If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Compaq Presario 4526 in win98se
I have this old presario 4526 and still working fine with w95 and I would
like to clean install it with w98se instead. I am concern with the drivers as hp is telling me that they do not support for w98. At the moment, the DM gives the following main info:- The display adatpers : S3 inc Trio 64V2 HD controller: Intel 82371 SB PCI Bus Master IDE Controller Modem : Compaq Presario 336-DFI 56K Upgradeable Sound : ES1887 Plug and Play I am concerned that I will not be able to get all the drivers for the w98se. Can some experienced it help to pin point the drivers that I can actually download when I make a clean installation of w98se. Hp had said they dont even have the data base for their 4526. Many thanks for your time. |
#2
|
|||
|
|||
"christina" wrote in message ...
I have this old presario 4526 and still working fine with w95 and I would like to clean install it with w98se instead. I am concern with the drivers as hp is telling me that they do not support for w98. At the moment, the DM gives the following main info:- The display adatpers : S3 inc Trio 64V2 HD controller: Intel 82371 SB PCI Bus Master IDE Controller Modem : Compaq Presario 336-DFI 56K Upgradeable Sound : ES1887 Plug and Play I am concerned that I will not be able to get all the drivers for the w98se. Does the system have enough processor power/memory/HD space to support 98? Don't worry about the HD controller, as 98 will install the correct driver for that during setup. There's a good chance that 98 will have useable sound and display adapter drivers as well, though installing the latest versions of those specific drivers would be best.. Finding and installing the correct modem driver will probably be the most necessary. Have you tried Google.com ? Here's one link I found plugging in the sound card information you gave. http://www.helpdrivers.com/aleman/li...&perif=sonidos Be awrae that most non-OEM driver download sites get their drivers from third party donors. Scan all downloads with up to date virus definitions. Ah,,you're in luck. Apparently that particular modem driver is included with 98 as well. http://support.microsoft.com/default...b;EN-US;190363 |
#3
|
|||
|
|||
I was about to reply to your post when I saw that Bill has replied with basically
the same info I was going to send on.....great minds and all that. ;-) IIRC, the S3 Trio display driver is included with Win98SE, and should be automatically detected. Likewise the HD Controller. Win98SE also includes drivers named ESS1887 AudioDrive and ESS1887 Plug and Play AudioDrive, one of which will hopefully be the driver you need for your sound, and should also be automatically detected if it is the correct driver. The modem driver is in the location Bill linked to, on the 98SE CD: drive:\drivers\modem\compaq where drive is the actual drive letter of your CD drive. For example, if your CD drive is drive D:, the path is: D:\drivers\modem\compaq From the Readme file in that folder tree, installation instructions: quote Compaq Computers Supported: Presario Series: 1000, 2000, 3000, 4000, 6000, and the Armada 1500 with the internal 33.6K or 56K modem. The modems in the above Compaq computers will not be automatically recognized by the Windows 98 installation routine. You must follow the steps below once the Windows 98 installation routine is complete in order to properly set up your Compaq modem: 1. Click Start, Settings, Control Panel, double click on the Add New Hardware icon 2. First screen says "This wizard searches for new drivers for:" Unknown Device Click Next. 3. Next screen: "What do you want Windows to do?" Select "Search for the best driver for your device (recommended)", Click Next 4. Next screen: "Windows will search for new drivers in its driver database in: * Floppy disk drives * CD-ROM drive * Specify a Location:" 5. Make sure "Specify a location" is the only box checked, enter "x:\drivers\modem\compaq" where "x" is the drive letter for the CD-ROM drive which contains the Windows 98 Installation CD-ROM. 6. Next screen: "Windows driver file search for the device:" followed by the name of your modem; click Next 7. Files are copied, Country Select dialog appears, then next Add New Hardware screen appears on top. Click Finish. 8. Select country, click Change Country, click Yes. 9. Final screen: "Are all your devices installed now?". Select Yes, click Next. You may encounter additional dialog boxes if your computer is equipped with Telephony (Speakerphone, Telephone Answering System, etc.) If you encounter this, follow the instructions on screen and be sure the location Windows is looking for files is "x:\drivers\modem\compaq" where "x" is the drive letter for the CD-ROM drive which contains the Windows 98 Installation CD-ROM. /quote Hope this is a help, in addition to what Bill has supplied. -- Glen Ventura, MS MVP Shell/User, A+ http://dts-l.org/goodpost.htm http://www.microsoft.com/communities...t/default.mspx "christina" wrote in message ... I have this old presario 4526 and still working fine with w95 and I would like to clean install it with w98se instead. I am concern with the drivers as hp is telling me that they do not support for w98. At the moment, the DM gives the following main info:- The display adatpers : S3 inc Trio 64V2 HD controller: Intel 82371 SB PCI Bus Master IDE Controller Modem : Compaq Presario 336-DFI 56K Upgradeable Sound : ES1887 Plug and Play I am concerned that I will not be able to get all the drivers for the w98se. Can some experienced it help to pin point the drivers that I can actually download when I make a clean installation of w98se. Hp had said they dont even have the data base for their 4526. Many thanks for your time. |
#4
|
|||
|
|||
"glee" wrote in message ...
.....great minds and all that. ;-) Suddenly my brain snapped... slowly.... step by step... |
#5
|
|||
|
|||
"Bill Blanton" wrote in message
... "glee" wrote in message ... .....great minds and all that. ;-) Suddenly my brain snapped... slowly.... step by step... inch by inch... :-o |
#6
|
|||
|
|||
Bill n Glee,
Many thanks and I will try to install w98se after I buy the OS disc. I will keep you posted. Hopefully it will work fine. "glee" wrote: I was about to reply to your post when I saw that Bill has replied with basically the same info I was going to send on.....great minds and all that. ;-) IIRC, the S3 Trio display driver is included with Win98SE, and should be automatically detected. Likewise the HD Controller. Win98SE also includes drivers named ESS1887 AudioDrive and ESS1887 Plug and Play AudioDrive, one of which will hopefully be the driver you need for your sound, and should also be automatically detected if it is the correct driver. The modem driver is in the location Bill linked to, on the 98SE CD: drive:\drivers\modem\compaq where drive is the actual drive letter of your CD drive. For example, if your CD drive is drive D:, the path is: D:\drivers\modem\compaq From the Readme file in that folder tree, installation instructions: quote Compaq Computers Supported: Presario Series: 1000, 2000, 3000, 4000, 6000, and the Armada 1500 with the internal 33.6K or 56K modem. The modems in the above Compaq computers will not be automatically recognized by the Windows 98 installation routine. You must follow the steps below once the Windows 98 installation routine is complete in order to properly set up your Compaq modem: 1. Click Start, Settings, Control Panel, double click on the Add New Hardware icon 2. First screen says "This wizard searches for new drivers for:" Unknown Device Click Next. 3. Next screen: "What do you want Windows to do?" Select "Search for the best driver for your device (recommended)", Click Next 4. Next screen: "Windows will search for new drivers in its driver database in: * Floppy disk drives * CD-ROM drive * Specify a Location:" 5. Make sure "Specify a location" is the only box checked, enter "x:\drivers\modem\compaq" where "x" is the drive letter for the CD-ROM drive which contains the Windows 98 Installation CD-ROM. 6. Next screen: "Windows driver file search for the device:" followed by the name of your modem; click Next 7. Files are copied, Country Select dialog appears, then next Add New Hardware screen appears on top. Click Finish. 8. Select country, click Change Country, click Yes. 9. Final screen: "Are all your devices installed now?". Select Yes, click Next. You may encounter additional dialog boxes if your computer is equipped with Telephony (Speakerphone, Telephone Answering System, etc.) If you encounter this, follow the instructions on screen and be sure the location Windows is looking for files is "x:\drivers\modem\compaq" where "x" is the drive letter for the CD-ROM drive which contains the Windows 98 Installation CD-ROM. /quote Hope this is a help, in addition to what Bill has supplied. -- Glen Ventura, MS MVP Shell/User, A+ http://dts-l.org/goodpost.htm http://www.microsoft.com/communities...t/default.mspx "christina" wrote in message ... I have this old presario 4526 and still working fine with w95 and I would like to clean install it with w98se instead. I am concern with the drivers as hp is telling me that they do not support for w98. At the moment, the DM gives the following main info:- The display adatpers : S3 inc Trio 64V2 HD controller: Intel 82371 SB PCI Bus Master IDE Controller Modem : Compaq Presario 336-DFI 56K Upgradeable Sound : ES1887 Plug and Play I am concerned that I will not be able to get all the drivers for the w98se. Can some experienced it help to pin point the drivers that I can actually download when I make a clean installation of w98se. Hp had said they dont even have the data base for their 4526. Many thanks for your time. |
#7
|
|||
|
|||
Suddenly my brain snapped...
slowly.... step by step... inch by inch... :-o one byte at a time ... ;-) |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Compaq presario win 98 boot problem | Karmawa | Disk Drives | 5 | January 29th 05 07:34 PM |
Adding Fonts to Win98se & Win95a | ForestSpirit | General | 1 | January 16th 05 10:40 PM |
Running WIN98SE with 4GB DDR and RAID | Paul Leon | General | 2 | October 5th 04 03:25 AM |
Compaq Presario PCs - Missing CD Drives or System Lock While Reading Media in CD-RW | Gerry | General | 0 | September 24th 04 06:01 PM |
Modem Driver for Compaq Presario 1660 | Jake | Setup & Installation | 0 | June 1st 04 10:31 PM |