Repost: new info - Win 3.11, 98 & XP networking

3.11/XP/98 advice, please. I can't find an existing relevant topic.

I've connected my ageing Toshiba laptop (Win 3.11), using a 3-com Etherlink
III LAN PC card, to my Sony PCG-FX203 (either on-board Ethernet adaptor or
same 3-com card as the Toshiba) - it's on XP.

I've managed to get 3-com software compatible with the Toshiba and load it.
I'm now trying to set up a network connection, using a cross-wired Ethernet
cable.

Once it's up and running, I want to incorporate the 3.11 Toshiba into my
XP/98 existing network.

Question, please. Where do I go now with the 3.11 setup? I've got the
IPX/SPX NetBios protocol loaded in the XP network connection - is this the
correct one to use? I can't yet get the Sony to "see" the Toshiba, nor vice
versa. The green led on the 3-com interface module isn't on or flashing,
either.

As you can see, I'm still somewhat in the dark - I'd appreciate any help you
may be able to give.

If I'm on the wrong ng, can you point me in the right direction?

Peter:

Another helpful site:

http://www.windowsnetworking.com/j_helmig/win3x.htm

http://www.windowsnetworking.com/j_helmig/wfw311.htm
--
\\\\\//
"Don't take life so seriously... | |
...it's only a temporary condition." (.) (.)
========================================oOO==(_)== OOo==
_____________________________________________
| John G. Dulak |
| Gnomeway Services |
/)| E-mail me from my home page at: |(\
/ )| http://users.telerama.com/~jdulak/email.htm |( \
( (|____________________________________________ |) )_
((( \ \ /_) ( \ / / )))
(\\\ \ \_/ / \ \_/ / ///)
\ / \ /
\ _/ \_ /
/ / \ \

Peter:

Another helpful site:

http://www.windowsnetworking.com/j_helmig/win3x.htm

http://www.windowsnetworking.com/j_helmig/wfw311.htm
--
\\\\\//
"Don't take life so seriously... | |
...it's only a temporary condition." (.) (.)
========================================oOO==(_)== OOo==
_____________________________________________
| John G. Dulak |
| Gnomeway Services |
/)| E-mail me from my home page at: |(\
/ )| http://users.telerama.com/~jdulak/email.htm |( \
( (|____________________________________________ |) )_
((( \ \ /_) ( \ / / )))
(\\\ \ \_/ / \ \_/ / ///)
\ / \ /
\ _/ \_ /
/ / \ \

"John Dulak" wrote in message
...
Peter:

Another helpful site:

http://www.windowsnetworking.com/j_helmig/win3x.htm

http://www.windowsnetworking.com/j_helmig/wfw311.htm
--
John - thanks again - working on it! I'll respond to the group with
progress!

"John Dulak" wrote in message
...
Peter:

Another helpful site:

http://www.windowsnetworking.com/j_helmig/win3x.htm

http://www.windowsnetworking.com/j_helmig/wfw311.htm
--
John - thanks again - working on it! I'll respond to the group with
progress!

In article , "Peter"
wrote:
3.11/XP/98 advice, please. I can't find an existing relevant topic.

I've connected my ageing Toshiba laptop (Win 3.11), using a 3-com Etherlink
III LAN PC card, to my Sony PCG-FX203 (either on-board Ethernet adaptor or
same 3-com card as the Toshiba) - it's on XP.

I've managed to get 3-com software compatible with the Toshiba and load it.
I'm now trying to set up a network connection, using a cross-wired Ethernet
cable.

Once it's up and running, I want to incorporate the 3.11 Toshiba into my
XP/98 existing network.

Question, please. Where do I go now with the 3.11 setup? I've got the
IPX/SPX NetBios protocol loaded in the XP network connection - is this the
correct one to use? I can't yet get the Sony to "see" the Toshiba, nor vice
versa. The green led on the 3-com interface module isn't on or flashing,
either.

As you can see, I'm still somewhat in the dark - I'd appreciate any help you
may be able to give.

If I'm on the wrong ng, can you point me in the right direction?

Remove IPX/SPX from XP, and use TCP/IP as the only network protocol.
To add TCP/IP to Windows for Workgroups 3.11:

How to Obtain TCP/IP-32 3.11b for Windows for Workgroups
http://support.microsoft.com/?id=99891

Adding MS TCP/IP to WFWG 3.11
http://www.yale.edu/pclt/WINWORLD/WFWG311.HTM
--
Best Wishes,
Steve Winograd, MS-MVP (Windows Networking)

Please post any reply as a follow-up message in the news group
for everyone to see. I'm sorry, but I don't answer questions
addressed directly to me in E-mail or news groups.

Microsoft Most Valuable Professional - Windows Networking
http://mvp.support.microsoft.com

Steve Winograd's Networking FAQ
http://www.bcmaven.com/networking/faq.htm

In article , "Peter"
wrote:
3.11/XP/98 advice, please. I can't find an existing relevant topic.

I've connected my ageing Toshiba laptop (Win 3.11), using a 3-com Etherlink
III LAN PC card, to my Sony PCG-FX203 (either on-board Ethernet adaptor or
same 3-com card as the Toshiba) - it's on XP.

I've managed to get 3-com software compatible with the Toshiba and load it.
I'm now trying to set up a network connection, using a cross-wired Ethernet
cable.

Once it's up and running, I want to incorporate the 3.11 Toshiba into my
XP/98 existing network.

Question, please. Where do I go now with the 3.11 setup? I've got the
IPX/SPX NetBios protocol loaded in the XP network connection - is this the
correct one to use? I can't yet get the Sony to "see" the Toshiba, nor vice
versa. The green led on the 3-com interface module isn't on or flashing,
either.

As you can see, I'm still somewhat in the dark - I'd appreciate any help you
may be able to give.

If I'm on the wrong ng, can you point me in the right direction?

Remove IPX/SPX from XP, and use TCP/IP as the only network protocol.
To add TCP/IP to Windows for Workgroups 3.11:

How to Obtain TCP/IP-32 3.11b for Windows for Workgroups
http://support.microsoft.com/?id=99891

Adding MS TCP/IP to WFWG 3.11
http://www.yale.edu/pclt/WINWORLD/WFWG311.HTM
--
Best Wishes,
Steve Winograd, MS-MVP (Windows Networking)

Please post any reply as a follow-up message in the news group
for everyone to see. I'm sorry, but I don't answer questions
addressed directly to me in E-mail or news groups.

Microsoft Most Valuable Professional - Windows Networking
http://mvp.support.microsoft.com

Steve Winograd's Networking FAQ
http://www.bcmaven.com/networking/faq.htm

"Steve Winograd [MVP]" wrote in message
...
In article , "Peter"
wrote:
3.11/XP/98 advice, please. I can't find an existing relevant topic.

I've connected my ageing Toshiba laptop (Win 3.11), using a 3-com
Etherlink
III LAN PC card, to my Sony PCG-FX203 (either on-board Ethernet adaptor or
same 3-com card as the Toshiba) - it's on XP.

I've managed to get 3-com software compatible with the Toshiba and load
it.
I'm now trying to set up a network connection, using a cross-wired
Ethernet
cable.

Once it's up and running, I want to incorporate the 3.11 Toshiba into my
XP/98 existing network.

Question, please. Where do I go now with the 3.11 setup? I've got the
IPX/SPX NetBios protocol loaded in the XP network connection - is this the
correct one to use? I can't yet get the Sony to "see" the Toshiba, nor
vice
versa. The green led on the 3-com interface module isn't on or flashing,
either.

As you can see, I'm still somewhat in the dark - I'd appreciate any help
you
may be able to give.

If I'm on the wrong ng, can you point me in the right direction?

Remove IPX/SPX from XP, and use TCP/IP as the only network protocol.
To add TCP/IP to Windows for Workgroups 3.11:

How to Obtain TCP/IP-32 3.11b for Windows for Workgroups
http://support.microsoft.com/?id=99891

Adding MS TCP/IP to WFWG 3.11
http://www.yale.edu/pclt/WINWORLD/WFWG311.HTM
--
Best Wishes,
Steve Winograd, MS-MVP (Windows Networking)

Please post any reply as a follow-up message in the news group
for everyone to see. I'm sorry, but I don't answer questions
addressed directly to me in E-mail or news groups.

Microsoft Most Valuable Professional - Windows Networking
http://mvp.support.microsoft.com

Steve Winograd's Networking FAQ
http://www.bcmaven.com/networking/faq.htm

----------------------------------------------------
Brilliant - loads to be geting on with - thanks Steve.

(I'd better tell the wife not to wait up tonight!) ;-)

Peter

"Steve Winograd [MVP]" wrote in message
...
In article , "Peter"
wrote:
3.11/XP/98 advice, please. I can't find an existing relevant topic.

I've connected my ageing Toshiba laptop (Win 3.11), using a 3-com
Etherlink
III LAN PC card, to my Sony PCG-FX203 (either on-board Ethernet adaptor or
same 3-com card as the Toshiba) - it's on XP.

I've managed to get 3-com software compatible with the Toshiba and load
it.
I'm now trying to set up a network connection, using a cross-wired
Ethernet
cable.

Once it's up and running, I want to incorporate the 3.11 Toshiba into my
XP/98 existing network.

Question, please. Where do I go now with the 3.11 setup? I've got the
IPX/SPX NetBios protocol loaded in the XP network connection - is this the
correct one to use? I can't yet get the Sony to "see" the Toshiba, nor
vice
versa. The green led on the 3-com interface module isn't on or flashing,
either.

As you can see, I'm still somewhat in the dark - I'd appreciate any help
you
may be able to give.

If I'm on the wrong ng, can you point me in the right direction?

Remove IPX/SPX from XP, and use TCP/IP as the only network protocol.
To add TCP/IP to Windows for Workgroups 3.11:

How to Obtain TCP/IP-32 3.11b for Windows for Workgroups
http://support.microsoft.com/?id=99891

Adding MS TCP/IP to WFWG 3.11
http://www.yale.edu/pclt/WINWORLD/WFWG311.HTM
--
Best Wishes,
Steve Winograd, MS-MVP (Windows Networking)

Please post any reply as a follow-up message in the news group
for everyone to see. I'm sorry, but I don't answer questions
addressed directly to me in E-mail or news groups.

Microsoft Most Valuable Professional - Windows Networking
http://mvp.support.microsoft.com

Steve Winograd's Networking FAQ
http://www.bcmaven.com/networking/faq.htm

----------------------------------------------------
Brilliant - loads to be geting on with - thanks Steve.

(I'd better tell the wife not to wait up tonight!) ;-)

Peter

Peter wrote:

3.11/XP/98 advice, please. I can't find an existing relevant topic.

I've connected my ageing Toshiba laptop (Win 3.11), using a 3-com Etherlink
III LAN PC card, to my Sony PCG-FX203 (either on-board Ethernet adaptor or
same 3-com card as the Toshiba) - it's on XP.

I've managed to get 3-com software compatible with the Toshiba and load it.
I'm now trying to set up a network connection, using a cross-wired Ethernet
cable.

Once it's up and running, I want to incorporate the 3.11 Toshiba into my
XP/98 existing network.

Question, please. Where do I go now with the 3.11 setup? I've got the
IPX/SPX NetBios protocol loaded in the XP network connection - is this the
correct one to use? I can't yet get the Sony to "see" the Toshiba, nor vice
versa. The green led on the 3-com interface module isn't on or flashing,
either.

As you can see, I'm still somewhat in the dark - I'd appreciate any help you
may be able to give.

If I'm on the wrong ng, can you point me in the right direction?



Peter:

Are you sure the WORKGROUP name assigned to the two machines are the
same?
Are IPX/SPX and NetBios installed on the WFWG machine?
Dos the NIC in the laptop pass the diagnostic tests (Probably DOS
Mode)from 3Com?



If you are using Windows for WORKGROUPS 3.11 it would make sense to use
the TCP/IP protocol. While this did not ship with WFWG it is available
as a free download from MS.

http://support.microsoft.com/default...;EN-US;Q99891&

ftp://ftp.microsoft.com/softlib/mslfiles/tcp32b.exe

Also need "Win32s"

ftp://ftp.microsoft.com/softlib/mslfiles/pw1118.exe


http://download.microsoft.com/downlo...-US/tcp32b.exe
or
ftp://ftp.microsoft.com/softlib/mslfiles/WFWTCP.EXE

Once you get TCP/IP running you can use PING to verify that the network
connection is working.

You could also try asking for help in these groups:


comp.os.ms-windows.setup.win3x

microsoft.public.win3x_wfw_dos

comp.os.ms-windows.apps.utilities.win3x

HTH & GL

John


--
\\\\\//
"Don't take life so seriously... | |
...it's only a temporary condition." (.) (.)
========================================oOO==(_)== OOo==
_____________________________________________
| John G. Dulak |
| Gnomeway Services |
/)| E-mail me from my home page at: |(\
/ )| http://users.telerama.com/~jdulak/email.htm |( \
( (|____________________________________________ |) )_
((( \ \ /_) ( \ / / )))
(\\\ \ \_/ / \ \_/ / ///)
\ / \ /
\ _/ \_ /
/ / \ \