If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
3D Help
Ok turn on computer and I have three of every thing. it not the screen ck
it on another PC This is Micron PC. Can anyone tell me where to go to find out what is happening or give me some good advice..Thanks Rose |
#2
|
|||
|
|||
ok tried to change the screen resolution and now can not
seen anything but lines..Help Thannks Rose Ok turn on computer and I have three of every thing. it not the screen ck it on another PC This is Micron PC. Can anyone tell me where to go to find out what is happening or give me some good advice..Thanks Rose |
#3
|
|||
|
|||
Boot to safe mode. If the screen is working in safe mode, change the screen
area in display properties to 640x480 (it will already be there, but change it anyway) and reboot. Now check out what screen areas work and what don't. If the screen won't work in safe mode, try a different monitor. -- Jeff Richards MS MVP (Windows - Shell/User) "Dusty" wrote in message ... Ok turn on computer and I have three of every thing. it not the screen ck it on another PC This is Micron PC. Can anyone tell me where to go to find out what is happening or give me some good advice..Thanks Rose |
#4
|
|||
|
|||
Thanks that worked only problem now is the screen still has a black
line on the right side, ..Every thing shows on screen but there is this black line. I tried fixing the Monitor but that did not work, is there a way I can set the PC to work with This monitor. The old one would not work just power on..Are power plugs interchangeable? And where can I buy new ones Thanks for your help "Jeff Richards" wrote: Boot to safe mode. If the screen is working in safe mode, change the screen area in display properties to 640x480 (it will already be there, but change it anyway) and reboot. Now check out what screen areas work and what don't. If the screen won't work in safe mode, try a different monitor. -- Jeff Richards MS MVP (Windows - Shell/User) "Dusty" wrote in message ... Ok turn on computer and I have three of every thing. it not the screen ck it on another PC This is Micron PC. Can anyone tell me where to go to find out what is happening or give me some good advice..Thanks Rose |
#5
|
|||
|
|||
The black line down the right hand side suggests that the image is not
centred on the screen. You should use the monitor's front panel controls to make the image wider and centre it on the screen. Note that not all monitors have these controls accessible at the front panel. If you look in the Advanced tab of screen properties you may find a selection of refresh rates available. Selecting a different refresh rate will also change the position of the image on the monitor. Monitor power leads are usually interchangeable. You can purchase a new monitor at your local monitor supply store. -- Jeff Richards MS MVP (Windows - Shell/User) "Dusty" wrote in message ... Thanks that worked only problem now is the screen still has a black line on the right side, .Every thing shows on screen but there is this black line. I tried fixing the Monitor but that did not work, is there a way I can set the PC to work with This monitor. The old one would not work just power on..Are power plugs interchangeable? And where can I buy new ones Thanks for your help |
Thread Tools | |
Display Modes | |
|
|