A Windows 98 & ME forum. Win98banter

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » Win98banter forum » Windows 98 » General
Site Map Home Authors List Search Today's Posts Mark Forums Read Web Partners

"..connected USB device had malfunctioned.."



 
 
Thread Tools Display Modes
  #1  
Old October 26th 04, 11:23 PM
RJK
external usenet poster
 
Posts: n/a
Default "..connected USB device had malfunctioned.."

My brother, (who had a new MSI Kt6v mobo a few weeks ago), 'phoned to say
that he plugged his little Olympus C150 into a USB port - XP Pro detected
it - several little balloons popped out from his system tray in quick
succession, (i guess xp was detecting and setting up a "mass storage device"
and assigning a drive letter to it etc.), and the last balloon said that the
attached device had malfunctioned.

I think he's tried all the obvious things, fresh batteries in camera -
camera still works and takes photos etc.
....I suppose he could buy a card reader but they're not cheap.

I suspect it's the KT600 chipset not happy with USB signal from camera
(powered by 2 AA's) ...and he uses rechargeables - so 2 x 1.2volts instead
of what you'd get from alkaline disposables ....

His old PC Chips / Elite...I think it was .....didn't give trouble.

regards, RIchard


  #2  
Old October 26th 04, 11:48 PM
Clark Griswold
external usenet poster
 
Posts: n/a
Default

"RJK" wrote in message
...
My brother, (who had a new MSI Kt6v mobo a few weeks ago), 'phoned to say
that he plugged his little Olympus C150 into a USB port - XP Pro detected
it - several little balloons popped out from his system tray in quick
succession, (i guess xp was detecting and setting up a "mass storage
device" and assigning a drive letter to it etc.), and the last balloon
said that the attached device had malfunctioned.

I think he's tried all the obvious things, fresh batteries in camera -
camera still works and takes photos etc.
...I suppose he could buy a card reader but they're not cheap.

I suspect it's the KT600 chipset not happy with USB signal from camera
(powered by 2 AA's) ...and he uses rechargeables - so 2 x 1.2volts
instead of what you'd get from alkaline disposables ....

His old PC Chips / Elite...I think it was .....didn't give trouble.

regards, RIchard

Check cables, connectors, internal connections etc.
If you can't get the computer to read the camera maybe a read/write flash
card device is the way to go. I just bought one that fits in a 3.5 bay for
under $30 from Newegg. Make sure you get one that read xD cards.


  #3  
Old October 27th 04, 12:27 AM
RJK
external usenet poster
 
Posts: n/a
Default

Thanx Clark, I just checked my favourite online store, they've got a 13 way
reader, (external USB2.0), for 8.99, I thought they were all much more
expensive than that. Will try to pin it down on his PC first tho, when I
get around to it.

regards, Rchard


"Clark Griswold" wrote in message
...
"RJK" wrote in message
...
My brother, (who had a new MSI Kt6v mobo a few weeks ago), 'phoned to say
that he plugged his little Olympus C150 into a USB port - XP Pro detected
it - several little balloons popped out from his system tray in quick
succession, (i guess xp was detecting and setting up a "mass storage
device" and assigning a drive letter to it etc.), and the last balloon
said that the attached device had malfunctioned.

I think he's tried all the obvious things, fresh batteries in camera -
camera still works and takes photos etc.
...I suppose he could buy a card reader but they're not cheap.

I suspect it's the KT600 chipset not happy with USB signal from camera
(powered by 2 AA's) ...and he uses rechargeables - so 2 x 1.2volts
instead of what you'd get from alkaline disposables ....

His old PC Chips / Elite...I think it was .....didn't give trouble.

regards, RIchard

Check cables, connectors, internal connections etc.
If you can't get the computer to read the camera maybe a read/write flash
card device is the way to go. I just bought one that fits in a 3.5 bay for
under $30 from Newegg. Make sure you get one that read xD cards.



  #4  
Old October 27th 04, 02:11 AM
Quaoar
external usenet poster
 
Posts: n/a
Default


"RJK" wrote in message
...
Thanx Clark, I just checked my favourite online store, they've got a
13 way reader, (external USB2.0), for 8.99, I thought they were all
much more expensive than that. Will try to pin it down on his PC
first tho, when I get around to it.

regards, Rchard


"Clark Griswold" wrote in message
...
"RJK" wrote in message
...
My brother, (who had a new MSI Kt6v mobo a few weeks ago), 'phoned
to say that he plugged his little Olympus C150 into a USB port - XP
Pro detected it - several little balloons popped out from his system
tray in quick succession, (i guess xp was detecting and setting up a
"mass storage device" and assigning a drive letter to it etc.), and
the last balloon said that the attached device had malfunctioned.

I think he's tried all the obvious things, fresh batteries in
camera - camera still works and takes photos etc.
...I suppose he could buy a card reader but they're not cheap.

I suspect it's the KT600 chipset not happy with USB signal from
camera (powered by 2 AA's) ...and he uses rechargeables - so 2 x
1.2volts instead of what you'd get from alkaline disposables ....

His old PC Chips / Elite...I think it was .....didn't give trouble.

regards, RIchard

Check cables, connectors, internal connections etc.
If you can't get the computer to read the camera maybe a read/write
flash card device is the way to go. I just bought one that fits in a
3.5 bay for under $30 from Newegg. Make sure you get one that read xD
cards.




Some cameras have two settings for file transfer: point to point (PTP)
and normal (or something other than PTP) and if one mode fails, try the
other.

Q


 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Printer & Device Manager Roger Fink General 7 October 15th 04 12:42 PM
Cannot find Device File Patty Software & Applications 8 August 28th 04 02:52 AM
Please help! Display settings !! Mitzi Monitors & Displays 12 July 11th 04 05:19 AM
Error Code 28 and Error 2 Bill Thornton Hardware 1 June 27th 04 10:12 AM
How do I print to TCPIP connected printer from Win98? Al Dykes Networking 0 June 6th 04 04:13 PM


All times are GMT +1. The time now is 10:45 PM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 Win98banter.
The comments are property of their posters.