If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Changing display to read 256
In the proces downloading windows updates the message
states that I should be running 256. please help? Thanks |
#2
|
|||
|
|||
Right-click a blank part of the desktop and select Properties then Settings.
Select an item from the Colours list that matches the setting required by whatever the procedure is that you are running. -- Jeff Richards MS MVP (Windows - Shell/User) wrote in message ... In the proces downloading windows updates the message states that I should be running 256. |
#3
|
|||
|
|||
Should 256 not be an available choice, you will probably need to install the
right display driver. My standard blurb on this issue: When the correct screen resolution (screen area) or the right number of colors are not available choices in display properties, settings tab, then it is a good bet you do not have the right driver installed for your display adapter. The display adapter in your PC is either a video card or a display chipset on the motherboard. If you received a CD or floppy disks with drivers along with your PC, see if they contain a display adapter driver and install it using: control panel, system, device manager, display adapter. If you know what display adapter your PC has but you have no disks, use www.google.com to track down the correct driver on the internet. If you do not know what display adapter your PC uses, you can go to a MS-DOS prompt and type: Debug and hit enter. The screen will display a flashing prompt next to a - sign. Type: DC000:35 (DC000:50 may also work) and hit enter. The name and possibly model of your display adapter should appear on the right hand side of the screen. To quit Debug, type Q and hit enter. If Debug is not helpful, you can try this program: Advanced PCI Info, available at: http://www.upsystems.com.ua/support/alexmina/ If all else fails, you will have to remove the computer case. Look at where the monitor plugs into the back of the case and then check that location inside the case. If there is a card there, you obviously have a video card and if not, you have on board graphics. Write down any information displayed on either the card or the chipset on the motherboard. Then use www.google.com to search for the information. Do not include all the data you found in one search message--search on each piece individually. If you include all the information at once, you might not get a hit. I have found that a video card will generally have to be removed in order to see the information. Be careful of static electricity as it can fry components. Before touching anything in the computer case (the cord is unplugged, right?), ground yourself to the case by touching it. Don't work on carpeting since shuffling your feet on it can generate static electricity after you grounded yourself. Remove the one screw that holds the card in place and using a rocking motion (left to right and back) and pull the card straight out. Once you have the right driver, install it through control panel, system, device manager or through control panel, add new hardware, as appropriate. -- Regards Ron Badour, MS MVP for W98 Tips: http://home.satx.rr.com/badour Knowledge Base Info: http://support.microsoft.com/default.aspx?pr=kbinfo wrote in message ... In the proces downloading windows updates the message states that I should be running 256. please help? Thanks |
#4
|
|||
|
|||
Thank you very much Ron! I am having the same type of problem.
Here is what I don't understand. I just plugged my monitor in and it worked when I got this system. Last week, I had to reformat the hard drive and reinstall 98. At that point I could no longer get more than 16 colors on the same monitor. Win 98 had the driver for the monitor in its driver database and still no luck. I tried to change the adapter to a super vga and still no luck even though I am about 99% sure my monitor is an SVGA monitor. So...I am going to try the advice you gave a couple of people on here. Wish me luck! I will need it... "Ron Badour" wrote: Should 256 not be an available choice, you will probably need to install the right display driver. My standard blurb on this issue: When the correct screen resolution (screen area) or the right number of colors are not available choices in display properties, settings tab, then it is a good bet you do not have the right driver installed for your display adapter. The display adapter in your PC is either a video card or a display chipset on the motherboard. If you received a CD or floppy disks with drivers along with your PC, see if they contain a display adapter driver and install it using: control panel, system, device manager, display adapter. If you know what display adapter your PC has but you have no disks, use www.google.com to track down the correct driver on the internet. If you do not know what display adapter your PC uses, you can go to a MS-DOS prompt and type: Debug and hit enter. The screen will display a flashing prompt next to a - sign. Type: DC000:35 (DC000:50 may also work) and hit enter. The name and possibly model of your display adapter should appear on the right hand side of the screen. To quit Debug, type Q and hit enter. If Debug is not helpful, you can try this program: Advanced PCI Info, available at: http://www.upsystems.com.ua/support/alexmina/ If all else fails, you will have to remove the computer case. Look at where the monitor plugs into the back of the case and then check that location inside the case. If there is a card there, you obviously have a video card and if not, you have on board graphics. Write down any information displayed on either the card or the chipset on the motherboard. Then use www.google.com to search for the information. Do not include all the data you found in one search message--search on each piece individually. If you include all the information at once, you might not get a hit. I have found that a video card will generally have to be removed in order to see the information. Be careful of static electricity as it can fry components. Before touching anything in the computer case (the cord is unplugged, right?), ground yourself to the case by touching it. Don't work on carpeting since shuffling your feet on it can generate static electricity after you grounded yourself. Remove the one screw that holds the card in place and using a rocking motion (left to right and back) and pull the card straight out. Once you have the right driver, install it through control panel, system, device manager or through control panel, add new hardware, as appropriate. -- Regards Ron Badour, MS MVP for W98 Tips: http://home.satx.rr.com/badour Knowledge Base Info: http://support.microsoft.com/default.aspx?pr=kbinfo wrote in message ... In the proces downloading windows updates the message states that I should be running 256. please help? Thanks |
#5
|
|||
|
|||
This will be very helpful to me too Ron...Thanks!
I have one other question. I have an ATI All in wonder video card, but a very old one. The CD only has drivers for win95. Is it possible to get drivers for win 98 or even XP for the old card? Thanks again! "Ron Badour" wrote: Should 256 not be an available choice, you will probably need to install the right display driver. My standard blurb on this issue: When the correct screen resolution (screen area) or the right number of colors are not available choices in display properties, settings tab, then it is a good bet you do not have the right driver installed for your display adapter. The display adapter in your PC is either a video card or a display chipset on the motherboard. If you received a CD or floppy disks with drivers along with your PC, see if they contain a display adapter driver and install it using: control panel, system, device manager, display adapter. If you know what display adapter your PC has but you have no disks, use www.google.com to track down the correct driver on the internet. If you do not know what display adapter your PC uses, you can go to a MS-DOS prompt and type: Debug and hit enter. The screen will display a flashing prompt next to a - sign. Type: DC000:35 (DC000:50 may also work) and hit enter. The name and possibly model of your display adapter should appear on the right hand side of the screen. To quit Debug, type Q and hit enter. If Debug is not helpful, you can try this program: Advanced PCI Info, available at: http://www.upsystems.com.ua/support/alexmina/ If all else fails, you will have to remove the computer case. Look at where the monitor plugs into the back of the case and then check that location inside the case. If there is a card there, you obviously have a video card and if not, you have on board graphics. Write down any information displayed on either the card or the chipset on the motherboard. Then use www.google.com to search for the information. Do not include all the data you found in one search message--search on each piece individually. If you include all the information at once, you might not get a hit. I have found that a video card will generally have to be removed in order to see the information. Be careful of static electricity as it can fry components. Before touching anything in the computer case (the cord is unplugged, right?), ground yourself to the case by touching it. Don't work on carpeting since shuffling your feet on it can generate static electricity after you grounded yourself. Remove the one screw that holds the card in place and using a rocking motion (left to right and back) and pull the card straight out. Once you have the right driver, install it through control panel, system, device manager or through control panel, add new hardware, as appropriate. -- Regards Ron Badour, MS MVP for W98 Tips: http://home.satx.rr.com/badour Knowledge Base Info: http://support.microsoft.com/default.aspx?pr=kbinfo wrote in message ... In the proces downloading windows updates the message states that I should be running 256. please help? Thanks |
#6
|
|||
|
|||
The monitor driver has nothing to do with the lack of display choices--you
need the correct video display adapter driver. Use that blurb I wrote to identify the particular video card and then use google.com to locate drivers. -- Regards Ron Badour, MS MVP for W98 Tips: http://home.satx.rr.com/badour Knowledge Base Info: http://support.microsoft.com/default.aspx?pr=kbinfo "Sheryl in Missouri (Misery)" Sheryl in Missouri wrote in message ... Thank you very much Ron! I am having the same type of problem. Here is what I don't understand. I just plugged my monitor in and it worked when I got this system. Last week, I had to reformat the hard drive and reinstall 98. At that point I could no longer get more than 16 colors on the same monitor. Win 98 had the driver for the monitor in its driver database and still no luck. I tried to change the adapter to a super vga and still no luck even though I am about 99% sure my monitor is an SVGA monitor. So...I am going to try the advice you gave a couple of people on here. Wish me luck! I will need it... "Ron Badour" wrote: Should 256 not be an available choice, you will probably need to install the right display driver. My standard blurb on this issue: When the correct screen resolution (screen area) or the right number of colors are not available choices in display properties, settings tab, then it is a good bet you do not have the right driver installed for your display adapter. The display adapter in your PC is either a video card or a display chipset on the motherboard. If you received a CD or floppy disks with drivers along with your PC, see if they contain a display adapter driver and install it using: control panel, system, device manager, display adapter. If you know what display adapter your PC has but you have no disks, use www.google.com to track down the correct driver on the internet. If you do not know what display adapter your PC uses, you can go to a MS-DOS prompt and type: Debug and hit enter. The screen will display a flashing prompt next to a - sign. Type: DC000:35 (DC000:50 may also work) and hit enter. The name and possibly model of your display adapter should appear on the right hand side of the screen. To quit Debug, type Q and hit enter. If Debug is not helpful, you can try this program: Advanced PCI Info, available at: http://www.upsystems.com.ua/support/alexmina/ If all else fails, you will have to remove the computer case. Look at where the monitor plugs into the back of the case and then check that location inside the case. If there is a card there, you obviously have a video card and if not, you have on board graphics. Write down any information displayed on either the card or the chipset on the motherboard. Then use www.google.com to search for the information. Do not include all the data you found in one search message--search on each piece individually. If you include all the information at once, you might not get a hit. I have found that a video card will generally have to be removed in order to see the information. Be careful of static electricity as it can fry components. Before touching anything in the computer case (the cord is unplugged, right?), ground yourself to the case by touching it. Don't work on carpeting since shuffling your feet on it can generate static electricity after you grounded yourself. Remove the one screw that holds the card in place and using a rocking motion (left to right and back) and pull the card straight out. Once you have the right driver, install it through control panel, system, device manager or through control panel, add new hardware, as appropriate. -- Regards Ron Badour, MS MVP for W98 Tips: http://home.satx.rr.com/badour Knowledge Base Info: http://support.microsoft.com/default.aspx?pr=kbinfo wrote in message ... In the proces downloading windows updates the message states that I should be running 256. please help? Thanks |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
problem changing display resolution | Monitors & Displays | 2 | December 24th 04 07:19 PM | |
changing color display from 16bit to 256 colors | david | General | 2 | August 10th 04 02:57 PM |
display reverted to vga and 16 colors for patriot computer | rosenmarsh | Monitors & Displays | 3 | July 4th 04 11:36 PM |
display freezing problem 4 DONT READ 3 I FIXED IT | Monitors & Displays | 1 | July 4th 04 10:57 PM | |
Changing a read only file to writable | Sam | General | 6 | June 20th 04 09:44 AM |