A Windows 98 & ME forum. Win98banter

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » Win98banter forum » Windows 98 » Networking
Site Map Home Authors List Search Today's Posts Mark Forums Read Web Partners

98 to 98/ME w/o internet, a couple of miles apart



 
 
Thread Tools Display Modes
  #1  
Old September 21st 04, 05:14 PM
Greg M
external usenet poster
 
Posts: n/a
Default 98 to 98/ME w/o internet, a couple of miles apart

G'day,

I'm looking for a site for info. I've Googled, I don't seem to pare
down the selection.

A buddy wants to access his home comp from his office. They're either
both W98 or one's wME. No security issues on either end. He's a one man
shop.

He just wants to access the home computer and maybe the other way
around. No internet access is wanted. Both computers are in the same
area code, it's all local phone access. There's a modem on each end, no
network cards, routers. Probably not even a firewall (s/w).

If someone has a site they like that can explain it, I'd appreciate it.

  #2  
Old September 21st 04, 06:30 PM
Haggis
external usenet poster
 
Posts: n/a
Default


"Greg M" wrote in message
...
G'day,

I'm looking for a site for info. I've Googled, I don't seem to pare
down the selection.

A buddy wants to access his home comp from his office. They're either
both W98 or one's wME. No security issues on either end. He's a one man
shop.

He just wants to access the home computer and maybe the other way
around. No internet access is wanted. Both computers are in the same
area code, it's all local phone access. There's a modem on each end, no
network cards, routers. Probably not even a firewall (s/w).

If someone has a site they like that can explain it, I'd appreciate it.


PCanywhere :


  #3  
Old September 22nd 04, 04:18 AM
Greg M
external usenet poster
 
Posts: n/a
Default

- "Haggis" - spluttered in
:


"Greg M" wrote in message
...
G'day,

I'm looking for a site for info. I've Googled, I don't seem to
pare down the selection.

A buddy wants to access his home comp from his office. They're
either both W98 or one's wME. No security issues on either end.
He's a one man shop.

He just wants to access the home computer and maybe the other way
around. No internet access is wanted. Both computers are in the
same area code, it's all local phone access. There's a modem on
each end, no network cards, routers. Probably not even a firewall
(s/w).

If someone has a site they like that can explain it, I'd
appreciate it.


PCanywhere :


Thanks. Can PCanywhere be configured to not use the internet?
  #4  
Old September 22nd 04, 01:15 PM
Haggis
external usenet poster
 
Posts: n/a
Default


"Greg M" wrote in message
...
- "Haggis" - spluttered in
:


"Greg M" wrote in message
...
G'day,

I'm looking for a site for info. I've Googled, I don't seem to
pare down the selection.

A buddy wants to access his home comp from his office. They're
either both W98 or one's wME. No security issues on either end.
He's a one man shop.

He just wants to access the home computer and maybe the other way
around. No internet access is wanted. Both computers are in the
same area code, it's all local phone access. There's a modem on
each end, no network cards, routers. Probably not even a firewall
(s/w).

If someone has a site they like that can explain it, I'd
appreciate it.


PCanywhere :


Thanks. Can PCanywhere be configured to not use the internet?


I used to use it to remote control a computer at work from home , just a
phone line and modems (although it can be configured a number of ways)

http://www.symantec.com/pcanywhere/Consumer/


  #5  
Old September 22nd 04, 03:15 PM
Greg M
external usenet poster
 
Posts: n/a
Default

- "Haggis" - spluttered in
:


"Greg M" wrote in message
...
- "Haggis" - spluttered in
:


"Greg M" wrote in message
...
G'day,

I'm looking for a site for info. I've Googled, I don't seem to
pare down the selection.

A buddy wants to access his home comp from his office. They're
either both W98 or one's wME. No security issues on either end.
He's a one man shop.

He just wants to access the home computer and maybe the other
way around. No internet access is wanted. Both computers are in
the same area code, it's all local phone access. There's a
modem on each end, no network cards, routers. Probably not even
a firewall (s/w).

If someone has a site they like that can explain it, I'd
appreciate it.


PCanywhere :


Thanks. Can PCanywhere be configured to not use the internet?


I used to use it to remote control a computer at work from home ,
just a phone line and modems (although it can be configured a
number of ways)

http://www.symantec.com/pcanywhere/Consumer/


Thanks again.

In Control Panel-Add/Remove Programs-Windows Setup-Communications
there is a Dial-Up Server (W98), which is the logical complement of
Dial-Up Networking.
  #6  
Old September 22nd 04, 03:32 PM
Haggis
external usenet poster
 
Posts: n/a
Default


"Greg M" wrote in message
...
- "Haggis" - spluttered in
:


"Greg M" wrote in message
...
- "Haggis" - spluttered in
:


"Greg M" wrote in message
...
G'day,

I'm looking for a site for info. I've Googled, I don't seem to
pare down the selection.

A buddy wants to access his home comp from his office. They're
either both W98 or one's wME. No security issues on either end.
He's a one man shop.

He just wants to access the home computer and maybe the other
way around. No internet access is wanted. Both computers are in
the same area code, it's all local phone access. There's a
modem on each end, no network cards, routers. Probably not even
a firewall (s/w).

If someone has a site they like that can explain it, I'd
appreciate it.


PCanywhere :

Thanks. Can PCanywhere be configured to not use the internet?


I used to use it to remote control a computer at work from home ,
just a phone line and modems (although it can be configured a
number of ways)

http://www.symantec.com/pcanywhere/Consumer/


Thanks again.

In Control Panel-Add/Remove Programs-Windows Setup-Communications
there is a Dial-Up Server (W98), which is the logical complement of
Dial-Up Networking.


if you have modem installed , dial-up networking is automatically installed
.....

when you install PCanywhere , you set the modem/PCanywhere client to listen
for the phone ...then you go home and dial the modem with pcanywhere ,
connect , login and you see your computer at work :

have fun!


  #7  
Old September 22nd 04, 09:54 PM
Greg M
external usenet poster
 
Posts: n/a
Default

- "Haggis" - spluttered in
:

Thanks again.

In Control Panel-Add/Remove Programs-Windows
Setup-Communications there is a Dial-Up Server (W98), which is
the logical complement of Dial-Up Networking.


if you have modem installed , dial-up networking is automatically
installed ....

when you install PCanywhere , you set the modem/PCanywhere client
to listen for the phone ...then you go home and dial the modem
with pcanywhere , connect , login and you see your computer at
work :


thanks. As I said everything I want is in Windows. Price $0, PCanywhere
$125.
  #8  
Old September 22nd 04, 10:10 PM
CJT
external usenet poster
 
Posts: n/a
Default

Greg M wrote:
- "Haggis" - spluttered in
:


Thanks again.

In Control Panel-Add/Remove Programs-Windows
Setup-Communications there is a Dial-Up Server (W98), which is
the logical complement of Dial-Up Networking.


if you have modem installed , dial-up networking is automatically
installed ....

when you install PCanywhere , you set the modem/PCanywhere client
to listen for the phone ...then you go home and dial the modem
with pcanywhere , connect , login and you see your computer at
work :



thanks. As I said everything I want is in Windows. Price $0, PCanywhere
$125.


So what was the point of the query?
--
The e-mail address in our reply-to line is reversed in an attempt to
minimize spam. Our true address is of the form .
  #9  
Old September 23rd 04, 12:35 AM
Greg M
external usenet poster
 
Posts: n/a
Default

- CJT - spluttered in
:

Greg M wrote:
- "Haggis" - spluttered in
:


Thanks again.


In Control Panel-Add/Remove Programs-Windows
Setup-Communications there is a Dial-Up Server (W98), which is
the logical complement of Dial-Up Networking.


if you have modem installed , dial-up networking is automatically
installed ....


when you install PCanywhere , you set the modem/PCanywhere client
to listen for the phone ...then you go home and dial the modem
with pcanywhere , connect , login and you see your computer at
work :


thanks. As I said everything I want is in Windows. Price $0,
PCanywhere $125.


So what was the point of the query?


The point is now perhaps a similar request will be archived on Google.
Using the word "networking" in a querry got me (1M hits) to a few top
networking "how-to" sites. But no one mentioned it. And to a few
networking forums, no one mentioned it. A few people said it couldn't
be done.

The biggest point was I didn't want to instruct someone how to set up a
firewall(s) and maintain them. On two machines - at that.

I spent perhaps 4-5 hours finding the answer.
  #10  
Old September 23rd 04, 01:20 PM
Haggis
external usenet poster
 
Posts: n/a
Default


"Greg M" wrote in message
...
- CJT - spluttered in
:

Greg M wrote:
- "Haggis" - spluttered in
:


Thanks again.


In Control Panel-Add/Remove Programs-Windows
Setup-Communications there is a Dial-Up Server (W98), which is
the logical complement of Dial-Up Networking.


if you have modem installed , dial-up networking is automatically
installed ....


when you install PCanywhere , you set the modem/PCanywhere client
to listen for the phone ...then you go home and dial the modem
with pcanywhere , connect , login and you see your computer at
work :


thanks. As I said everything I want is in Windows. Price $0,
PCanywhere $125.


So what was the point of the query?


The point is now perhaps a similar request will be archived on Google.
Using the word "networking" in a querry got me (1M hits) to a few top
networking "how-to" sites. But no one mentioned it. And to a few
networking forums, no one mentioned it. A few people said it couldn't
be done.

The biggest point was I didn't want to instruct someone how to set up a
firewall(s) and maintain them. On two machines - at that.

I spent perhaps 4-5 hours finding the answer.


glad you got it worked out :


 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Win98 laptop can't connect to the internet - Help!! BF Networking 2 August 30th 04 05:33 AM
lost internet connection through NIC, now dials modem Stephan General 4 July 22nd 04 04:30 AM
lost internet connection through NIC, now dials modem Stephan Internet 4 July 22nd 04 04:30 AM
Internet Explorer problem Francis Marsden General 8 June 15th 04 07:59 PM
Internet usage slows PC bgaard General 9 June 13th 04 04:56 PM


All times are GMT +1. The time now is 07:09 AM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 Win98banter.
The comments are property of their posters.