A Windows 98 & ME forum. Win98banter

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » Win98banter forum » Windows ME » General
Site Map Home Authors List Search Today's Posts Mark Forums Read Web Partners

Dx9 redist for ME



 
 
Thread Tools Display Modes
  #1  
Old February 5th 09, 01:04 AM posted to microsoft.public.windowsme.general
Noel Paton[_2_]
External Usenet User
 
Posts: 46
Default Dx9 redist for ME

Anyone know what the latest applicable Dx9 update for ME is?

I can find a reference to ME in the April 2007 update, but it's not in the
list of supported OS's


--
Noel Paton (MVP 2002-2006)
(CrashFixPC)

Nil Carborundum Illegitemi
http://www.crashfixpc.co.uk


  #2  
Old February 5th 09, 01:46 AM posted to microsoft.public.windowsme.general
Mart
External Usenet User
 
Posts: 1,190
Default Dx9 redist for ME

Both my WinMe boxes show Dx9.0c (4.09.0000.0904). Latest dated file (I can
find) is 2004 and AFAIK they were both updated to the 'latest' version using
the WinMe AU early last year. The update history confirms that @ 27 March
2008

Mart


"Noel Paton" wrote in message
...
Anyone know what the latest applicable Dx9 update for ME is?

I can find a reference to ME in the April 2007 update, but it's not in the
list of supported OS's


--
Noel Paton (MVP 2002-2006)
(CrashFixPC)

Nil Carborundum Illegitemi
http://www.crashfixpc.co.uk



  #3  
Old February 5th 09, 02:18 AM posted to microsoft.public.windowsme.general
Noel Paton[_2_]
External Usenet User
 
Posts: 46
Default Dx9 redist for ME

Thanks, Mart - The Dx9c is a bit of a pain - there's a new version every 2
months!
I'm going to have a go with a later version in a VM and see if it installs -
will report back.

--
Noel Paton (MVP 2002-2006)
(CrashFixPC)

Nil Carborundum Illegitemi
http://www.crashfixpc.co.uk
"Mart" wrote in message
...
Both my WinMe boxes show Dx9.0c (4.09.0000.0904). Latest dated file (I can
find) is 2004 and AFAIK they were both updated to the 'latest' version
using the WinMe AU early last year. The update history confirms that @ 27
March 2008

Mart


"Noel Paton" wrote in message
...
Anyone know what the latest applicable Dx9 update for ME is?

I can find a reference to ME in the April 2007 update, but it's not in
the list of supported OS's


--
Noel Paton (MVP 2002-2006)
(CrashFixPC)

Nil Carborundum Illegitemi
http://www.crashfixpc.co.uk





  #4  
Old February 5th 09, 02:30 AM posted to microsoft.public.windowsme.general
Mart
External Usenet User
 
Posts: 1,190
Default Dx9 redist for ME

Yes Noel, and perhaps I should have qualified my statement "they were both
updated to the 'latest' version" - following a clean install. So WU doesn't
'appear' to want to update it further. It will be interesting to see if you
can get it to accept anything later.

Mart




"Noel Paton" wrote in message
...
Thanks, Mart - The Dx9c is a bit of a pain - there's a new version every 2
months!
I'm going to have a go with a later version in a VM and see if it
installs - will report back.

--
Noel Paton (MVP 2002-2006)
(CrashFixPC)

Nil Carborundum Illegitemi
http://www.crashfixpc.co.uk
"Mart" wrote in message
...
Both my WinMe boxes show Dx9.0c (4.09.0000.0904). Latest dated file (I
can find) is 2004 and AFAIK they were both updated to the 'latest'
version using the WinMe AU early last year. The update history confirms
that @ 27 March 2008

Mart


"Noel Paton" wrote in message
...
Anyone know what the latest applicable Dx9 update for ME is?

I can find a reference to ME in the April 2007 update, but it's not in
the list of supported OS's


--
Noel Paton (MVP 2002-2006)
(CrashFixPC)

Nil Carborundum Illegitemi
http://www.crashfixpc.co.uk







  #5  
Old February 5th 09, 02:44 AM posted to microsoft.public.windowsme.general
Noel Paton[_2_]
External Usenet User
 
Posts: 46
Default Dx9 redist for ME

.... Uh Oh! - 'DirectX could not find a file required for installation' - any
bets on the file being NTDLL.DLL??
....ahah! - apparently it needs mscoree.dll (.NET)
..... more later....

--
Noel Paton (MVP 2002-2006)
(CrashFixPC)

Nil Carborundum Illegitemi
http://www.crashfixpc.co.uk
"Mart" wrote in message
...
Yes Noel, and perhaps I should have qualified my statement "they were both
updated to the 'latest' version" - following a clean install. So WU
doesn't 'appear' to want to update it further. It will be interesting to
see if you can get it to accept anything later.

Mart




"Noel Paton" wrote in message
...
Thanks, Mart - The Dx9c is a bit of a pain - there's a new version every
2 months!
I'm going to have a go with a later version in a VM and see if it
installs - will report back.

--
Noel Paton (MVP 2002-2006)
(CrashFixPC)

Nil Carborundum Illegitemi
http://www.crashfixpc.co.uk
"Mart" wrote in message
...
Both my WinMe boxes show Dx9.0c (4.09.0000.0904). Latest dated file (I
can find) is 2004 and AFAIK they were both updated to the 'latest'
version using the WinMe AU early last year. The update history confirms
that @ 27 March 2008

Mart


"Noel Paton" wrote in message
...
Anyone know what the latest applicable Dx9 update for ME is?

I can find a reference to ME in the April 2007 update, but it's not in
the list of supported OS's


--
Noel Paton (MVP 2002-2006)
(CrashFixPC)

Nil Carborundum Illegitemi
http://www.crashfixpc.co.uk









  #6  
Old February 5th 09, 03:43 AM posted to microsoft.public.windowsme.general
Noel Paton[_2_]
External Usenet User
 
Posts: 46
Default Dx9 redist for ME

Install .Net 1.1 - only to get
...."Cabinet file for core components is not available but it's necessary for
installation"....
at this point in the install of Dx9b, it was looking for 'bdasesetup.inf'
in a .cab file - so it looks as if they've removed the ME INF portion from
the installer
..... June 2005 installs OK (with .Net installed)
.....June 2006 actually states it supports ME! (will try tomorrow)
....Dec 2006 - downloading now for install tomorrow - no mention of ME in the
supports list

--
Noel Paton (MVP 2002-2006)
(CrashFixPC)

Nil Carborundum Illegitemi
http://www.crashfixpc.co.uk
"Noel Paton" wrote in message
...
... Uh Oh! - 'DirectX could not find a file required for installation' -
any bets on the file being NTDLL.DLL??
...ahah! - apparently it needs mscoree.dll (.NET)
.... more later....

--
Noel Paton (MVP 2002-2006)
(CrashFixPC)

Nil Carborundum Illegitemi
http://www.crashfixpc.co.uk
"Mart" wrote in message
...
Yes Noel, and perhaps I should have qualified my statement "they were
both updated to the 'latest' version" - following a clean install. So WU
doesn't 'appear' to want to update it further. It will be interesting to
see if you can get it to accept anything later.

Mart




"Noel Paton" wrote in message
...
Thanks, Mart - The Dx9c is a bit of a pain - there's a new version every
2 months!
I'm going to have a go with a later version in a VM and see if it
installs - will report back.

--
Noel Paton (MVP 2002-2006)
(CrashFixPC)

Nil Carborundum Illegitemi
http://www.crashfixpc.co.uk
"Mart" wrote in message
...
Both my WinMe boxes show Dx9.0c (4.09.0000.0904). Latest dated file (I
can find) is 2004 and AFAIK they were both updated to the 'latest'
version using the WinMe AU early last year. The update history confirms
that @ 27 March 2008

Mart



  #7  
Old February 5th 09, 03:59 AM posted to microsoft.public.windowsme.general
Mike M
External Usenet User
 
Posts: 2,047
Default Dx9 redist for ME

DX 9.0x for Win Me is available on WU and I've just downloaded and
installed it on a clean RTM Win Me running in a VM with no need for .NET.
By DX9b do you mean the earlier 9.0b?
--
Mike


Noel Paton wrote:

Install .Net 1.1 - only to get
..."Cabinet file for core components is not available but it's
necessary for installation"....
at this point in the install of Dx9b, it was looking for
'bdasesetup.inf' in a .cab file - so it looks as if they've removed
the ME INF portion from the installer
.... June 2005 installs OK (with .Net installed)
....June 2006 actually states it supports ME! (will try tomorrow)
...Dec 2006 - downloading now for install tomorrow - no mention of ME
in the supports list


  #8  
Old February 5th 09, 04:06 AM posted to microsoft.public.windowsme.general
Noel Paton[_2_]
External Usenet User
 
Posts: 46
Default Dx9 redist for ME

Hmmm - June 2006 will install with OR without .Net installed (over Dx9b - it
requires a reboot either way)
The latest version available before a significant drop in size of the
installer looks to be Dec 2006 - so I'll try that one tomorrow

Th-that's all, folks! (for tonight anyhow)

--
Noel Paton (MVP 2002-2006)
(CrashFixPC)

Nil Carborundum Illegitemi
http://www.crashfixpc.co.uk

"Noel Paton" wrote in message
...
Install .Net 1.1 - only to get
..."Cabinet file for core components is not available but it's necessary
for
installation"....
at this point in the install of Dx9b, it was looking for 'bdasesetup.inf'
in a .cab file - so it looks as if they've removed the ME INF portion from
the installer
.... June 2005 installs OK (with .Net installed)
....June 2006 actually states it supports ME! (will try tomorrow)
...Dec 2006 - downloading now for install tomorrow - no mention of ME in
the supports list

--
Noel Paton (MVP 2002-2006)
(CrashFixPC)

Nil Carborundum Illegitemi
http://www.crashfixpc.co.uk
"Noel Paton" wrote in message
...
... Uh Oh! - 'DirectX could not find a file required for installation' -
any bets on the file being NTDLL.DLL??
...ahah! - apparently it needs mscoree.dll (.NET)
.... more later....

--
Noel Paton (MVP 2002-2006)
(CrashFixPC)

Nil Carborundum Illegitemi
http://www.crashfixpc.co.uk
"Mart" wrote in message
...
Yes Noel, and perhaps I should have qualified my statement "they were
both updated to the 'latest' version" - following a clean install. So WU
doesn't 'appear' to want to update it further. It will be interesting to
see if you can get it to accept anything later.

Mart




"Noel Paton" wrote in message
...
Thanks, Mart - The Dx9c is a bit of a pain - there's a new version
every
2 months!
I'm going to have a go with a later version in a VM and see if it
installs - will report back.

--
Noel Paton (MVP 2002-2006)
(CrashFixPC)

Nil Carborundum Illegitemi
http://www.crashfixpc.co.uk
"Mart" wrote in message
...
Both my WinMe boxes show Dx9.0c (4.09.0000.0904). Latest dated file (I
can find) is 2004 and AFAIK they were both updated to the 'latest'
version using the WinMe AU early last year. The update history
confirms
that @ 27 March 2008

Mart





  #9  
Old February 5th 09, 04:13 AM posted to microsoft.public.windowsme.general
Noel Paton[_2_]
External Usenet User
 
Posts: 46
Default Dx9 redist for ME

yes, Mike
My VM here is 9.0b - v4.09.000.0902
I haven't got around to enabling ICS on the dongle yet, so my ME VM won't do
updates (not that it matters too much) - or I've forgotten how to set up
networking in the VM (which is all too possible!)
glad to see that MS is keeping the v4 updates going, though1

--
Noel Paton (MVP 2002-2006)
(CrashFixPC)

Nil Carborundum Illegitemi
http://www.crashfixpc.co.uk

"Mike M" wrote in message
...
DX 9.0x for Win Me is available on WU and I've just downloaded and
installed it on a clean RTM Win Me running in a VM with no need for .NET.
By DX9b do you mean the earlier 9.0b?
--
Mike


Noel Paton wrote:

Install .Net 1.1 - only to get
..."Cabinet file for core components is not available but it's
necessary for installation"....
at this point in the install of Dx9b, it was looking for 'bdasesetup.inf'
in a .cab file - so it looks as if they've removed
the ME INF portion from the installer
.... June 2005 installs OK (with .Net installed)
....June 2006 actually states it supports ME! (will try tomorrow)
...Dec 2006 - downloading now for install tomorrow - no mention of ME
in the supports list




  #10  
Old February 5th 09, 05:30 AM posted to microsoft.public.windowsme.general
webster72n
External Usenet User
 
Posts: 1,526
Default Dx9 redist for ME

Just for confirmation, that is the version on my machine and the last one to
be updated.

Harry.


"Mart" wrote in message
...
Both my WinMe boxes show Dx9.0c (4.09.0000.0904). Latest dated file (I can
find) is 2004 and AFAIK they were both updated to the 'latest' version
using the WinMe AU early last year. The update history confirms that @ 27
March 2008

Mart


"Noel Paton" wrote in message
...
Anyone know what the latest applicable Dx9 update for ME is?

I can find a reference to ME in the April 2007 update, but it's not in
the list of supported OS's


--
Noel Paton (MVP 2002-2006)
(CrashFixPC)

Nil Carborundum Illegitemi
http://www.crashfixpc.co.uk




 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT +1. The time now is 02:03 PM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 Win98banter.
The comments are property of their posters.