If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Problem with Floppy drive
I'm having a problem my A:\ or my floppy drive. I am trying to access
delindex via a floppy disk and when inserted into the drive on reboot, the computer disregards whatever is in the floppy drive and continues to boot into windows. Once in windows I would right click on floppy drive icon and then click onto explore, and an error message stating "A:\ is not accessible. The system cannot read from the specified device". I would then try to run scandisk on the A:\ drive with more errors stating "Scandisk detected an error while reading your drive. Scandisk detected an error while writing to your drive". The computer would then freeze. I've tried using different floppies and also tried to update the floppy disk controller from device manager to no avail. Can anyone offer some advice on troubleshooting this problem? The floppy is my only means to get into DOS on windows Me. Thanks. |
#2
|
|||
|
|||
Have you made a Boot Floppy? If so, try it to see if it works......if it
doesn't, suspect a bad floppy drive. If you do not have a bootable floppy (other than the one for delindex), you can download a boot floppy from www.bootdisk.com . Heirloom, old and gotta go to bed "Speedy G." wrote in message ... I'm having a problem my A:\ or my floppy drive. I am trying to access delindex via a floppy disk and when inserted into the drive on reboot, the computer disregards whatever is in the floppy drive and continues to boot into windows. Once in windows I would right click on floppy drive icon and then click onto explore, and an error message stating "A:\ is not accessible. The system cannot read from the specified device". I would then try to run scandisk on the A:\ drive with more errors stating "Scandisk detected an error while reading your drive. Scandisk detected an error while writing to your drive". The computer would then freeze. I've tried using different floppies and also tried to update the floppy disk controller from device manager to no avail. Can anyone offer some advice on troubleshooting this problem? The floppy is my only means to get into DOS on windows Me. Thanks. |
#3
|
|||
|
|||
Sounds like your BIOS has been set such that the floppy drive is not being
turned on and is not set to boot from the floppy as the #1 boot device. "Speedy G." wrote in message ... I'm having a problem my A:\ or my floppy drive. I am trying to access delindex via a floppy disk and when inserted into the drive on reboot, the computer disregards whatever is in the floppy drive and continues to boot into windows. Once in windows I would right click on floppy drive icon and then click onto explore, and an error message stating "A:\ is not accessible. The system cannot read from the specified device". I would then try to run scandisk on the A:\ drive with more errors stating "Scandisk detected an error while reading your drive. Scandisk detected an error while writing to your drive". The computer would then freeze. I've tried using different floppies and also tried to update the floppy disk controller from device manager to no avail. Can anyone offer some advice on troubleshooting this problem? The floppy is my only means to get into DOS on windows Me. Thanks. |
#4
|
|||
|
|||
No go, Heirloom.
I've tried as you suggested, to no avail. Windows keeps right on loading even when floppy is inserted. I have another drive lying around here, but not sure if I have to configure anything for the new floppy drive. What do I need to know to reinstall the new floppy drive? I also checked the BIOS but the floppy is enabled. "Heirloom" wrote: Have you made a Boot Floppy? If so, try it to see if it works......if it doesn't, suspect a bad floppy drive. If you do not have a bootable floppy (other than the one for delindex), you can download a boot floppy from www.bootdisk.com . Heirloom, old and gotta go to bed "Speedy G." wrote in message ... I'm having a problem my A:\ or my floppy drive. I am trying to access delindex via a floppy disk and when inserted into the drive on reboot, the computer disregards whatever is in the floppy drive and continues to boot into windows. Once in windows I would right click on floppy drive icon and then click onto explore, and an error message stating "A:\ is not accessible. The system cannot read from the specified device". I would then try to run scandisk on the A:\ drive with more errors stating "Scandisk detected an error while reading your drive. Scandisk detected an error while writing to your drive". The computer would then freeze. I've tried using different floppies and also tried to update the floppy disk controller from device manager to no avail. Can anyone offer some advice on troubleshooting this problem? The floppy is my only means to get into DOS on windows Me. Thanks. |
#5
|
|||
|
|||
http://www.buildeasypc.com/hw/howto/instfdd.htm
"Speedy G." wrote in message ... No go, Heirloom. I've tried as you suggested, to no avail. Windows keeps right on loading even when floppy is inserted. I have another drive lying around here, but not sure if I have to configure anything for the new floppy drive. What do I need to know to reinstall the new floppy drive? I also checked the BIOS but the floppy is enabled. "Heirloom" wrote: Have you made a Boot Floppy? If so, try it to see if it works......if it doesn't, suspect a bad floppy drive. If you do not have a bootable floppy (other than the one for delindex), you can download a boot floppy from www.bootdisk.com . Heirloom, old and gotta go to bed "Speedy G." wrote in message ... I'm having a problem my A:\ or my floppy drive. I am trying to access delindex via a floppy disk and when inserted into the drive on reboot, the computer disregards whatever is in the floppy drive and continues to boot into windows. Once in windows I would right click on floppy drive icon and then click onto explore, and an error message stating "A:\ is not accessible. The system cannot read from the specified device". I would then try to run scandisk on the A:\ drive with more errors stating "Scandisk detected an error while reading your drive. Scandisk detected an error while writing to your drive". The computer would then freeze. I've tried using different floppies and also tried to update the floppy disk controller from device manager to no avail. Can anyone offer some advice on troubleshooting this problem? The floppy is my only means to get into DOS on windows Me. Thanks. |
#6
|
|||
|
|||
Before uninstalling the floppy drive I checked the connections to and from
the drive. There was a loose connection(ribbon) that I secured and that seems to fix the problem. I can now get into Dos. Thanks to all. "Sunny" wrote: http://www.buildeasypc.com/hw/howto/instfdd.htm "Speedy G." wrote in message ... No go, Heirloom. I've tried as you suggested, to no avail. Windows keeps right on loading even when floppy is inserted. I have another drive lying around here, but not sure if I have to configure anything for the new floppy drive. What do I need to know to reinstall the new floppy drive? I also checked the BIOS but the floppy is enabled. "Heirloom" wrote: Have you made a Boot Floppy? If so, try it to see if it works......if it doesn't, suspect a bad floppy drive. If you do not have a bootable floppy (other than the one for delindex), you can download a boot floppy from www.bootdisk.com . Heirloom, old and gotta go to bed "Speedy G." wrote in message ... I'm having a problem my A:\ or my floppy drive. I am trying to access delindex via a floppy disk and when inserted into the drive on reboot, the computer disregards whatever is in the floppy drive and continues to boot into windows. Once in windows I would right click on floppy drive icon and then click onto explore, and an error message stating "A:\ is not accessible. The system cannot read from the specified device". I would then try to run scandisk on the A:\ drive with more errors stating "Scandisk detected an error while reading your drive. Scandisk detected an error while writing to your drive". The computer would then freeze. I've tried using different floppies and also tried to update the floppy disk controller from device manager to no avail. Can anyone offer some advice on troubleshooting this problem? The floppy is my only means to get into DOS on windows Me. Thanks. |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
installing new hard driive, copying from old to new | Larry | General | 12 | February 17th 05 08:20 PM |
unistalling win 98 | Mathers | General | 21 | January 12th 05 04:04 AM |
floppy drive now a "b" drive? | Doug | Setup & Installation | 3 | September 22nd 04 09:55 PM |
MBR switch on FDISK | jt3 | General | 30 | June 21st 04 08:56 PM |
floppy drive problem | b3blues | Disk Drives | 1 | June 9th 04 02:31 PM |