14 EBP=018dfd90
ECX=01e04270 DS=01a7 ESI=01e04270 FS=39cf
EDX=bffc9490 ES=01a7 EDI=018dfc14 GS=0000
Bytes at CS:EIP:
8b 38 8d 45 f0 50 68 90 e5 02 10 e8 eb e6 ff ff
Stack dump:
5c2e5c5c 73627355 306e6163 00000000 01e04250 1000899b
100089ac 80546c60 00000008 8053e7ac 10026530 00000000
1002e8e0 0000dac4 00000000 00000000

I find no specific fix for your problem. I would start by replacing
stimon.exe with a fresh copy from your Win98 CD per the instructions below.
Then uninstall the HP software and try installing it again. If still no
luck, go on a spyware hunt:

Spyware/scumware/adware are causing numerous system problems. I recommend
you download and use the following programs and consider removing everything
these programs identify. Be aware that there are frequent updates to these
programs and you need to check for them before every use.

AdAwa http://www.lavasoftusa.com/software/adaware/

CWShredder: http://www.spywareinfo.com/~merijn/cwschronicles.html (download
link near the bottom)

Spybot: http://www.safer-networking.org/
***********

Run sfc.exe and select the "extract one file..." option. Type in the
complete name of the missing file you want to restore or use the browse
button for a file replacement. Click start and in the resulting window,
browse to the location of the folder containing the W98 .cab files (either
the hard drive or CDRom drive). If the information in the "save in" box is
wrong, use the browse button to show where the file is to be restored to.
Click OK and if appropriate, on the resulting screen, show the location
where the file being replaced is to be backed up to. Click OK or skip as
appropriate. Restart your computer and the file replacement will occur
during the boot process.

If you are going to use sfc.exe for other than the extract option, I highly
recommend that you first read the article he
http://home.satx.rr.com/badour/html/using_sfc.html


--
Regards

Ron Badour, MS MVP for W98
Tips: http://home.satx.rr.com/badour
Knowledge Base Info:
http://support.microsoft.com/default.aspx?pr=kbinfo

"Jim" wrote in message
...
Help! Here's the complete description: STIMON caused an
invalid page fault in mudule HPGTPUSD.DLL at 019f:10008b07.
Registers:
EAX=00000000 CS=019fEIP=10008b07 EFLGS=00010206
EBX=01e04250 SS=01a7 ESP=018dfc14 EBP=018dfd90
ECX=01e04270 DS=01a7 ESI=01e04270 FS=39cf
EDX=bffc9490 ES=01a7 EDI=018dfc14 GS=0000
Bytes at CS:EIP:
8b 38 8d 45 f0 50 68 90 e5 02 10 e8 eb e6 ff ff
Stack dump:
5c2e5c5c 73627355 306e6163 00000000 01e04250 1000899b
100089ac 80546c60 00000008 8053e7ac 10026530 00000000
1002e8e0 0000dac4 00000000 00000000