A Windows 98 & ME forum. Win98banter

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » Win98banter forum » Windows 98 » Setup & Installation
Site Map Home Authors List Search Today's Posts Mark Forums Read Web Partners

windows fails to detect sound card



 
 
Thread Tools Display Modes
  #21  
Old September 29th 05, 06:39 AM
Damon
external usenet poster
 
Posts: n/a
Default

Alright, got into safe mode. However...

There is no "device manager" that you speak of, unless you are talking about
"add new hardware", which doesn't work in safe mode, or "add/remove
programs", which has nothing in it worth deleting. Sorry to hang up on
something so obvious, but I have no idea what you are talking about. I do
know what a device manager is but there just doesn't seem to be one on here.

"mdp" wrote:

During boot, just before the Windows splash screen displays, press the F8
key and you will get a menu of options (during boot you can tap the F8 key
to help 'get it' at the right time). Select Safe Mode which will then
resume booting. Then go into Device Manager and delete (maybe it's called
remove) everything under Sound. Reboot.


"Damon" wrote in message
...
F8? Safe Mode? What? I am given the option to "hit DELETE to enter setup"
during booting, but there is nothing in there that I recognize. I know
what
you are talking about, but only for our other computer at home. Please
elaborate?

"mdp" wrote:

Somethings wrong with my ISP. I read your response but can only reply to
this one.

Boot into Safe Mode (press F8 while booting, select Safe Mode). Go into
Device Manager and delete everything under Sound. Reboot. If the
computer
begins to ask for audio drivers - this would be a success. If you have
some, point it to the right folder otherwise cancel your way through and
you'll see the yellow exclamation marks under Device Manager. Your
computer
now sees audio HW and the next step is to find the right drivers.

If the computer still doesn't see HW, not sure what to do next.

"Damon" wrote in message
...
Motherboard: Biostar MGTLA, 11/11/97-i440LX-2A69JB09C-00
Chipsets: North Bridge / Intel 82443LX PAC, South Bridge / Intel
82371AB
PIIX4

Is that enough?

-Damon

"mdp" wrote:

Post back with the motherboard and chipset info (both under
Motherboard
using Everest).

"Damon" wrote in message
...
Hmmm, not sure if I checked up on the INF files. And I neglected to
post
my
system specs, which is usually the first thing I do. It is a
Quantex, a
company long out of business. GenuineIntel, Pentium(r) II Processor,
96
MB
RAM. 9FX Reality 334 graphics card (also very old and out of
business.)
I
gave up and cracked open my case; the sound card IS an ensoniq
es1370
card,
and since Everest was right about that I am assuming it was right
about
it
being a Creative Sound Blaster PCI 128.

That's all I can tell you, I'm not sure what these INF files are
that
you
speak of. I'm clearly only semi-computer literate. Please help, and
thanks.

-Damon

"mdp" wrote:

Did you install the latest INF file(s) for your chipset per the
previous
poster's suggestion (or rule it out)? This is often needed for
Win9x
on
older MBs to enable exactly what you're having problems with,
detecting
HW.
If you're not sure what this is, post back with the computer
make/model
or
motherboard make/model.

"Damon" wrote in message
...
I don't believe that Everest is wrong. I am quite sure I have the
sound
card
that it indicates. This computer is from early 1999-2000, it is
not
new.
We
upgraded the OS from Windows 95 to 98 a long time ago. I'm quite
sure
there
was no software included for the soundcard. Even if there was it
would
be
irrelevant because that is what the internet is for. I have
downloaded
many
drivers for my card off the internet. SBPCI_WebDrvsV5_12_01.exe.
SBPCI128Setup_w9x.exe. SPCTAUDIOSetupus.exe. All of them either
crashed
or
asked for missing files. I downloaded all the missing files off
the
internet
from www.soundcard-drivers.com. Still no change. And what the
hell
is a
56k
Speakerphone?

"Franc Zabkar" wrote:

On Thu, 22 Sep 2005 22:21:01 -0700, "Damon"
put finger to keyboard and
composed:

When I try to add the sound card driver through Add New
Hardware,
I
get
this:

"The file 'a3d.dll' on Creative Sound Blaster PCI 128 Driver
Disk
cannot
be
found."

I don't *have* a driver disk. Why would I? This stuff came with
the
computer, and never asked for one before. Nice products,
Microsoft.

You *should* have received a set of discs with your new
computer.
These discs would have device drivers and user manuals. At the
very
least you should have been given a CD for your motherboard.

Why don't you visually identify your soundcard? Everest may not
be
identifying it correctly, especially if it one of those odd
sound/modem combo cards.

"Damon" wrote:

I've already done this. The driver I downloaded wouldn't
install
because it
couldn't find the soundcard on my computer. The computer
can't
even
find the
damn card! It's (apparently) a Soundblaster PCI128. I've
tried
at
least 30
different drivers in the Device Manager trying to find one
that
works,
and
none have. The driver I downloaded doesn't even show up under
the
Creative
menu, either. My speakers are making wierd crackling noises.

Fed up. I'm this close to buying a new computer, but I am a
college
student
and have limited funds so I hope it doesn't come to that.
Thanks
to
all of
you for your help, though. Really appreciated.

"charlie R" wrote:

Check out this link,

http://www.ehow.com/how_5571_upgrade-drivers-sound.html


"Damon" wrote in message
...
I downloaded Everest, which informed me that I have a
Creative
Sound
Blaster
PCI128 (Ensoniq ES1370) sound card. (This is the card
that
came
with
the
computer. It always used to work before.) The Everest
program
led
me
to the
Creative website, where I downloaded the driver and was
told
that
it
couldn't
install because it could not detect a Sound Blaster card
on
my
computer.

"Franc Zabkar" wrote:

On Tue, 20 Sep 2005 21:55:03 -0700, "Damon"
put finger to
keyboard
and
composed:

I don't want to have to crack the case open
and look directly; isn't there a way to get Windows to
find
the
sound card so
I know what driver to download?

Many people recommend Everest Home Edition:

http://www.lavalys.hu/products/overv...?pid=1&lang=en

Otherwise Windows 98 has msinfo32.exe which will tell
you
something
about your "problem" devices.

-- Franc Zabkar

Please remove one 'i' from my address when replying by
email.




-- Franc Zabkar

Please remove one 'i' from my address when replying by email.















  #22  
Old September 30th 05, 02:18 AM
mdp
external usenet poster
 
Posts: n/a
Default

Right click on My Computer. Select Properties.

"Damon" wrote in message
...
Alright, got into safe mode. However...

There is no "device manager" that you speak of, unless you are talking
about
"add new hardware", which doesn't work in safe mode, or "add/remove
programs", which has nothing in it worth deleting. Sorry to hang up on
something so obvious, but I have no idea what you are talking about. I do
know what a device manager is but there just doesn't seem to be one on
here.

"mdp" wrote:

During boot, just before the Windows splash screen displays, press the F8
key and you will get a menu of options (during boot you can tap the F8
key
to help 'get it' at the right time). Select Safe Mode which will then
resume booting. Then go into Device Manager and delete (maybe it's
called
remove) everything under Sound. Reboot.


"Damon" wrote in message
...
F8? Safe Mode? What? I am given the option to "hit DELETE to enter
setup"
during booting, but there is nothing in there that I recognize. I know
what
you are talking about, but only for our other computer at home. Please
elaborate?

"mdp" wrote:

Somethings wrong with my ISP. I read your response but can only reply
to
this one.

Boot into Safe Mode (press F8 while booting, select Safe Mode). Go
into
Device Manager and delete everything under Sound. Reboot. If the
computer
begins to ask for audio drivers - this would be a success. If you
have
some, point it to the right folder otherwise cancel your way through
and
you'll see the yellow exclamation marks under Device Manager. Your
computer
now sees audio HW and the next step is to find the right drivers.

If the computer still doesn't see HW, not sure what to do next.

"Damon" wrote in message
...
Motherboard: Biostar MGTLA, 11/11/97-i440LX-2A69JB09C-00
Chipsets: North Bridge / Intel 82443LX PAC, South Bridge / Intel
82371AB
PIIX4

Is that enough?

-Damon

"mdp" wrote:

Post back with the motherboard and chipset info (both under
Motherboard
using Everest).

"Damon" wrote in message
...
Hmmm, not sure if I checked up on the INF files. And I neglected
to
post
my
system specs, which is usually the first thing I do. It is a
Quantex, a
company long out of business. GenuineIntel, Pentium(r) II
Processor,
96
MB
RAM. 9FX Reality 334 graphics card (also very old and out of
business.)
I
gave up and cracked open my case; the sound card IS an ensoniq
es1370
card,
and since Everest was right about that I am assuming it was right
about
it
being a Creative Sound Blaster PCI 128.

That's all I can tell you, I'm not sure what these INF files are
that
you
speak of. I'm clearly only semi-computer literate. Please help,
and
thanks.

-Damon

"mdp" wrote:

Did you install the latest INF file(s) for your chipset per the
previous
poster's suggestion (or rule it out)? This is often needed for
Win9x
on
older MBs to enable exactly what you're having problems with,
detecting
HW.
If you're not sure what this is, post back with the computer
make/model
or
motherboard make/model.

"Damon" wrote in message
...
I don't believe that Everest is wrong. I am quite sure I have
the
sound
card
that it indicates. This computer is from early 1999-2000, it
is
not
new.
We
upgraded the OS from Windows 95 to 98 a long time ago. I'm
quite
sure
there
was no software included for the soundcard. Even if there was
it
would
be
irrelevant because that is what the internet is for. I have
downloaded
many
drivers for my card off the internet.
SBPCI_WebDrvsV5_12_01.exe.
SBPCI128Setup_w9x.exe. SPCTAUDIOSetupus.exe. All of them
either
crashed
or
asked for missing files. I downloaded all the missing files
off
the
internet
from www.soundcard-drivers.com. Still no change. And what the
hell
is a
56k
Speakerphone?

"Franc Zabkar" wrote:

On Thu, 22 Sep 2005 22:21:01 -0700, "Damon"
put finger to keyboard and
composed:

When I try to add the sound card driver through Add New
Hardware,
I
get
this:

"The file 'a3d.dll' on Creative Sound Blaster PCI 128 Driver
Disk
cannot
be
found."

I don't *have* a driver disk. Why would I? This stuff came
with
the
computer, and never asked for one before. Nice products,
Microsoft.

You *should* have received a set of discs with your new
computer.
These discs would have device drivers and user manuals. At
the
very
least you should have been given a CD for your motherboard.

Why don't you visually identify your soundcard? Everest may
not
be
identifying it correctly, especially if it one of those odd
sound/modem combo cards.

"Damon" wrote:

I've already done this. The driver I downloaded wouldn't
install
because it
couldn't find the soundcard on my computer. The computer
can't
even
find the
damn card! It's (apparently) a Soundblaster PCI128. I've
tried
at
least 30
different drivers in the Device Manager trying to find one
that
works,
and
none have. The driver I downloaded doesn't even show up
under
the
Creative
menu, either. My speakers are making wierd crackling
noises.

Fed up. I'm this close to buying a new computer, but I am
a
college
student
and have limited funds so I hope it doesn't come to that.
Thanks
to
all of
you for your help, though. Really appreciated.

"charlie R" wrote:

Check out this link,

http://www.ehow.com/how_5571_upgrade-drivers-sound.html


"Damon" wrote in
message
...
I downloaded Everest, which informed me that I have a
Creative
Sound
Blaster
PCI128 (Ensoniq ES1370) sound card. (This is the card
that
came
with
the
computer. It always used to work before.) The Everest
program
led
me
to the
Creative website, where I downloaded the driver and
was
told
that
it
couldn't
install because it could not detect a Sound Blaster
card
on
my
computer.

"Franc Zabkar" wrote:

On Tue, 20 Sep 2005 21:55:03 -0700, "Damon"
put finger to
keyboard
and
composed:

I don't want to have to crack the case open
and look directly; isn't there a way to get Windows
to
find
the
sound card so
I know what driver to download?

Many people recommend Everest Home Edition:

http://www.lavalys.hu/products/overv...?pid=1&lang=en

Otherwise Windows 98 has msinfo32.exe which will
tell
you
something
about your "problem" devices.

-- Franc Zabkar

Please remove one 'i' from my address when replying
by
email.




-- Franc Zabkar

Please remove one 'i' from my address when replying by email.

















  #23  
Old September 30th 05, 04:03 AM
Damon
external usenet poster
 
Posts: n/a
Default

Okay, booting in save mode, went into Device Manager, deleted all the
bogus/phantom Audio entries and rebooted in normal. Windows detected new
Audio PCI hardware and attempted to install it. However, when it asks for the
driver, I am stumped. I don't have a driver CD and only one of the drivers
I've installed has created a folder. I pointed the install program to that
folder but it couldn't find what it was looking for. Perhaps I have the wrong
driver? I don't see how I could. Specifically "a3d.dll" or something... not
sure what that is. So I cancelled and went to reinstall one of the drivers,
and as it was installing, the Windows audio PCI detection window came up
again and prompted me to point it to the right driver. Again, I had nothing
to point it to. I finished installing the driver and it appeared to have no
difference at all.

If you know of the specific driver and the specific way I am suppose to
install it, that would be helpful.

I'm so close, I can feel it...

Thanks,

Damon

"mdp" wrote:

Right click on My Computer. Select Properties.

"Damon" wrote in message
...
Alright, got into safe mode. However...

There is no "device manager" that you speak of, unless you are talking
about
"add new hardware", which doesn't work in safe mode, or "add/remove
programs", which has nothing in it worth deleting. Sorry to hang up on
something so obvious, but I have no idea what you are talking about. I do
know what a device manager is but there just doesn't seem to be one on
here.

"mdp" wrote:

During boot, just before the Windows splash screen displays, press the F8
key and you will get a menu of options (during boot you can tap the F8
key
to help 'get it' at the right time). Select Safe Mode which will then
resume booting. Then go into Device Manager and delete (maybe it's
called
remove) everything under Sound. Reboot.


"Damon" wrote in message
...
F8? Safe Mode? What? I am given the option to "hit DELETE to enter
setup"
during booting, but there is nothing in there that I recognize. I know
what
you are talking about, but only for our other computer at home. Please
elaborate?

"mdp" wrote:

Somethings wrong with my ISP. I read your response but can only reply
to
this one.

Boot into Safe Mode (press F8 while booting, select Safe Mode). Go
into
Device Manager and delete everything under Sound. Reboot. If the
computer
begins to ask for audio drivers - this would be a success. If you
have
some, point it to the right folder otherwise cancel your way through
and
you'll see the yellow exclamation marks under Device Manager. Your
computer
now sees audio HW and the next step is to find the right drivers.

If the computer still doesn't see HW, not sure what to do next.

"Damon" wrote in message
...
Motherboard: Biostar MGTLA, 11/11/97-i440LX-2A69JB09C-00
Chipsets: North Bridge / Intel 82443LX PAC, South Bridge / Intel
82371AB
PIIX4

Is that enough?

-Damon

"mdp" wrote:

Post back with the motherboard and chipset info (both under
Motherboard
using Everest).

"Damon" wrote in message
...
Hmmm, not sure if I checked up on the INF files. And I neglected
to
post
my
system specs, which is usually the first thing I do. It is a
Quantex, a
company long out of business. GenuineIntel, Pentium(r) II
Processor,
96
MB
RAM. 9FX Reality 334 graphics card (also very old and out of
business.)
I
gave up and cracked open my case; the sound card IS an ensoniq
es1370
card,
and since Everest was right about that I am assuming it was right
about
it
being a Creative Sound Blaster PCI 128.

That's all I can tell you, I'm not sure what these INF files are
that
you
speak of. I'm clearly only semi-computer literate. Please help,
and
thanks.

-Damon

"mdp" wrote:

Did you install the latest INF file(s) for your chipset per the
previous
poster's suggestion (or rule it out)? This is often needed for
Win9x
on
older MBs to enable exactly what you're having problems with,
detecting
HW.
If you're not sure what this is, post back with the computer
make/model
or
motherboard make/model.

"Damon" wrote in message
...
I don't believe that Everest is wrong. I am quite sure I have
the
sound
card
that it indicates. This computer is from early 1999-2000, it
is
not
new.
We
upgraded the OS from Windows 95 to 98 a long time ago. I'm
quite
sure
there
was no software included for the soundcard. Even if there was
it
would
be
irrelevant because that is what the internet is for. I have
downloaded
many
drivers for my card off the internet.
SBPCI_WebDrvsV5_12_01.exe.
SBPCI128Setup_w9x.exe. SPCTAUDIOSetupus.exe. All of them
either
crashed
or
asked for missing files. I downloaded all the missing files
off
the
internet
from www.soundcard-drivers.com. Still no change. And what the
hell
is a
56k
Speakerphone?

"Franc Zabkar" wrote:

On Thu, 22 Sep 2005 22:21:01 -0700, "Damon"
put finger to keyboard and
composed:

When I try to add the sound card driver through Add New
Hardware,
I
get
this:

"The file 'a3d.dll' on Creative Sound Blaster PCI 128 Driver
Disk
cannot
be
found."

I don't *have* a driver disk. Why would I? This stuff came
with
the
computer, and never asked for one before. Nice products,
Microsoft.

You *should* have received a set of discs with your new
computer.
These discs would have device drivers and user manuals. At
the
very
least you should have been given a CD for your motherboard.

Why don't you visually identify your soundcard? Everest may
not
be
identifying it correctly, especially if it one of those odd
sound/modem combo cards.

"Damon" wrote:

I've already done this. The driver I downloaded wouldn't
install
because it
couldn't find the soundcard on my computer. The computer
can't
even
find the
damn card! It's (apparently) a Soundblaster PCI128. I've
tried
at
least 30
different drivers in the Device Manager trying to find one
that
works,
and
none have. The driver I downloaded doesn't even show up
under
the
Creative
menu, either. My speakers are making wierd crackling
noises.

Fed up. I'm this close to buying a new computer, but I am
a
college
student
and have limited funds so I hope it doesn't come to that.
Thanks
to
all of
you for your help, though. Really appreciated.

"charlie R" wrote:

Check out this link,

http://www.ehow.com/how_5571_upgrade-drivers-sound.html


"Damon" wrote in
message
...
I downloaded Everest, which informed me that I have a
Creative
Sound
Blaster
PCI128 (Ensoniq ES1370) sound card. (This is the card
that
came
with
the
computer. It always used to work before.) The Everest
program
led
me
to the
Creative website, where I downloaded the driver and
was
told
that
it
couldn't
install because it could not detect a Sound Blaster
card
on
my
computer.

"Franc Zabkar" wrote:

On Tue, 20 Sep 2005 21:55:03 -0700, "Damon"
put finger to
keyboard
and
composed:

I don't want to have to crack the case open
and look directly; isn't there a way to get Windows
to
find
the
sound card so
I know what driver to download?

Many people recommend Everest Home Edition:

http://www.lavalys.hu/products/overv...?pid=1&lang=en

Otherwise Windows 98 has msinfo32.exe which will
tell
you
something
about your "problem" devices.

-- Franc Zabkar

Please remove one 'i' from my address when replying
by
email.




-- Franc Zabkar

  #24  
Old September 30th 05, 05:24 AM
mdp
external usenet poster
 
Posts: n/a
Default

It is now detecting HW - problem one solved. You are close. All you need
now are the right drivers. I'll see what I can find. In the meantime,
Google is your friend.

"Damon" wrote in message
...
Okay, booting in save mode, went into Device Manager, deleted all the
bogus/phantom Audio entries and rebooted in normal. Windows detected new
Audio PCI hardware and attempted to install it. However, when it asks for
the
driver, I am stumped. I don't have a driver CD and only one of the drivers
I've installed has created a folder. I pointed the install program to that
folder but it couldn't find what it was looking for. Perhaps I have the
wrong
driver? I don't see how I could. Specifically "a3d.dll" or something...
not
sure what that is. So I cancelled and went to reinstall one of the
drivers,
and as it was installing, the Windows audio PCI detection window came up
again and prompted me to point it to the right driver. Again, I had
nothing
to point it to. I finished installing the driver and it appeared to have
no
difference at all.

If you know of the specific driver and the specific way I am suppose to
install it, that would be helpful.

I'm so close, I can feel it...

Thanks,

Damon

"mdp" wrote:

Right click on My Computer. Select Properties.

"Damon" wrote in message
...
Alright, got into safe mode. However...

There is no "device manager" that you speak of, unless you are talking
about
"add new hardware", which doesn't work in safe mode, or "add/remove
programs", which has nothing in it worth deleting. Sorry to hang up on
something so obvious, but I have no idea what you are talking about. I
do
know what a device manager is but there just doesn't seem to be one on
here.

"mdp" wrote:

During boot, just before the Windows splash screen displays, press the
F8
key and you will get a menu of options (during boot you can tap the F8
key
to help 'get it' at the right time). Select Safe Mode which will then
resume booting. Then go into Device Manager and delete (maybe it's
called
remove) everything under Sound. Reboot.


"Damon" wrote in message
...
F8? Safe Mode? What? I am given the option to "hit DELETE to enter
setup"
during booting, but there is nothing in there that I recognize. I
know
what
you are talking about, but only for our other computer at home.
Please
elaborate?

"mdp" wrote:

Somethings wrong with my ISP. I read your response but can only
reply
to
this one.

Boot into Safe Mode (press F8 while booting, select Safe Mode). Go
into
Device Manager and delete everything under Sound. Reboot. If the
computer
begins to ask for audio drivers - this would be a success. If you
have
some, point it to the right folder otherwise cancel your way
through
and
you'll see the yellow exclamation marks under Device Manager. Your
computer
now sees audio HW and the next step is to find the right drivers.

If the computer still doesn't see HW, not sure what to do next.

"Damon" wrote in message
...
Motherboard: Biostar MGTLA, 11/11/97-i440LX-2A69JB09C-00
Chipsets: North Bridge / Intel 82443LX PAC, South Bridge / Intel
82371AB
PIIX4

Is that enough?

-Damon

"mdp" wrote:

Post back with the motherboard and chipset info (both under
Motherboard
using Everest).

"Damon" wrote in message
...
Hmmm, not sure if I checked up on the INF files. And I
neglected
to
post
my
system specs, which is usually the first thing I do. It is a
Quantex, a
company long out of business. GenuineIntel, Pentium(r) II
Processor,
96
MB
RAM. 9FX Reality 334 graphics card (also very old and out of
business.)
I
gave up and cracked open my case; the sound card IS an ensoniq
es1370
card,
and since Everest was right about that I am assuming it was
right
about
it
being a Creative Sound Blaster PCI 128.

That's all I can tell you, I'm not sure what these INF files
are
that
you
speak of. I'm clearly only semi-computer literate. Please
help,
and
thanks.

-Damon

"mdp" wrote:

Did you install the latest INF file(s) for your chipset per
the
previous
poster's suggestion (or rule it out)? This is often needed
for
Win9x
on
older MBs to enable exactly what you're having problems with,
detecting
HW.
If you're not sure what this is, post back with the computer
make/model
or
motherboard make/model.

"Damon" wrote in message
...
I don't believe that Everest is wrong. I am quite sure I
have
the
sound
card
that it indicates. This computer is from early 1999-2000,
it
is
not
new.
We
upgraded the OS from Windows 95 to 98 a long time ago. I'm
quite
sure
there
was no software included for the soundcard. Even if there
was
it
would
be
irrelevant because that is what the internet is for. I have
downloaded
many
drivers for my card off the internet.
SBPCI_WebDrvsV5_12_01.exe.
SBPCI128Setup_w9x.exe. SPCTAUDIOSetupus.exe. All of them
either
crashed
or
asked for missing files. I downloaded all the missing files
off
the
internet
from www.soundcard-drivers.com. Still no change. And what
the
hell
is a
56k
Speakerphone?

"Franc Zabkar" wrote:

On Thu, 22 Sep 2005 22:21:01 -0700, "Damon"
put finger to keyboard
and
composed:

When I try to add the sound card driver through Add New
Hardware,
I
get
this:

"The file 'a3d.dll' on Creative Sound Blaster PCI 128
Driver
Disk
cannot
be
found."

I don't *have* a driver disk. Why would I? This stuff
came
with
the
computer, and never asked for one before. Nice products,
Microsoft.

You *should* have received a set of discs with your new
computer.
These discs would have device drivers and user manuals. At
the
very
least you should have been given a CD for your
motherboard.

Why don't you visually identify your soundcard? Everest
may
not
be
identifying it correctly, especially if it one of those
odd
sound/modem combo cards.

"Damon" wrote:

I've already done this. The driver I downloaded
wouldn't
install
because it
couldn't find the soundcard on my computer. The
computer
can't
even
find the
damn card! It's (apparently) a Soundblaster PCI128.
I've
tried
at
least 30
different drivers in the Device Manager trying to find
one
that
works,
and
none have. The driver I downloaded doesn't even show up
under
the
Creative
menu, either. My speakers are making wierd crackling
noises.

Fed up. I'm this close to buying a new computer, but I
am
a
college
student
and have limited funds so I hope it doesn't come to
that.
Thanks
to
all of
you for your help, though. Really appreciated.

"charlie R" wrote:

Check out this link,

http://www.ehow.com/how_5571_upgrade-drivers-sound.html


"Damon" wrote in
message
...
I downloaded Everest, which informed me that I have
a
Creative
Sound
Blaster
PCI128 (Ensoniq ES1370) sound card. (This is the
card
that
came
with
the
computer. It always used to work before.) The
Everest
program
led
me
to the
Creative website, where I downloaded the driver and
was
told
that
it
couldn't
install because it could not detect a Sound Blaster
card
on
my
computer.

"Franc Zabkar" wrote:

On Tue, 20 Sep 2005 21:55:03 -0700, "Damon"
put finger to
keyboard
and
composed:

I don't want to have to crack the case open
and look directly; isn't there a way to get
Windows
to
find
the
sound card so
I know what driver to download?

Many people recommend Everest Home Edition:

http://www.lavalys.hu/products/overv...?pid=1&lang=en

Otherwise Windows 98 has msinfo32.exe which will
tell
you
something
about your "problem" devices.

-- Franc Zabkar

Please remove one 'i' from my address when
replying
by
email.




-- Franc Zabkar



  #25  
Old September 30th 05, 05:47 AM
mdp
external usenet poster
 
Posts: n/a
Default

Found this. Follow the directions to right click and save. Unzip into its
own folder. Open, double-click on the file setup.exe. Cross your fingers.

http://www.files.lt/download.php?Lan...ck=1&RI d=308


"mdp" wrote in message
...
It is now detecting HW - problem one solved. You are close. All you need
now are the right drivers. I'll see what I can find. In the meantime,
Google is your friend.

"Damon" wrote in message
...
Okay, booting in save mode, went into Device Manager, deleted all the
bogus/phantom Audio entries and rebooted in normal. Windows detected new
Audio PCI hardware and attempted to install it. However, when it asks for
the
driver, I am stumped. I don't have a driver CD and only one of the
drivers
I've installed has created a folder. I pointed the install program to
that
folder but it couldn't find what it was looking for. Perhaps I have the
wrong
driver? I don't see how I could. Specifically "a3d.dll" or something...
not
sure what that is. So I cancelled and went to reinstall one of the
drivers,
and as it was installing, the Windows audio PCI detection window came up
again and prompted me to point it to the right driver. Again, I had
nothing
to point it to. I finished installing the driver and it appeared to have
no
difference at all.

If you know of the specific driver and the specific way I am suppose to
install it, that would be helpful.

I'm so close, I can feel it...

Thanks,

Damon

"mdp" wrote:

Right click on My Computer. Select Properties.

"Damon" wrote in message
...
Alright, got into safe mode. However...

There is no "device manager" that you speak of, unless you are talking
about
"add new hardware", which doesn't work in safe mode, or "add/remove
programs", which has nothing in it worth deleting. Sorry to hang up on
something so obvious, but I have no idea what you are talking about. I
do
know what a device manager is but there just doesn't seem to be one on
here.

"mdp" wrote:

During boot, just before the Windows splash screen displays, press
the F8
key and you will get a menu of options (during boot you can tap the
F8
key
to help 'get it' at the right time). Select Safe Mode which will
then
resume booting. Then go into Device Manager and delete (maybe it's
called
remove) everything under Sound. Reboot.


"Damon" wrote in message
...
F8? Safe Mode? What? I am given the option to "hit DELETE to enter
setup"
during booting, but there is nothing in there that I recognize. I
know
what
you are talking about, but only for our other computer at home.
Please
elaborate?

"mdp" wrote:

Somethings wrong with my ISP. I read your response but can only
reply
to
this one.

Boot into Safe Mode (press F8 while booting, select Safe Mode).
Go
into
Device Manager and delete everything under Sound. Reboot. If the
computer
begins to ask for audio drivers - this would be a success. If you
have
some, point it to the right folder otherwise cancel your way
through
and
you'll see the yellow exclamation marks under Device Manager.
Your
computer
now sees audio HW and the next step is to find the right drivers.

If the computer still doesn't see HW, not sure what to do next.

"Damon" wrote in message
...
Motherboard: Biostar MGTLA, 11/11/97-i440LX-2A69JB09C-00
Chipsets: North Bridge / Intel 82443LX PAC, South Bridge / Intel
82371AB
PIIX4

Is that enough?

-Damon

"mdp" wrote:

Post back with the motherboard and chipset info (both under
Motherboard
using Everest).

"Damon" wrote in message
...
Hmmm, not sure if I checked up on the INF files. And I
neglected
to
post
my
system specs, which is usually the first thing I do. It is a
Quantex, a
company long out of business. GenuineIntel, Pentium(r) II
Processor,
96
MB
RAM. 9FX Reality 334 graphics card (also very old and out of
business.)
I
gave up and cracked open my case; the sound card IS an
ensoniq
es1370
card,
and since Everest was right about that I am assuming it was
right
about
it
being a Creative Sound Blaster PCI 128.

That's all I can tell you, I'm not sure what these INF files
are
that
you
speak of. I'm clearly only semi-computer literate. Please
help,
and
thanks.

-Damon

"mdp" wrote:

Did you install the latest INF file(s) for your chipset per
the
previous
poster's suggestion (or rule it out)? This is often needed
for
Win9x
on
older MBs to enable exactly what you're having problems
with,
detecting
HW.
If you're not sure what this is, post back with the computer
make/model
or
motherboard make/model.

"Damon" wrote in message
...
I don't believe that Everest is wrong. I am quite sure I
have
the
sound
card
that it indicates. This computer is from early 1999-2000,
it
is
not
new.
We
upgraded the OS from Windows 95 to 98 a long time ago. I'm
quite
sure
there
was no software included for the soundcard. Even if there
was
it
would
be
irrelevant because that is what the internet is for. I
have
downloaded
many
drivers for my card off the internet.
SBPCI_WebDrvsV5_12_01.exe.
SBPCI128Setup_w9x.exe. SPCTAUDIOSetupus.exe. All of them
either
crashed
or
asked for missing files. I downloaded all the missing
files
off
the
internet
from www.soundcard-drivers.com. Still no change. And what
the
hell
is a
56k
Speakerphone?

"Franc Zabkar" wrote:

On Thu, 22 Sep 2005 22:21:01 -0700, "Damon"
put finger to keyboard
and
composed:

When I try to add the sound card driver through Add New
Hardware,
I
get
this:

"The file 'a3d.dll' on Creative Sound Blaster PCI 128
Driver
Disk
cannot
be
found."

I don't *have* a driver disk. Why would I? This stuff
came
with
the
computer, and never asked for one before. Nice products,
Microsoft.

You *should* have received a set of discs with your new
computer.
These discs would have device drivers and user manuals.
At
the
very
least you should have been given a CD for your
motherboard.

Why don't you visually identify your soundcard? Everest
may
not
be
identifying it correctly, especially if it one of those
odd
sound/modem combo cards.

"Damon" wrote:

I've already done this. The driver I downloaded
wouldn't
install
because it
couldn't find the soundcard on my computer. The
computer
can't
even
find the
damn card! It's (apparently) a Soundblaster PCI128.
I've
tried
at
least 30
different drivers in the Device Manager trying to find
one
that
works,
and
none have. The driver I downloaded doesn't even show
up
under
the
Creative
menu, either. My speakers are making wierd crackling
noises.

Fed up. I'm this close to buying a new computer, but I
am
a
college
student
and have limited funds so I hope it doesn't come to
that.
Thanks
to
all of
you for your help, though. Really appreciated.

"charlie R" wrote:

Check out this link,

http://www.ehow.com/how_5571_upgrade-drivers-sound.html


"Damon" wrote in
message
...
I downloaded Everest, which informed me that I
have a
Creative
Sound
Blaster
PCI128 (Ensoniq ES1370) sound card. (This is the
card
that
came
with
the
computer. It always used to work before.) The
Everest
program
led
me
to the
Creative website, where I downloaded the driver
and
was
told
that
it
couldn't
install because it could not detect a Sound
Blaster
card
on
my
computer.

"Franc Zabkar" wrote:

On Tue, 20 Sep 2005 21:55:03 -0700, "Damon"
put finger to
keyboard
and
composed:

I don't want to have to crack the case open
and look directly; isn't there a way to get
Windows
to
find
the
sound card so
I know what driver to download?

Many people recommend Everest Home Edition:

http://www.lavalys.hu/products/overv...?pid=1&lang=en

Otherwise Windows 98 has msinfo32.exe which will
tell
you
something
about your "problem" devices.

-- Franc Zabkar

Please remove one 'i' from my address when
replying
by
email.




-- Franc Zabkar





  #26  
Old September 30th 05, 06:08 AM
mdp
external usenet poster
 
Posts: n/a
Default

Here's another one. It has the file a3d.dll that you mentioned previously.
This download is a lot larger (23MB) than the other file I pointed you to
because it has Win95, NT, and other programs all compressed into a .rar
file. Your unzip program should be able to decompress it by double-clicking
on it.

ftp://ftp.320-8080.ru/pub/driver/sou...ES1370_pci.rar

What I'm searching on are drivers for your chipset, ES1370. That's the key.

"mdp" wrote in message
...
It is now detecting HW - problem one solved. You are close. All you need
now are the right drivers. I'll see what I can find. In the meantime,
Google is your friend.

"Damon" wrote in message
...
Okay, booting in save mode, went into Device Manager, deleted all the
bogus/phantom Audio entries and rebooted in normal. Windows detected new
Audio PCI hardware and attempted to install it. However, when it asks for
the
driver, I am stumped. I don't have a driver CD and only one of the
drivers
I've installed has created a folder. I pointed the install program to
that
folder but it couldn't find what it was looking for. Perhaps I have the
wrong
driver? I don't see how I could. Specifically "a3d.dll" or something...
not
sure what that is. So I cancelled and went to reinstall one of the
drivers,
and as it was installing, the Windows audio PCI detection window came up
again and prompted me to point it to the right driver. Again, I had
nothing
to point it to. I finished installing the driver and it appeared to have
no
difference at all.

If you know of the specific driver and the specific way I am suppose to
install it, that would be helpful.

I'm so close, I can feel it...

Thanks,

Damon

"mdp" wrote:

Right click on My Computer. Select Properties.

"Damon" wrote in message
...
Alright, got into safe mode. However...

There is no "device manager" that you speak of, unless you are talking
about
"add new hardware", which doesn't work in safe mode, or "add/remove
programs", which has nothing in it worth deleting. Sorry to hang up on
something so obvious, but I have no idea what you are talking about. I
do
know what a device manager is but there just doesn't seem to be one on
here.

"mdp" wrote:

During boot, just before the Windows splash screen displays, press
the F8
key and you will get a menu of options (during boot you can tap the
F8
key
to help 'get it' at the right time). Select Safe Mode which will
then
resume booting. Then go into Device Manager and delete (maybe it's
called
remove) everything under Sound. Reboot.


"Damon" wrote in message
...
F8? Safe Mode? What? I am given the option to "hit DELETE to enter
setup"
during booting, but there is nothing in there that I recognize. I
know
what
you are talking about, but only for our other computer at home.
Please
elaborate?

"mdp" wrote:

Somethings wrong with my ISP. I read your response but can only
reply
to
this one.

Boot into Safe Mode (press F8 while booting, select Safe Mode).
Go
into
Device Manager and delete everything under Sound. Reboot. If the
computer
begins to ask for audio drivers - this would be a success. If you
have
some, point it to the right folder otherwise cancel your way
through
and
you'll see the yellow exclamation marks under Device Manager.
Your
computer
now sees audio HW and the next step is to find the right drivers.

If the computer still doesn't see HW, not sure what to do next.

"Damon" wrote in message
...
Motherboard: Biostar MGTLA, 11/11/97-i440LX-2A69JB09C-00
Chipsets: North Bridge / Intel 82443LX PAC, South Bridge / Intel
82371AB
PIIX4

Is that enough?

-Damon

"mdp" wrote:

Post back with the motherboard and chipset info (both under
Motherboard
using Everest).

"Damon" wrote in message
...
Hmmm, not sure if I checked up on the INF files. And I
neglected
to
post
my
system specs, which is usually the first thing I do. It is a
Quantex, a
company long out of business. GenuineIntel, Pentium(r) II
Processor,
96
MB
RAM. 9FX Reality 334 graphics card (also very old and out of
business.)
I
gave up and cracked open my case; the sound card IS an
ensoniq
es1370
card,
and since Everest was right about that I am assuming it was
right
about
it
being a Creative Sound Blaster PCI 128.

That's all I can tell you, I'm not sure what these INF files
are
that
you
speak of. I'm clearly only semi-computer literate. Please
help,
and
thanks.

-Damon

"mdp" wrote:

Did you install the latest INF file(s) for your chipset per
the
previous
poster's suggestion (or rule it out)? This is often needed
for
Win9x
on
older MBs to enable exactly what you're having problems
with,
detecting
HW.
If you're not sure what this is, post back with the computer
make/model
or
motherboard make/model.

"Damon" wrote in message
...
I don't believe that Everest is wrong. I am quite sure I
have
the
sound
card
that it indicates. This computer is from early 1999-2000,
it
is
not
new.
We
upgraded the OS from Windows 95 to 98 a long time ago. I'm
quite
sure
there
was no software included for the soundcard. Even if there
was
it
would
be
irrelevant because that is what the internet is for. I
have
downloaded
many
drivers for my card off the internet.
SBPCI_WebDrvsV5_12_01.exe.
SBPCI128Setup_w9x.exe. SPCTAUDIOSetupus.exe. All of them
either
crashed
or
asked for missing files. I downloaded all the missing
files
off
the
internet
from www.soundcard-drivers.com. Still no change. And what
the
hell
is a
56k
Speakerphone?

"Franc Zabkar" wrote:

On Thu, 22 Sep 2005 22:21:01 -0700, "Damon"
put finger to keyboard
and
composed:

When I try to add the sound card driver through Add New
Hardware,
I
get
this:

"The file 'a3d.dll' on Creative Sound Blaster PCI 128
Driver
Disk
cannot
be
found."

I don't *have* a driver disk. Why would I? This stuff
came
with
the
computer, and never asked for one before. Nice products,
Microsoft.

You *should* have received a set of discs with your new
computer.
These discs would have device drivers and user manuals.
At
the
very
least you should have been given a CD for your
motherboard.

Why don't you visually identify your soundcard? Everest
may
not
be
identifying it correctly, especially if it one of those
odd
sound/modem combo cards.

"Damon" wrote:

I've already done this. The driver I downloaded
wouldn't
install
because it
couldn't find the soundcard on my computer. The
computer
can't
even
find the
damn card! It's (apparently) a Soundblaster PCI128.
I've
tried
at
least 30
different drivers in the Device Manager trying to find
one
that
works,
and
none have. The driver I downloaded doesn't even show
up
under
the
Creative
menu, either. My speakers are making wierd crackling
noises.

Fed up. I'm this close to buying a new computer, but I
am
a
college
student
and have limited funds so I hope it doesn't come to
that.
Thanks
to
all of
you for your help, though. Really appreciated.

"charlie R" wrote:

Check out this link,

http://www.ehow.com/how_5571_upgrade-drivers-sound.html


"Damon" wrote in
message
...
I downloaded Everest, which informed me that I
have a
Creative
Sound
Blaster
PCI128 (Ensoniq ES1370) sound card. (This is the
card
that
came
with
the
computer. It always used to work before.) The
Everest
program
led
me
to the
Creative website, where I downloaded the driver
and
was
told
that
it
couldn't
install because it could not detect a Sound
Blaster
card
on
my
computer.

"Franc Zabkar" wrote:

On Tue, 20 Sep 2005 21:55:03 -0700, "Damon"
put finger to
keyboard
and
composed:

I don't want to have to crack the case open
and look directly; isn't there a way to get
Windows
to
find
the
sound card so
I know what driver to download?

Many people recommend Everest Home Edition:

http://www.lavalys.hu/products/overv...?pid=1&lang=en

Otherwise Windows 98 has msinfo32.exe which will
tell
you
something
about your "problem" devices.

-- Franc Zabkar

Please remove one 'i' from my address when
replying
by
email.




-- Franc Zabkar





  #27  
Old September 30th 05, 09:52 AM
Damon
external usenet poster
 
Posts: n/a
Default

What do you know, I have sound!

The first link you sent me didn't work, just sent me to the homepage of that
File site, where I searched for the drivers but couldn't find one with the
same address as the ones you linked me too, so I just downloaded the 23 MB
one, extracted it, picked a file, opened it, ran setup. It installed the
drivers for a PCI64, not 128, but it's working just fine. (were there 128
ones in that file as well? or just the 64 because they matched my chipset?) I
can't get sound to work in my games yet, but games can wait (music is more
important in college).

Sound was working before the program had even finished installing, as it
made exclamation noises, but when it prompted me to restart and I agreed,
there was a system error and the program crashed, however the computer
restarted and everything appears to be in working order... i'm just a little
worried about having PCI 64 drivers installed when i'm not sure if that's the
card i have. i'm afraid if i tried anything else though, i would damage
something, and ruin this sense of relief.

Thank you immeasurably for all your help, but hang around just in case,

Damon

"mdp" wrote:

Here's another one. It has the file a3d.dll that you mentioned previously.
This download is a lot larger (23MB) than the other file I pointed you to
because it has Win95, NT, and other programs all compressed into a .rar
file. Your unzip program should be able to decompress it by double-clicking
on it.

ftp://ftp.320-8080.ru/pub/driver/sou...ES1370_pci.rar

What I'm searching on are drivers for your chipset, ES1370. That's the key.

"mdp" wrote in message
...
It is now detecting HW - problem one solved. You are close. All you need
now are the right drivers. I'll see what I can find. In the meantime,
Google is your friend.

"Damon" wrote in message
...
Okay, booting in save mode, went into Device Manager, deleted all the
bogus/phantom Audio entries and rebooted in normal. Windows detected new
Audio PCI hardware and attempted to install it. However, when it asks for
the
driver, I am stumped. I don't have a driver CD and only one of the
drivers
I've installed has created a folder. I pointed the install program to
that
folder but it couldn't find what it was looking for. Perhaps I have the
wrong
driver? I don't see how I could. Specifically "a3d.dll" or something...
not
sure what that is. So I cancelled and went to reinstall one of the
drivers,
and as it was installing, the Windows audio PCI detection window came up
again and prompted me to point it to the right driver. Again, I had
nothing
to point it to. I finished installing the driver and it appeared to have
no
difference at all.

If you know of the specific driver and the specific way I am suppose to
install it, that would be helpful.

I'm so close, I can feel it...

Thanks,

Damon

"mdp" wrote:

Right click on My Computer. Select Properties.

"Damon" wrote in message
...
Alright, got into safe mode. However...

There is no "device manager" that you speak of, unless you are talking
about
"add new hardware", which doesn't work in safe mode, or "add/remove
programs", which has nothing in it worth deleting. Sorry to hang up on
something so obvious, but I have no idea what you are talking about. I
do
know what a device manager is but there just doesn't seem to be one on
here.

"mdp" wrote:

During boot, just before the Windows splash screen displays, press
the F8
key and you will get a menu of options (during boot you can tap the
F8
key
to help 'get it' at the right time). Select Safe Mode which will
then
resume booting. Then go into Device Manager and delete (maybe it's
called
remove) everything under Sound. Reboot.


"Damon" wrote in message
...
F8? Safe Mode? What? I am given the option to "hit DELETE to enter
setup"
during booting, but there is nothing in there that I recognize. I
know
what
you are talking about, but only for our other computer at home.
Please
elaborate?

"mdp" wrote:

Somethings wrong with my ISP. I read your response but can only
reply
to
this one.

Boot into Safe Mode (press F8 while booting, select Safe Mode).
Go
into
Device Manager and delete everything under Sound. Reboot. If the
computer
begins to ask for audio drivers - this would be a success. If you
have
some, point it to the right folder otherwise cancel your way
through
and
you'll see the yellow exclamation marks under Device Manager.
Your
computer
now sees audio HW and the next step is to find the right drivers.

If the computer still doesn't see HW, not sure what to do next.

"Damon" wrote in message
...
Motherboard: Biostar MGTLA, 11/11/97-i440LX-2A69JB09C-00
Chipsets: North Bridge / Intel 82443LX PAC, South Bridge / Intel
82371AB
PIIX4

Is that enough?

-Damon

"mdp" wrote:

Post back with the motherboard and chipset info (both under
Motherboard
using Everest).

"Damon" wrote in message
...
Hmmm, not sure if I checked up on the INF files. And I
neglected
to
post
my
system specs, which is usually the first thing I do. It is a
Quantex, a
company long out of business. GenuineIntel, Pentium(r) II
Processor,
96
MB
RAM. 9FX Reality 334 graphics card (also very old and out of
business.)
I
gave up and cracked open my case; the sound card IS an
ensoniq
es1370
card,
and since Everest was right about that I am assuming it was
right
about
it
being a Creative Sound Blaster PCI 128.

That's all I can tell you, I'm not sure what these INF files
are
that
you
speak of. I'm clearly only semi-computer literate. Please
help,
and
thanks.

-Damon

"mdp" wrote:

Did you install the latest INF file(s) for your chipset per
the
previous
poster's suggestion (or rule it out)? This is often needed
for
Win9x
on
older MBs to enable exactly what you're having problems
with,
detecting
HW.
If you're not sure what this is, post back with the computer
make/model
or
motherboard make/model.

"Damon" wrote in message
...
I don't believe that Everest is wrong. I am quite sure I
have
the
sound
card
that it indicates. This computer is from early 1999-2000,
it
is
not
new.
We
upgraded the OS from Windows 95 to 98 a long time ago. I'm
quite
sure
there
was no software included for the soundcard. Even if there
was
it
would
be
irrelevant because that is what the internet is for. I
have
downloaded
many
drivers for my card off the internet.
SBPCI_WebDrvsV5_12_01.exe.
SBPCI128Setup_w9x.exe. SPCTAUDIOSetupus.exe. All of them
either
crashed
or
asked for missing files. I downloaded all the missing
files
off
the
internet
from www.soundcard-drivers.com. Still no change. And what
the
hell
is a
56k
Speakerphone?

"Franc Zabkar" wrote:

On Thu, 22 Sep 2005 22:21:01 -0700, "Damon"
put finger to keyboard
and
composed:

When I try to add the sound card driver through Add New
Hardware,
I
get
this:

"The file 'a3d.dll' on Creative Sound Blaster PCI 128
Driver
Disk
cannot
be
found."

I don't *have* a driver disk. Why would I? This stuff
came
with
the
computer, and never asked for one before. Nice products,
Microsoft.

You *should* have received a set of discs with your new
computer.
These discs would have device drivers and user manuals.
At
the
very
least you should have been given a CD for your
motherboard.

Why don't you visually identify your soundcard? Everest
may
not
be
identifying it correctly, especially if it one of those
odd
sound/modem combo cards.

"Damon" wrote:

I've already done this. The driver I downloaded
wouldn't
install
because it
couldn't find the soundcard on my computer. The
computer
can't
even
find the
damn card! It's (apparently) a Soundblaster PCI128.
I've
tried
at
least 30
different drivers in the Device Manager trying to find
one
that
works,
and
none have. The driver I downloaded doesn't even show
up
under
the
Creative

  #28  
Old September 30th 05, 03:31 PM
mdp
external usenet poster
 
Posts: n/a
Default

Not sure of the difference between PCI64 and PCI128. Apparently the
documentation isn't consistent either. In one of the the help files it
lists PCI128 and shows at the top of a window to configure sound the model
PCI128 even though the text description describes the PCI64. At least it
works.

Regarding the other link, make sure you didn't load (or click) on just a
piece of it, e.g. if it word wrapped to another line. Just paste in the
rest and you'll get the full link. Note, however, I did not find the
a3d.dll file anywhere in that download nor do I see any reference to PCI128.
You might be better off leaving well enough alone.


"Damon" wrote in message
...
What do you know, I have sound!

The first link you sent me didn't work, just sent me to the homepage of
that
File site, where I searched for the drivers but couldn't find one with the
same address as the ones you linked me too, so I just downloaded the 23 MB
one, extracted it, picked a file, opened it, ran setup. It installed the
drivers for a PCI64, not 128, but it's working just fine. (were there 128
ones in that file as well? or just the 64 because they matched my
chipset?) I
can't get sound to work in my games yet, but games can wait (music is more
important in college).

Sound was working before the program had even finished installing, as it
made exclamation noises, but when it prompted me to restart and I agreed,
there was a system error and the program crashed, however the computer
restarted and everything appears to be in working order... i'm just a
little
worried about having PCI 64 drivers installed when i'm not sure if that's
the
card i have. i'm afraid if i tried anything else though, i would damage
something, and ruin this sense of relief.

Thank you immeasurably for all your help, but hang around just in case,

Damon

"mdp" wrote:

Here's another one. It has the file a3d.dll that you mentioned
previously.
This download is a lot larger (23MB) than the other file I pointed you to
because it has Win95, NT, and other programs all compressed into a .rar
file. Your unzip program should be able to decompress it by
double-clicking
on it.

ftp://ftp.320-8080.ru/pub/driver/sou...ES1370_pci.rar

What I'm searching on are drivers for your chipset, ES1370. That's the
key.

"mdp" wrote in message
...
It is now detecting HW - problem one solved. You are close. All you
need
now are the right drivers. I'll see what I can find. In the meantime,
Google is your friend.

"Damon" wrote in message
...
Okay, booting in save mode, went into Device Manager, deleted all the
bogus/phantom Audio entries and rebooted in normal. Windows detected
new
Audio PCI hardware and attempted to install it. However, when it asks
for
the
driver, I am stumped. I don't have a driver CD and only one of the
drivers
I've installed has created a folder. I pointed the install program to
that
folder but it couldn't find what it was looking for. Perhaps I have
the
wrong
driver? I don't see how I could. Specifically "a3d.dll" or
something...
not
sure what that is. So I cancelled and went to reinstall one of the
drivers,
and as it was installing, the Windows audio PCI detection window came
up
again and prompted me to point it to the right driver. Again, I had
nothing
to point it to. I finished installing the driver and it appeared to
have
no
difference at all.

If you know of the specific driver and the specific way I am suppose
to
install it, that would be helpful.

I'm so close, I can feel it...

Thanks,

Damon

"mdp" wrote:

Right click on My Computer. Select Properties.

"Damon" wrote in message
...
Alright, got into safe mode. However...

There is no "device manager" that you speak of, unless you are
talking
about
"add new hardware", which doesn't work in safe mode, or "add/remove
programs", which has nothing in it worth deleting. Sorry to hang up
on
something so obvious, but I have no idea what you are talking
about. I
do
know what a device manager is but there just doesn't seem to be one
on
here.

"mdp" wrote:

During boot, just before the Windows splash screen displays, press
the F8
key and you will get a menu of options (during boot you can tap
the
F8
key
to help 'get it' at the right time). Select Safe Mode which will
then
resume booting. Then go into Device Manager and delete (maybe
it's
called
remove) everything under Sound. Reboot.


"Damon" wrote in message
...
F8? Safe Mode? What? I am given the option to "hit DELETE to
enter
setup"
during booting, but there is nothing in there that I recognize.
I
know
what
you are talking about, but only for our other computer at home.
Please
elaborate?

"mdp" wrote:

Somethings wrong with my ISP. I read your response but can
only
reply
to
this one.

Boot into Safe Mode (press F8 while booting, select Safe Mode).
Go
into
Device Manager and delete everything under Sound. Reboot. If
the
computer
begins to ask for audio drivers - this would be a success. If
you
have
some, point it to the right folder otherwise cancel your way
through
and
you'll see the yellow exclamation marks under Device Manager.
Your
computer
now sees audio HW and the next step is to find the right
drivers.

If the computer still doesn't see HW, not sure what to do next.

"Damon" wrote in message
...
Motherboard: Biostar MGTLA, 11/11/97-i440LX-2A69JB09C-00
Chipsets: North Bridge / Intel 82443LX PAC, South Bridge /
Intel
82371AB
PIIX4

Is that enough?

-Damon

"mdp" wrote:

Post back with the motherboard and chipset info (both under
Motherboard
using Everest).

"Damon" wrote in message
...
Hmmm, not sure if I checked up on the INF files. And I
neglected
to
post
my
system specs, which is usually the first thing I do. It is
a
Quantex, a
company long out of business. GenuineIntel, Pentium(r) II
Processor,
96
MB
RAM. 9FX Reality 334 graphics card (also very old and out
of
business.)
I
gave up and cracked open my case; the sound card IS an
ensoniq
es1370
card,
and since Everest was right about that I am assuming it
was
right
about
it
being a Creative Sound Blaster PCI 128.

That's all I can tell you, I'm not sure what these INF
files
are
that
you
speak of. I'm clearly only semi-computer literate. Please
help,
and
thanks.

-Damon

"mdp" wrote:

Did you install the latest INF file(s) for your chipset
per
the
previous
poster's suggestion (or rule it out)? This is often
needed
for
Win9x
on
older MBs to enable exactly what you're having problems
with,
detecting
HW.
If you're not sure what this is, post back with the
computer
make/model
or
motherboard make/model.

"Damon" wrote in
message
...
I don't believe that Everest is wrong. I am quite sure I
have
the
sound
card
that it indicates. This computer is from early
1999-2000,
it
is
not
new.
We
upgraded the OS from Windows 95 to 98 a long time ago.
I'm
quite
sure
there
was no software included for the soundcard. Even if
there
was
it
would
be
irrelevant because that is what the internet is for. I
have
downloaded
many
drivers for my card off the internet.
SBPCI_WebDrvsV5_12_01.exe.
SBPCI128Setup_w9x.exe. SPCTAUDIOSetupus.exe. All of
them
either
crashed
or
asked for missing files. I downloaded all the missing
files
off
the
internet
from www.soundcard-drivers.com. Still no change. And
what
the
hell
is a
56k
Speakerphone?

"Franc Zabkar" wrote:

On Thu, 22 Sep 2005 22:21:01 -0700, "Damon"
put finger to
keyboard
and
composed:

When I try to add the sound card driver through Add
New
Hardware,
I
get
this:

"The file 'a3d.dll' on Creative Sound Blaster PCI 128
Driver
Disk
cannot
be
found."

I don't *have* a driver disk. Why would I? This stuff
came
with
the
computer, and never asked for one before. Nice
products,
Microsoft.

You *should* have received a set of discs with your
new
computer.
These discs would have device drivers and user
manuals.
At
the
very
least you should have been given a CD for your
motherboard.

Why don't you visually identify your soundcard?
Everest
may
not
be
identifying it correctly, especially if it one of
those
odd
sound/modem combo cards.

"Damon" wrote:

I've already done this. The driver I downloaded
wouldn't
install
because it
couldn't find the soundcard on my computer. The
computer
can't
even
find the
damn card! It's (apparently) a Soundblaster PCI128.
I've
tried
at
least 30
different drivers in the Device Manager trying to
find
one
that
works,
and
none have. The driver I downloaded doesn't even
show
up
under
the
Creative



  #29  
Old September 30th 05, 03:42 PM
mdp
external usenet poster
 
Posts: n/a
Default

One other note. Games often require what's called "legacy support". You
have a help file from your download called SBP64L.HLP located in:

ES1370_pci\WIN95DRV

which addresses games. I pulled some text but you might want to browse
through the help file some more. You can probably get to all the help files
by clicking on one of your sound apps listed under Control Panel. I opened
it by double-clicking directly on the file (I'm not running Win98). Good
luck.

-------------------------------------------------------
The Sound Blaster PCI64 card is compatible with popular audio standards in
the market. Games that support the following sound modes will operate on
the Sound Blaster PCI64 card: AudioPCI, DirectX, Ensoniq Soundscape,
SoundBlaster Pro, and MPU401/Roland (Sound Canvas/General MIDI or
MT32/LAPC-1).


Three Operating Modes

You will use one of these modes when using the Sound Blaster PCI64 card in
Windows 95/98:

1 Windows 95/98 Mode
2 Windows 95/98 MS-DOS Prompt
3 Windows 95/98 MS-DOS Mode


Windows 95/98 Mode

Windows 95/98 Mode is the native mode of the Sound Blaster PCI64 card.
Games that indicate that they are for Windows 95/98 use this mode. In
general, the only thing required to play a game under Windows 95/98 is to
install the game.

Some Windows 95/98 games will use DirectX. Sound Blaster PCI64 is fully
compatible with DirectX.

Windows 95/98 MS-DOS Prompt

The majority of games currently out in the market are designed for MS-DOS
only. The Sound Blaster PCI64 card fully supports MS-DOS games. The
recommended method for playing MS-DOS games is to open an MS-DOS virtual
machine (also known as MS-DOS Prompt or MS-DOS Box), and then to install and
run the MS-DOS game. The icon, MS-DOS Prompt, should appear in the Start
Menu under Programs. This will give you an MS-DOS Prompt.

The Sound Blaster PCI64 Legacy Device must be enabled in order for MS-DOS
Prompt games to function.

Windows 95/98 MS-DOS Mode

There could be times when you may not be able or do not want to run a game
in an MS-DOS prompt. The game may be incompatible with Windows 95/98, or
you may not have enough system resources to play the game with Windows 95/98
loaded. When this happens, you can use a mechanism called MS-DOS Mode,
which loads only the real-mode portions of the operating system.

Copyright © 1998 Creative Technology Ltd.


"Damon" wrote in message
...
What do you know, I have sound!

The first link you sent me didn't work, just sent me to the homepage of
that
File site, where I searched for the drivers but couldn't find one with the
same address as the ones you linked me too, so I just downloaded the 23 MB
one, extracted it, picked a file, opened it, ran setup. It installed the
drivers for a PCI64, not 128, but it's working just fine. (were there 128
ones in that file as well? or just the 64 because they matched my
chipset?) I
can't get sound to work in my games yet, but games can wait (music is more
important in college).

Sound was working before the program had even finished installing, as it
made exclamation noises, but when it prompted me to restart and I agreed,
there was a system error and the program crashed, however the computer
restarted and everything appears to be in working order... i'm just a
little
worried about having PCI 64 drivers installed when i'm not sure if that's
the
card i have. i'm afraid if i tried anything else though, i would damage
something, and ruin this sense of relief.

Thank you immeasurably for all your help, but hang around just in case,

Damon

"mdp" wrote:

Here's another one. It has the file a3d.dll that you mentioned
previously.
This download is a lot larger (23MB) than the other file I pointed you to
because it has Win95, NT, and other programs all compressed into a .rar
file. Your unzip program should be able to decompress it by
double-clicking
on it.

ftp://ftp.320-8080.ru/pub/driver/sou...ES1370_pci.rar

What I'm searching on are drivers for your chipset, ES1370. That's the
key.

"mdp" wrote in message
...
It is now detecting HW - problem one solved. You are close. All you
need
now are the right drivers. I'll see what I can find. In the meantime,
Google is your friend.

"Damon" wrote in message
...
Okay, booting in save mode, went into Device Manager, deleted all the
bogus/phantom Audio entries and rebooted in normal. Windows detected
new
Audio PCI hardware and attempted to install it. However, when it asks
for
the
driver, I am stumped. I don't have a driver CD and only one of the
drivers
I've installed has created a folder. I pointed the install program to
that
folder but it couldn't find what it was looking for. Perhaps I have
the
wrong
driver? I don't see how I could. Specifically "a3d.dll" or
something...
not
sure what that is. So I cancelled and went to reinstall one of the
drivers,
and as it was installing, the Windows audio PCI detection window came
up
again and prompted me to point it to the right driver. Again, I had
nothing
to point it to. I finished installing the driver and it appeared to
have
no
difference at all.

If you know of the specific driver and the specific way I am suppose
to
install it, that would be helpful.

I'm so close, I can feel it...

Thanks,

Damon

"mdp" wrote:

Right click on My Computer. Select Properties.

"Damon" wrote in message
...
Alright, got into safe mode. However...

There is no "device manager" that you speak of, unless you are
talking
about
"add new hardware", which doesn't work in safe mode, or "add/remove
programs", which has nothing in it worth deleting. Sorry to hang up
on
something so obvious, but I have no idea what you are talking
about. I
do
know what a device manager is but there just doesn't seem to be one
on
here.

"mdp" wrote:

During boot, just before the Windows splash screen displays, press
the F8
key and you will get a menu of options (during boot you can tap
the
F8
key
to help 'get it' at the right time). Select Safe Mode which will
then
resume booting. Then go into Device Manager and delete (maybe
it's
called
remove) everything under Sound. Reboot.


"Damon" wrote in message
...
F8? Safe Mode? What? I am given the option to "hit DELETE to
enter
setup"
during booting, but there is nothing in there that I recognize.
I
know
what
you are talking about, but only for our other computer at home.
Please
elaborate?

"mdp" wrote:

Somethings wrong with my ISP. I read your response but can
only
reply
to
this one.

Boot into Safe Mode (press F8 while booting, select Safe Mode).
Go
into
Device Manager and delete everything under Sound. Reboot. If
the
computer
begins to ask for audio drivers - this would be a success. If
you
have
some, point it to the right folder otherwise cancel your way
through
and
you'll see the yellow exclamation marks under Device Manager.
Your
computer
now sees audio HW and the next step is to find the right
drivers.

If the computer still doesn't see HW, not sure what to do next.

"Damon" wrote in message
...
Motherboard: Biostar MGTLA, 11/11/97-i440LX-2A69JB09C-00
Chipsets: North Bridge / Intel 82443LX PAC, South Bridge /
Intel
82371AB
PIIX4

Is that enough?

-Damon

"mdp" wrote:

Post back with the motherboard and chipset info (both under
Motherboard
using Everest).

"Damon" wrote in message
...
Hmmm, not sure if I checked up on the INF files. And I
neglected
to
post
my
system specs, which is usually the first thing I do. It is
a
Quantex, a
company long out of business. GenuineIntel, Pentium(r) II
Processor,
96
MB
RAM. 9FX Reality 334 graphics card (also very old and out
of
business.)
I
gave up and cracked open my case; the sound card IS an
ensoniq
es1370
card,
and since Everest was right about that I am assuming it
was
right
about
it
being a Creative Sound Blaster PCI 128.

That's all I can tell you, I'm not sure what these INF
files
are
that
you
speak of. I'm clearly only semi-computer literate. Please
help,
and
thanks.

-Damon

"mdp" wrote:

Did you install the latest INF file(s) for your chipset
per
the
previous
poster's suggestion (or rule it out)? This is often
needed
for
Win9x
on
older MBs to enable exactly what you're having problems
with,
detecting
HW.
If you're not sure what this is, post back with the
computer
make/model
or
motherboard make/model.

"Damon" wrote in
message
...
I don't believe that Everest is wrong. I am quite sure I
have
the
sound
card
that it indicates. This computer is from early
1999-2000,
it
is
not
new.
We
upgraded the OS from Windows 95 to 98 a long time ago.
I'm
quite
sure
there
was no software included for the soundcard. Even if
there
was
it
would
be
irrelevant because that is what the internet is for. I
have
downloaded
many
drivers for my card off the internet.
SBPCI_WebDrvsV5_12_01.exe.
SBPCI128Setup_w9x.exe. SPCTAUDIOSetupus.exe. All of
them
either
crashed
or
asked for missing files. I downloaded all the missing
files
off
the
internet
from www.soundcard-drivers.com. Still no change. And
what
the
hell
is a
56k
Speakerphone?

"Franc Zabkar" wrote:

On Thu, 22 Sep 2005 22:21:01 -0700, "Damon"
put finger to
keyboard
and
composed:

When I try to add the sound card driver through Add
New
Hardware,
I
get
this:

"The file 'a3d.dll' on Creative Sound Blaster PCI 128
Driver
Disk
cannot
be
found."

I don't *have* a driver disk. Why would I? This stuff
came
with
the
computer, and never asked for one before. Nice
products,
Microsoft.

You *should* have received a set of discs with your
new
computer.
These discs would have device drivers and user
manuals.
At
the
very
least you should have been given a CD for your
motherboard.

Why don't you visually identify your soundcard?
Everest
may
not
be
identifying it correctly, especially if it one of
those
odd
sound/modem combo cards.

"Damon" wrote:

I've already done this. The driver I downloaded
wouldn't
install
because it
couldn't find the soundcard on my computer. The
computer
can't
even
find the
damn card! It's (apparently) a Soundblaster PCI128.
I've
tried
at
least 30
different drivers in the Device Manager trying to
find
one
that
works,
and
none have. The driver I downloaded doesn't even
show
up
under
the
Creative



 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Windows finds, then loses, sound cards [email protected] Multimedia 8 August 29th 05 01:55 PM
missing drivers mobo "07/20/1999 i810-NS366-6A69MV39C-00" - pls he Ian General 52 February 24th 05 05:48 AM
FAQ: Win98 users: Upgrading to WinXP, IE6, etc. JM Improving Performance 6 July 26th 04 01:44 PM
Sound card Girl N Need Multimedia 1 July 10th 04 11:47 PM
transfer of pci sound card brad General 1 June 20th 04 03:30 AM


All times are GMT +1. The time now is 07:19 PM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 Win98banter.
The comments are property of their posters.