Error message & Microsoft Scan "exit" not responding

After I sent my computer to a PC clinic. I have the
following error message when I took my PC home.

"ScanDisk cannot read from the last cluster on driver C.
This cluster is either damaged or your system is not
configure properly.

Drive C may need to have Logical Block Addressing (LBA)
enabled to work properly,or its disk partition maybe
incorretly marked as a non-LBA partition. Data loss can
occur if your LBA setting or disk partition type for this
drive is misconfigured.

Check your computer's Bios setup utility or contact your
computer manufacturer or have your computer checked by a
qualified computer hardware technician.

If you are sure your drive is configured correctly, click
continue to have scandisk check drive C for errors."

PLEASE ADVICE HOW TO CORRECT THIS PROBLEM.

2. Second problem.When you not properly shut down the
following message appeared.
"Microsoft Scan
Because Windows was not properly shut down, one or more of
your disk drives may have errors on it.
To avoid see.................

(Blue screen)

[Exit]
__________________________________________________ ____

0% - 100%

Problems:
a. When Exit is highlighted and press enter, the system is
not responding.

b. The scanning percentage below the [Exit] is not shown.

Please advice how to correct this problem.

Many thanks.

"After I sent my computer to a PC clinic" well send it back and have them fix
it RIGHT

--
Adaware http://www.lavasoft.de
spybot http://security.kolla.de
AVG free antivirus http://www.grisoft.com
Panda online AntiVirus scan http://www.pandasoftware.com/ActiveScan/
Catalog of removal tools http://www.pandasoftware.com/download/utilities/
Blocking Unwanted Parasites with a Hosts file
http://mvps.org/winhelp2002/hosts.htm
links provided as a courtesy, read all instructions on the pages before use
Grateful thanks to the authors/webmasters

"Chew Francis" wrote in message
...
| After I sent my computer to a PC clinic. I have the
| following error message when I took my PC home.
|
| "ScanDisk cannot read from the last cluster on driver C.
| This cluster is either damaged or your system is not
| configure properly.
|
| Drive C may need to have Logical Block Addressing (LBA)
| enabled to work properly,or its disk partition maybe
| incorretly marked as a non-LBA partition. Data loss can
| occur if your LBA setting or disk partition type for this
| drive is misconfigured.
|
| Check your computer's Bios setup utility or contact your
| computer manufacturer or have your computer checked by a
| qualified computer hardware technician.
|
| If you are sure your drive is configured correctly, click
| continue to have scandisk check drive C for errors."
|
| PLEASE ADVICE HOW TO CORRECT THIS PROBLEM.
|
| 2. Second problem.When you not properly shut down the
| following message appeared.
| "Microsoft Scan
| Because Windows was not properly shut down, one or more of
| your disk drives may have errors on it.
| To avoid see.................
|
| (Blue screen)
|
| [Exit]
| __________________________________________________ ____
|
| 0% - 100%
|
| Problems:
| a. When Exit is highlighted and press enter, the system is
| not responding.
|
| b. The scanning percentage below the [Exit] is not shown.
|
| Please advice how to correct this problem.
|
| Many thanks.

"AlmostBob" wrote in message
...
"After I sent my computer to a PC clinic" well send it back and have them
fix
it RIGHT

--
Adaware http://www.lavasoft.de
spybot http://security.kolla.de
AVG free antivirus http://www.grisoft.com
Panda online AntiVirus scan http://www.pandasoftware.com/ActiveScan/
Catalog of removal tools http://www.pandasoftware.com/download/utilities/
Blocking Unwanted Parasites with a Hosts file
http://mvps.org/winhelp2002/hosts.htm
links provided as a courtesy, read all instructions on the pages before
use
Grateful thanks to the authors/webmasters

"Chew Francis" wrote in message
...
| After I sent my computer to a PC clinic. I have the
| following error message when I took my PC home.
|
| "ScanDisk cannot read from the last cluster on driver C.
| This cluster is either damaged or your system is not
| configure properly.
|
| Drive C may need to have Logical Block Addressing (LBA)
| enabled to work properly,or its disk partition maybe
| incorretly marked as a non-LBA partition. Data loss can
| occur if your LBA setting or disk partition type for this
| drive is misconfigured.
|
| Check your computer's Bios setup utility or contact your
| computer manufacturer or have your computer checked by a
| qualified computer hardware technician.
|
| If you are sure your drive is configured correctly, click
| continue to have scandisk check drive C for errors."
|
| PLEASE ADVICE HOW TO CORRECT THIS PROBLEM.
|
| 2. Second problem.When you not properly shut down the
| following message appeared.
| "Microsoft Scan
| Because Windows was not properly shut down, one or more of
| your disk drives may have errors on it.
| To avoid see.................
|
| (Blue screen)
|
| [Exit]
| __________________________________________________ ____
|
| 0% - 100%
|
| Problems:
| a. When Exit is highlighted and press enter, the system is
| not responding.
|
| b. The scanning percentage below the [Exit] is not shown.
|
| Please advice how to correct this problem.
|
| Many thanks.


***************
agree.........it should have come back in perfect, or at least running,
condition, shouldnt it ?
Why did you take it in in the first palce ?
EdK