Can't recognize the USB mass storage device

My Platform can recognize a small size USB mass storage device ,but cannot
with the bigger one

Perhaps this will be helpful:

"Very large HD's as of Feb 2003

Please visit maxtor and look at their FAQ about 200GB drives.
http://maxtor.custhelp.com/cgi-bin/m...a=&p_sp=&p_li=

Typically, these large drives are still mostly not supported by
motherboards and operating systems.
Drives over 137 GB (or 127.5GB ) requires use of extended interrupt 13 with
48 bit addressing.

Typically the easiest way to use a 200GB drive on a win98 system is to use a
separate IDE interface card for the drive.
--
Jon Hildrum
DTS MVP

www.hildrum.com

--
Jack E. Martinelli 2002-05 MS MVP for Shell/User / DTS
Help us help you: http://www.dts-L.org/goodpost.htm

http://www.microsoft.com/athome/secu...t/default.aspx
In Memorium: Alex Nichol
http://www.microsoft.com/windowsxp/e...ts/nichol.mspx
Your cooperation is very appreciated.
------
"freasy" wrote in message
...
My Platform can recognize a small size USB mass storage device ,but cannot
with the bigger one