If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
invalid hibernation partition/file????
Received a donated laptop for our local historical society.
Reformatted HD, everything worked/loaded, but when I restart system it locks up, no keyboard, nothing with the following msg. "Invalid hibernation partition/file run hd-----" I can get into BIOS, using Del key, but that's it. I've tried to use the startup floppy that was created during Win install but no go. I've put in the win98se cd and still nothing. Is this a win98se problem or did I do something? |
#2
|
|||
|
|||
invalid hibernation partition/file????
See he http://www.cybertechhelp.com/forums/...ad.php?t=33474
Let us know how it goes, OK? -- Gary S. Terhune MS-MVP Shell/User www.grystmill.com "L.S." wrote in message ... Received a donated laptop for our local historical society. Reformatted HD, everything worked/loaded, but when I restart system it locks up, no keyboard, nothing with the following msg. "Invalid hibernation partition/file run hd-----" I can get into BIOS, using Del key, but that's it. I've tried to use the startup floppy that was created during Win install but no go. I've put in the win98se cd and still nothing. Is this a win98se problem or did I do something? |
#3
|
|||
|
|||
invalid hibernation partition/file????
Followed link.
Problem is there is no such option. Nothing looks close to an auto Save-to-file option. "Gary S. Terhune" none wrote in message ... See he http://www.cybertechhelp.com/forums/...ad.php?t=33474 Let us know how it goes, OK? -- Gary S. Terhune MS-MVP Shell/User www.grystmill.com "L.S." wrote in message ... Received a donated laptop for our local historical society. Reformatted HD, everything worked/loaded, but when I restart system it locks up, no keyboard, nothing with the following msg. "Invalid hibernation partition/file run hd-----" I can get into BIOS, using Del key, but that's it. I've tried to use the startup floppy that was created during Win install but no go. I've put in the win98se cd and still nothing. Is this a win98se problem or did I do something? |
#4
|
|||
|
|||
invalid hibernation partition/file????
My suggestion is to get a copy of BootIt NG from www.bootitng.com. No need
to pay, just download the EXE, make a bootable floppy or CD installer, reboot to the floppy or CD and then CANCEL THE INSTALLATION! That will drop you into Maintenance Mode where you can choose Partition Work. See what's listed there in the middle panel. More than just the one partition where you installed Win98? If so, please list them for us here, including name, size, type. What's the make/model of the machine? -- Gary S. Terhune MS-MVP Shell/User www.grystmill.com "L.S." wrote in message ... Followed link. Problem is there is no such option. Nothing looks close to an auto Save-to-file option. "Gary S. Terhune" none wrote in message ... See he http://www.cybertechhelp.com/forums/...ad.php?t=33474 Let us know how it goes, OK? -- Gary S. Terhune MS-MVP Shell/User www.grystmill.com "L.S." wrote in message ... Received a donated laptop for our local historical society. Reformatted HD, everything worked/loaded, but when I restart system it locks up, no keyboard, nothing with the following msg. "Invalid hibernation partition/file run hd-----" I can get into BIOS, using Del key, but that's it. I've tried to use the startup floppy that was created during Win install but no go. I've put in the win98se cd and still nothing. Is this a win98se problem or did I do something? |
#5
|
|||
|
|||
invalid hibernation partition/file????
Sorry, that download from BootIt NG is a ZIP file. Unzip that to a new
folder and then run BOOTITNG.EXE file in that folder. -- Gary S. Terhune MS-MVP Shell/User www.grystmill.com "Gary S. Terhune" none wrote in message ... My suggestion is to get a copy of BootIt NG from www.bootitng.com. No need to pay, just download the EXE, make a bootable floppy or CD installer, reboot to the floppy or CD and then CANCEL THE INSTALLATION! That will drop you into Maintenance Mode where you can choose Partition Work. See what's listed there in the middle panel. More than just the one partition where you installed Win98? If so, please list them for us here, including name, size, type. What's the make/model of the machine? -- Gary S. Terhune MS-MVP Shell/User www.grystmill.com "L.S." wrote in message ... Followed link. Problem is there is no such option. Nothing looks close to an auto Save-to-file option. "Gary S. Terhune" none wrote in message ... See he http://www.cybertechhelp.com/forums/...ad.php?t=33474 Let us know how it goes, OK? -- Gary S. Terhune MS-MVP Shell/User www.grystmill.com "L.S." wrote in message ... Received a donated laptop for our local historical society. Reformatted HD, everything worked/loaded, but when I restart system it locks up, no keyboard, nothing with the following msg. "Invalid hibernation partition/file run hd-----" I can get into BIOS, using Del key, but that's it. I've tried to use the startup floppy that was created during Win install but no go. I've put in the win98se cd and still nothing. Is this a win98se problem or did I do something? |
#6
|
|||
|
|||
invalid hibernation partition/file????
Here's what I've got.
D/L and copied to a floppy BootItng.exe. (had to d/l on another system) Made a bootable floppy when I installed Win98se. Problem is, Iv'e set BIOS to read floppy 1st, Cd 2nd and then HD but this system isn't following instructions. When the system starts, I can't hear either disk running and then I get error msg. I'm confused, when you say to make a bootable floopy unless you're taking about something other than the one I create with win98se. Also, run Bootitng.exe--- how when the system locks up even though I have the bootable floopy in the drive. "Gary S. Terhune" none wrote in message ... Sorry, that download from BootIt NG is a ZIP file. Unzip that to a new folder and then run BOOTITNG.EXE file in that folder. -- Gary S. Terhune MS-MVP Shell/User www.grystmill.com "Gary S. Terhune" none wrote in message ... My suggestion is to get a copy of BootIt NG from www.bootitng.com. No need to pay, just download the EXE, make a bootable floppy or CD installer, reboot to the floppy or CD and then CANCEL THE INSTALLATION! That will drop you into Maintenance Mode where you can choose Partition Work. See what's listed there in the middle panel. More than just the one partition where you installed Win98? If so, please list them for us here, including name, size, type. What's the make/model of the machine? -- Gary S. Terhune MS-MVP Shell/User www.grystmill.com "L.S." wrote in message ... Followed link. Problem is there is no such option. Nothing looks close to an auto Save-to-file option. "Gary S. Terhune" none wrote in message ... See he http://www.cybertechhelp.com/forums/...ad.php?t=33474 Let us know how it goes, OK? -- Gary S. Terhune MS-MVP Shell/User www.grystmill.com "L.S." wrote in message ... Received a donated laptop for our local historical society. Reformatted HD, everything worked/loaded, but when I restart system it locks up, no keyboard, nothing with the following msg. "Invalid hibernation partition/file run hd-----" I can get into BIOS, using Del key, but that's it. I've tried to use the startup floppy that was created during Win install but no go. I've put in the win98se cd and still nothing. Is this a win98se problem or did I do something? |
#7
|
|||
|
|||
invalid hibernation partition/file????
You run BOOTITNG.EXE on the system you used to download it, and it make's
its own bootable floppy (or CD.) You then put that floppy in the problem machine and boot to it. Once it finishes loading, the first dialogue you get will be to install BootIt NG (BING) and that's where you Cancel the installation. Sorry for the less than clear instructions. -- Gary S. Terhune MS-MVP Shell/User www.grystmill.com "L.S." wrote in message ... Here's what I've got. D/L and copied to a floppy BootItng.exe. (had to d/l on another system) Made a bootable floppy when I installed Win98se. Problem is, Iv'e set BIOS to read floppy 1st, Cd 2nd and then HD but this system isn't following instructions. When the system starts, I can't hear either disk running and then I get error msg. I'm confused, when you say to make a bootable floopy unless you're taking about something other than the one I create with win98se. Also, run Bootitng.exe--- how when the system locks up even though I have the bootable floopy in the drive. "Gary S. Terhune" none wrote in message ... Sorry, that download from BootIt NG is a ZIP file. Unzip that to a new folder and then run BOOTITNG.EXE file in that folder. -- Gary S. Terhune MS-MVP Shell/User www.grystmill.com "Gary S. Terhune" none wrote in message ... My suggestion is to get a copy of BootIt NG from www.bootitng.com. No need to pay, just download the EXE, make a bootable floppy or CD installer, reboot to the floppy or CD and then CANCEL THE INSTALLATION! That will drop you into Maintenance Mode where you can choose Partition Work. See what's listed there in the middle panel. More than just the one partition where you installed Win98? If so, please list them for us here, including name, size, type. What's the make/model of the machine? -- Gary S. Terhune MS-MVP Shell/User www.grystmill.com "L.S." wrote in message ... Followed link. Problem is there is no such option. Nothing looks close to an auto Save-to-file option. "Gary S. Terhune" none wrote in message ... See he http://www.cybertechhelp.com/forums/...ad.php?t=33474 Let us know how it goes, OK? -- Gary S. Terhune MS-MVP Shell/User www.grystmill.com "L.S." wrote in message ... Received a donated laptop for our local historical society. Reformatted HD, everything worked/loaded, but when I restart system it locks up, no keyboard, nothing with the following msg. "Invalid hibernation partition/file run hd-----" I can get into BIOS, using Del key, but that's it. I've tried to use the startup floppy that was created during Win install but no go. I've put in the win98se cd and still nothing. Is this a win98se problem or did I do something? |
#8
|
|||
|
|||
invalid hibernation partition/file????
Followed your instructions but still no go.
I went into BIOS and set floopy to be "1st Boot Device", inserted floppy and restarted system. After intitial startup, goes straight to error msg. "Gary S. Terhune" none wrote in message ... You run BOOTITNG.EXE on the system you used to download it, and it make's its own bootable floppy (or CD.) You then put that floppy in the problem machine and boot to it. Once it finishes loading, the first dialogue you get will be to install BootIt NG (BING) and that's where you Cancel the installation. Sorry for the less than clear instructions. -- Gary S. Terhune MS-MVP Shell/User www.grystmill.com "L.S." wrote in message ... Here's what I've got. D/L and copied to a floppy BootItng.exe. (had to d/l on another system) Made a bootable floppy when I installed Win98se. Problem is, Iv'e set BIOS to read floppy 1st, Cd 2nd and then HD but this system isn't following instructions. When the system starts, I can't hear either disk running and then I get error msg. I'm confused, when you say to make a bootable floopy unless you're taking about something other than the one I create with win98se. Also, run Bootitng.exe--- how when the system locks up even though I have the bootable floopy in the drive. "Gary S. Terhune" none wrote in message ... Sorry, that download from BootIt NG is a ZIP file. Unzip that to a new folder and then run BOOTITNG.EXE file in that folder. -- Gary S. Terhune MS-MVP Shell/User www.grystmill.com "Gary S. Terhune" none wrote in message ... My suggestion is to get a copy of BootIt NG from www.bootitng.com. No need to pay, just download the EXE, make a bootable floppy or CD installer, reboot to the floppy or CD and then CANCEL THE INSTALLATION! That will drop you into Maintenance Mode where you can choose Partition Work. See what's listed there in the middle panel. More than just the one partition where you installed Win98? If so, please list them for us here, including name, size, type. What's the make/model of the machine? -- Gary S. Terhune MS-MVP Shell/User www.grystmill.com "L.S." wrote in message ... Followed link. Problem is there is no such option. Nothing looks close to an auto Save-to-file option. "Gary S. Terhune" none wrote in message ... See he http://www.cybertechhelp.com/forums/...ad.php?t=33474 Let us know how it goes, OK? -- Gary S. Terhune MS-MVP Shell/User www.grystmill.com "L.S." wrote in message ... Received a donated laptop for our local historical society. Reformatted HD, everything worked/loaded, but when I restart system it locks up, no keyboard, nothing with the following msg. "Invalid hibernation partition/file run hd-----" I can get into BIOS, using Del key, but that's it. I've tried to use the startup floppy that was created during Win install but no go. I've put in the win98se cd and still nothing. Is this a win98se problem or did I do something? |
#9
|
|||
|
|||
invalid hibernation partition/file????
What is the make/model of the machine?
-- Gary S. Terhune MS-MVP Shell/User www.grystmill.com "L." wrote in message ... Followed your instructions but still no go. I went into BIOS and set floopy to be "1st Boot Device", inserted floppy and restarted system. After intitial startup, goes straight to error msg. "Gary S. Terhune" none wrote in message ... You run BOOTITNG.EXE on the system you used to download it, and it make's its own bootable floppy (or CD.) You then put that floppy in the problem machine and boot to it. Once it finishes loading, the first dialogue you get will be to install BootIt NG (BING) and that's where you Cancel the installation. Sorry for the less than clear instructions. -- Gary S. Terhune MS-MVP Shell/User www.grystmill.com "L.S." wrote in message ... Here's what I've got. D/L and copied to a floppy BootItng.exe. (had to d/l on another system) Made a bootable floppy when I installed Win98se. Problem is, Iv'e set BIOS to read floppy 1st, Cd 2nd and then HD but this system isn't following instructions. When the system starts, I can't hear either disk running and then I get error msg. I'm confused, when you say to make a bootable floopy unless you're taking about something other than the one I create with win98se. Also, run Bootitng.exe--- how when the system locks up even though I have the bootable floopy in the drive. "Gary S. Terhune" none wrote in message ... Sorry, that download from BootIt NG is a ZIP file. Unzip that to a new folder and then run BOOTITNG.EXE file in that folder. -- Gary S. Terhune MS-MVP Shell/User www.grystmill.com "Gary S. Terhune" none wrote in message ... My suggestion is to get a copy of BootIt NG from www.bootitng.com. No need to pay, just download the EXE, make a bootable floppy or CD installer, reboot to the floppy or CD and then CANCEL THE INSTALLATION! That will drop you into Maintenance Mode where you can choose Partition Work. See what's listed there in the middle panel. More than just the one partition where you installed Win98? If so, please list them for us here, including name, size, type. What's the make/model of the machine? -- Gary S. Terhune MS-MVP Shell/User www.grystmill.com "L.S." wrote in message ... Followed link. Problem is there is no such option. Nothing looks close to an auto Save-to-file option. "Gary S. Terhune" none wrote in message ... See he http://www.cybertechhelp.com/forums/...ad.php?t=33474 Let us know how it goes, OK? -- Gary S. Terhune MS-MVP Shell/User www.grystmill.com "L.S." wrote in message ... Received a donated laptop for our local historical society. Reformatted HD, everything worked/loaded, but when I restart system it locks up, no keyboard, nothing with the following msg. "Invalid hibernation partition/file run hd-----" I can get into BIOS, using Del key, but that's it. I've tried to use the startup floppy that was created during Win install but no go. I've put in the win98se cd and still nothing. Is this a win98se problem or did I do something? |
#10
|
|||
|
|||
invalid hibernation partition/file????
Sorry for the delays, work.
Not sure exactly what make this thing is.No markings on case. The only info is on a plate on bottom of system and it's stated "Personal Computer Model No. N340S8". Another problem is that this was donated and they isn't any disks, etc. that came with it. "Gary S. Terhune" none wrote in message ... What is the make/model of the machine? -- Gary S. Terhune MS-MVP Shell/User www.grystmill.com "L." wrote in message ... Followed your instructions but still no go. I went into BIOS and set floopy to be "1st Boot Device", inserted floppy and restarted system. After intitial startup, goes straight to error msg. "Gary S. Terhune" none wrote in message ... You run BOOTITNG.EXE on the system you used to download it, and it make's its own bootable floppy (or CD.) You then put that floppy in the problem machine and boot to it. Once it finishes loading, the first dialogue you get will be to install BootIt NG (BING) and that's where you Cancel the installation. Sorry for the less than clear instructions. -- Gary S. Terhune MS-MVP Shell/User www.grystmill.com "L.S." wrote in message ... Here's what I've got. D/L and copied to a floppy BootItng.exe. (had to d/l on another system) Made a bootable floppy when I installed Win98se. Problem is, Iv'e set BIOS to read floppy 1st, Cd 2nd and then HD but this system isn't following instructions. When the system starts, I can't hear either disk running and then I get error msg. I'm confused, when you say to make a bootable floopy unless you're taking about something other than the one I create with win98se. Also, run Bootitng.exe--- how when the system locks up even though I have the bootable floopy in the drive. "Gary S. Terhune" none wrote in message ... Sorry, that download from BootIt NG is a ZIP file. Unzip that to a new folder and then run BOOTITNG.EXE file in that folder. -- Gary S. Terhune MS-MVP Shell/User www.grystmill.com "Gary S. Terhune" none wrote in message ... My suggestion is to get a copy of BootIt NG from www.bootitng.com. No need to pay, just download the EXE, make a bootable floppy or CD installer, reboot to the floppy or CD and then CANCEL THE INSTALLATION! That will drop you into Maintenance Mode where you can choose Partition Work. See what's listed there in the middle panel. More than just the one partition where you installed Win98? If so, please list them for us here, including name, size, type. What's the make/model of the machine? -- Gary S. Terhune MS-MVP Shell/User www.grystmill.com "L.S." wrote in message ... Followed link. Problem is there is no such option. Nothing looks close to an auto Save-to-file option. "Gary S. Terhune" none wrote in message ... See he http://www.cybertechhelp.com/forums/...ad.php?t=33474 Let us know how it goes, OK? -- Gary S. Terhune MS-MVP Shell/User www.grystmill.com "L.S." wrote in message ... Received a donated laptop for our local historical society. Reformatted HD, everything worked/loaded, but when I restart system it locks up, no keyboard, nothing with the following msg. "Invalid hibernation partition/file run hd-----" I can get into BIOS, using Del key, but that's it. I've tried to use the startup floppy that was created during Win install but no go. I've put in the win98se cd and still nothing. Is this a win98se problem or did I do something? |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
your hibernation file is missing or corrupted... | Jetson | General | 1 | February 6th 06 11:01 AM |
Hibernation | RMV | General | 3 | March 12th 05 08:09 PM |
Hibernation? | someone | General | 1 | September 26th 04 04:59 PM |
Hibernation | someone | General | 1 | September 25th 04 02:39 AM |
How to force driver to remount file system, when content of raw partition has changed?? | Egorov Dmitry | Disk Drives | 1 | July 20th 04 08:19 PM |