If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Boot time warning: a labeled partition is not present. - So what?
On my WinME box, I originally installed the OS with a dedicated swap
partition (F on the main physical drive. A while later I moved the VM to a separate spindle, for sake of extra speed: - added a dedicated swap partition on the second physical drive - labeled it 'SWAP' - relabeled F: to 'SWAP2'. The previous, dedicated swap partition on the main drive (F: = SWAP2) remained unused, as WinME (unlike 2k / XP) can only handle one VM file. About a month ago I increased the RAM to a point where the VM is little used. I did not need some extra VM speed, so I - got rid of the second drive - relabeled the SWAP2 partition to SWAP - reverted the VM file location to F: . Now the VM file now happily lives there. All is fine, except Windows keeps complaining on startup: "Disk 'SWAP2' not present." and stops for a bunch of seconds to make sure I get the message. I thought it might be a message from a drive-relettering/renaming utility, but this is not the case. On this machine I never needed to reletter anything - I just changed a few partition labels. I am also pretty sure I never ever used any application or OS feature that referred to partitions by name, as opposed to by letter. QUESTIONS: 1 - Do I have to worry? [I don't think so.] 2 - If it's not too much trouble to do so, how do I convince Windows not to look for the SWAP2 partition?' Thank you in anticipation! |
#2
|
|||
|
|||
If you really did have your swapfile on a second HD, you are still
apparently pointing to it in your Environment settings - and if you've removed said HD, then it's no wonder that your system is complaining!! Set the VM manager to 'Allow Windows to manage....' and then forget about it for a few hours - then see what the actual settings are. -- Noel Paton (MS-MVP 2002-2005, Windows) Nil Carborundum Illegitemi http://www.btinternet.com/~winnoel/millsrpch.htm http://tinyurl.com/6oztj Please read http://dts-l.org/goodpost.htm on how to post messages to NG's "SpamHog" wrote in message ups.com... On my WinME box, I originally installed the OS with a dedicated swap partition (F on the main physical drive. A while later I moved the VM to a separate spindle, for sake of extra speed: - added a dedicated swap partition on the second physical drive - labeled it 'SWAP' - relabeled F: to 'SWAP2'. The previous, dedicated swap partition on the main drive (F: = SWAP2) remained unused, as WinME (unlike 2k / XP) can only handle one VM file. About a month ago I increased the RAM to a point where the VM is little used. I did not need some extra VM speed, so I - got rid of the second drive - relabeled the SWAP2 partition to SWAP - reverted the VM file location to F: . Now the VM file now happily lives there. All is fine, except Windows keeps complaining on startup: "Disk 'SWAP2' not present." and stops for a bunch of seconds to make sure I get the message. I thought it might be a message from a drive-relettering/renaming utility, but this is not the case. On this machine I never needed to reletter anything - I just changed a few partition labels. I am also pretty sure I never ever used any application or OS feature that referred to partitions by name, as opposed to by letter. QUESTIONS: 1 - Do I have to worry? [I don't think so.] 2 - If it's not too much trouble to do so, how do I convince Windows not to look for the SWAP2 partition?' Thank you in anticipation! |
#3
|
|||
|
|||
Thank you Noel!
First, a correction, for what it's worth: the warning is "Volume 'SWAP2' not present" Volume, not partition or drive or anything. I did as you suggested, moved the pagefile to C: and let Windows manage its size. The warning is still there afrer 4 reboots. As I had said, I had indeed selected F: as the swap drive and Windows had apparently toed the line. It must be something else. My record is not that precise... What if the SWAP2 partition had been already there at Windows install time? Where would Windows write itself a "drive map"? Also, I scanned the registry, and there is no reference to "SWAP2" anywhere. Ideas anyone? TIA from SpamHog / Filippo |
#4
|
|||
|
|||
It is probably not in the registry, but in the Environment Settings - look
in MSCONFIG to check. -- Noel Paton (MS-MVP 2002-2005, Windows) Nil Carborundum Illegitemi http://www.btinternet.com/~winnoel/millsrpch.htm http://tinyurl.com/6oztj Please read http://dts-l.org/goodpost.htm on how to post messages to NG's "SpamHog" wrote in message oups.com... Thank you Noel! First, a correction, for what it's worth: the warning is "Volume 'SWAP2' not present" Volume, not partition or drive or anything. I did as you suggested, moved the pagefile to C: and let Windows manage its size. The warning is still there afrer 4 reboots. As I had said, I had indeed selected F: as the swap drive and Windows had apparently toed the line. It must be something else. My record is not that precise... What if the SWAP2 partition had been already there at Windows install time? Where would Windows write itself a "drive map"? Also, I scanned the registry, and there is no reference to "SWAP2" anywhere. Ideas anyone? TIA from SpamHog / Filippo |
#5
|
|||
|
|||
The bloody paths! I had never looked there!
OK, thank you so much for incidentally teaching me (after 4 years of use and a lot of poor advice) how to properly set an environmental variable in WinME! You can't imagine the time I wasted fiddling elsewhere to get apps to find e.g. the GTK libraries! W.r.t. the missing partition: no, there's no reference to it there. All paths lead to places that exist and contain the corresponding files. The riddle is still on. |
#6
|
|||
|
|||
The riddle may still be on - but have you removed any references to
'networked drives' and suchlike?? -- Noel Paton (MS-MVP 2002-2005, Windows) Nil Carborundum Illegitemi http://www.btinternet.com/~winnoel/millsrpch.htm http://tinyurl.com/6oztj Please read http://dts-l.org/goodpost.htm on how to post messages to NG's "SpamHog" wrote in message oups.com... The bloody paths! I had never looked there! OK, thank you so much for incidentally teaching me (after 4 years of use and a lot of poor advice) how to properly set an environmental variable in WinME! You can't imagine the time I wasted fiddling elsewhere to get apps to find e.g. the GTK libraries! W.r.t. the missing partition: no, there's no reference to it there. All paths lead to places that exist and contain the corresponding files. The riddle is still on. |
#7
|
|||
|
|||
have you removed any references to 'networked drives' and suchlike??
Noel, Thank you for your persistence and probing questions! - On this (desktop) comp I never had any shared drive. The missing volume was for swap only - a good candidate for not sharing. - I manually mount and unmount the data partitions on my laptop. I know they are in the corresponding MRU list, but there's no SWAP2 there. Plus, I was told that for some arcane reason sharing the laptop's swap partition was no more conducive to satisfacton than with the desktop's. - Nothing in "Network Places". Does this answer your question? I can't think of anything else to check for such like. F |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Can't make up my mind . . | Ivan | General | 17 | March 31st 05 02:02 AM |
error message | bill | General | 7 | August 10th 04 02:09 AM |
XP on Fat32x advice ...? | RJK | General | 6 | August 5th 04 02:24 AM |
Replacing the boot drive, w/o reinstalling Windows and the apps? | Bill in Co. | General | 50 | August 1st 04 08:30 PM |
MBR switch on FDISK | jt3 | General | 30 | June 21st 04 08:56 PM |