A Windows 98 & ME forum. Win98banter

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » Win98banter forum » Windows 98 » Printing
Site Map Home Authors List Search Today's Posts Mark Forums Read Web Partners

Printing Blank Pages



 
 
Thread Tools Display Modes
  #1  
Old January 4th 08, 01:23 AM posted to microsoft.public.win98.printing
Moby
External Usenet User
 
Posts: 5
Default Printing Blank Pages

I am running a Lexmark Z45 printer with Windows 98SE and the printer has
started printing only blank pages. I have checked out all of Lexmarks
troubleshooting tips and also downloaded their updated driver - still no joy
! Windows does not seem to be communicating properly with the printer. Any
ideas out there?

Thanks

Moby
  #2  
Old January 4th 08, 04:14 AM posted to microsoft.public.win98.printing
Cari \(MS-MVP\)
External Usenet User
 
Posts: 19
Default Printing Blank Pages

First thing to check is that there is enough ink in both cartridges. Even
if you're only printing black text, the color ink tank also needs ink (of
all 3 colors in it) for the black to work.

Then uninstall and reinstall the printer. Another thing to try is a change
of cable, if it's possible to use USB, do so.
--
Cari (MS-MVP) Printing & Imaging
www.coribright.com/windows

"Moby" wrote in message
...
I am running a Lexmark Z45 printer with Windows 98SE and the printer has
started printing only blank pages. I have checked out all of Lexmarks
troubleshooting tips and also downloaded their updated driver - still no
joy
! Windows does not seem to be communicating properly with the printer. Any
ideas out there?

Thanks

Moby


  #3  
Old January 5th 08, 11:56 PM posted to microsoft.public.win98.printing
Moby
External Usenet User
 
Posts: 5
Default Printing Blank Pages

Thanks Cari. I have done the uninstall/reinstall and there is ink in both
cartridges. I also purchased a new USB cable.

I connected and installed a different printer (Canon) as a test, and tried
to print. The exact same thing happened. The printer made all the noises
like it was printing the document, but the page ejected blank - absolutely no
marks ! Is it possible there is some setting within Windows 98SE which needs
to be changed ?






"Cari (MS-MVP)" wrote:

First thing to check is that there is enough ink in both cartridges. Even
if you're only printing black text, the color ink tank also needs ink (of
all 3 colors in it) for the black to work.

Then uninstall and reinstall the printer. Another thing to try is a change
of cable, if it's possible to use USB, do so.
--
Cari (MS-MVP) Printing & Imaging
www.coribright.com/windows

"Moby" wrote in message
...
I am running a Lexmark Z45 printer with Windows 98SE and the printer has
started printing only blank pages. I have checked out all of Lexmarks
troubleshooting tips and also downloaded their updated driver - still no
joy
! Windows does not seem to be communicating properly with the printer. Any
ideas out there?

Thanks

Moby


  #4  
Old January 6th 08, 12:03 AM posted to microsoft.public.win98.printing
Moby
External Usenet User
 
Posts: 5
Default Printing Blank Pages

Thanks Cari. I have done the uninstall/reinstall and both cartridges have
ink. I also purchased a new USB cable.

I connected and installed a different printer (Canon), as a test and tried
to print. The exact same thing happened. The printer made all the noises as
if it was printing the document, but the page ejected blank with absolutely
no marks on it ! Is it possible that some setting within Windows 98SE needs
to be adjusted ?








"Cari (MS-MVP)" wrote:

First thing to check is that there is enough ink in both cartridges. Even
if you're only printing black text, the color ink tank also needs ink (of
all 3 colors in it) for the black to work.

Then uninstall and reinstall the printer. Another thing to try is a change
of cable, if it's possible to use USB, do so.
--
Cari (MS-MVP) Printing & Imaging
www.coribright.com/windows

"Moby" wrote in message
...
I am running a Lexmark Z45 printer with Windows 98SE and the printer has
started printing only blank pages. I have checked out all of Lexmarks
troubleshooting tips and also downloaded their updated driver - still no
joy
! Windows does not seem to be communicating properly with the printer. Any
ideas out there?

Thanks

Moby


  #5  
Old January 7th 08, 06:32 PM posted to microsoft.public.win98.printing
Tom Ferguson
External Usenet User
 
Posts: 2
Default Printing Blank Pages

What application are you using to print? Try creating and printing a
document in Notepad. The document need not be long. Just one printable
character would be enough, for example.

Let us know.

Tom
MSMVP 1998-2007

"Moby" wrote in message
...
I am running a Lexmark Z45 printer with Windows 98SE and the printer has
started printing only blank pages. I have checked out all of Lexmarks
troubleshooting tips and also downloaded their updated driver - still no
joy
! Windows does not seem to be communicating properly with the printer. Any
ideas out there?

Thanks

Moby


  #6  
Old January 15th 08, 12:11 AM posted to microsoft.public.win98.printing
[email protected]
External Usenet User
 
Posts: 3
Default Printing Blank Pages

On Jan 7, 9:32*am, "Tom Ferguson" wrote:
What application are you using to print? Try creating and printing a
document in Notepad. The document need not be long. Just one printable
character would be enough, for example.

Let us know.

Tom
MSMVP 1998-2007

"Moby" wrote in message

...


Thanks. I'm not familiar with "Notepad" and not sure that I have it -
in looking at "Add/Remove Programs", I don't see it there. I did,
however, create a document in Microsoft Word and tried to print. The
same thing happened - printer made all the usual noises as if
operating O.K. - but ejects the page with nothing on it!




I am running a Lexmark Z45 printer with Windows 98SE and the printer

has
started printing only blank pages. I have checked out all of Lexmarks
troubleshooting tips and also downloaded their updated driver - still no
joy
! Windows does not seem to be communicating properly with the printer. Any
ideas out there?


Thanks


Moby- Hide quoted text -


- Show quoted text -


  #7  
Old January 15th 08, 10:01 PM posted to microsoft.public.win98.printing
Tom Ferguson
External Usenet User
 
Posts: 2
Default Printing Blank Pages

I suggested Notepad to avoid the complexities introduced by printing from
complex word processors such as Word. Everyone has Notepad since it is
supplied with every version of Windows. Look in Start Programs Accessories.

Have a look in control Panel system Hardware Device Manager to see if
the USB port is marked with a red X or yellow !.

--

Tom
MSMVP 1998-2007

wrote in message
...
On Jan 7, 9:32 am, "Tom Ferguson" wrote:
What application are you using to print? Try creating and printing a
document in Notepad. The document need not be long. Just one printable
character would be enough, for example.

Let us know.

Tom
MSMVP 1998-2007

"Moby" wrote in message

...


Thanks. I'm not familiar with "Notepad" and not sure that I have it -
in looking at "Add/Remove Programs", I don't see it there. I did,
however, create a document in Microsoft Word and tried to print. The
same thing happened - printer made all the usual noises as if
operating O.K. - but ejects the page with nothing on it!




I am running a Lexmark Z45 printer with Windows 98SE and the printer

has
started printing only blank pages. I have checked out all of Lexmarks
troubleshooting tips and also downloaded their updated driver - still no
joy
! Windows does not seem to be communicating properly with the printer.
Any
ideas out there?


Thanks


Moby- Hide quoted text -


- Show quoted text -


  #8  
Old January 21st 08, 06:33 PM posted to microsoft.public.win98.printing
[email protected]
External Usenet User
 
Posts: 3
Default Printing Blank Pages

On Jan 15, 1:01*pm, "Tom Ferguson" wrote:
I suggested Notepad to avoid the complexities introduced by printing from
complex word processors such as Word. Everyone has Notepad since it is
supplied with every version of Windows. Look in Start Programs Accessories..

Have a look in control Panel * system * Hardware * Device Manager to see if
the USB port is marked with a red X or yellow !.

--

Tom
MSMVP 1998-2007

wrote in message

...
On Jan 7, 9:32 am, "Tom Ferguson" wrote: What application are you using to print? Try creating and printing a
document in Notepad. The document need not be long. Just one printable
character would be enough, for example.


Let us know.


Tom
MSMVP 1998-2007


"Moby" wrote in message


...


Thanks. I'm not familiar with "Notepad" and not sure that I have it -
in looking at "Add/Remove Programs", I don't see it there. I did,
however, create a document in Microsoft Word and tried to print. The
same thing happened - printer made all the usual noises as if
operating O.K. - but ejects the page with nothing on it!

*I am running a Lexmark Z45 printer with Windows 98SE and the printer
has



started printing only blank pages. I have checked out all of Lexmarks
troubleshooting tips and also downloaded their updated driver - still no
joy
! Windows does not seem to be communicating properly with the printer.
Any
ideas out there?


Thanks


Moby- Hide quoted text -


- Show quoted text -- Hide quoted text -


- Show quoted text -




Tom - Thanks for following up on the problem I was having. The printer
is now working O.K. again. I appreciate it.

Moby



  #9  
Old January 21st 08, 06:33 PM posted to microsoft.public.win98.printing
[email protected]
External Usenet User
 
Posts: 3
Default Printing Blank Pages

On Jan 15, 1:01*pm, "Tom Ferguson" wrote:
I suggested Notepad to avoid the complexities introduced by printing from
complex word processors such as Word. Everyone has Notepad since it is
supplied with every version of Windows. Look in Start Programs Accessories..

Have a look in control Panel * system * Hardware * Device Manager to see if
the USB port is marked with a red X or yellow !.

--

Tom
MSMVP 1998-2007

wrote in message

...
On Jan 7, 9:32 am, "Tom Ferguson" wrote: What application are you using to print? Try creating and printing a
document in Notepad. The document need not be long. Just one printable
character would be enough, for example.


Let us know.


Tom
MSMVP 1998-2007


"Moby" wrote in message


...


Thanks. I'm not familiar with "Notepad" and not sure that I have it -
in looking at "Add/Remove Programs", I don't see it there. I did,
however, create a document in Microsoft Word and tried to print. The
same thing happened - printer made all the usual noises as if
operating O.K. - but ejects the page with nothing on it!

*I am running a Lexmark Z45 printer with Windows 98SE and the printer
has



started printing only blank pages. I have checked out all of Lexmarks
troubleshooting tips and also downloaded their updated driver - still no
joy
! Windows does not seem to be communicating properly with the printer.
Any
ideas out there?


Thanks


Moby- Hide quoted text -


- Show quoted text -- Hide quoted text -


- Show quoted text -




Tom - Thanks for following up on the problem I was having. The printer
is now working O.K. again. I appreciate it.

Moby



 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
browser returns blank pages usautoschool Networking 0 October 1st 07 05:07 PM
IE six and printing web pages tweaks? PA Bear General 0 December 16th 05 02:33 AM
Printing 4 pages on 1 Oscar Printing 1 May 26th 05 04:42 PM
Blank pages in Win Help J.L. General 8 December 14th 04 11:37 PM
Getting blank pages Ian Internet 2 August 22nd 04 09:21 AM


All times are GMT +1. The time now is 08:23 PM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 Win98banter.
The comments are property of their posters.