If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
DNS settings.
I wish to employ open dns. 2 queries: 1: in config, I have "obtain IP addresses automatically" (no dns number shown) My D link router (DL524) is not shown. Can I carry on regardless and use DL624 and given dns numbers ? also I show 2 sets of ethernet NIC's I assume I put the numbers in both? Thanks for any advice / pointers. |
#2
|
|||
|
|||
DNS settings.
If your router isn't shown and configured, then no, the networking will not work. Since your questions likely may exceed a simple networking issue, try this link for some pointers: http://peoplescounsel.orgfree.com/re...NETWORKING.htm might look at this also http://peoplescounsel.orgfree.com/re.../firewalls.htm Post back in either forum [gen or here] if necessary. If you do please post the results from this [preferably in this forum]: from Start Run type in ipconfig /all /batch {with some drive, folder, and file name - example: c:\temp\ipresult.txt} and post the contents of that file... -- MEB http://peoplescounsel.orgfree.com ________ "Rod" wrote in message ... | | | I wish to employ open dns. | 2 queries: | 1: in config, I have "obtain IP addresses automatically" | (no dns number shown) | My D link router (DL524) is not shown. | | Can I carry on regardless and use DL624 and given dns numbers ? | | also I show 2 sets of ethernet NIC's | I assume I put the numbers in both? | | Thanks for any advice / pointers. | |
#3
|
|||
|
|||
DNS settings.
If your router isn't shown and configured, then no, the networking will not work. Since your questions likely may exceed a simple networking issue, try this link for some pointers: http://peoplescounsel.orgfree.com/re...NETWORKING.htm might look at this also http://peoplescounsel.orgfree.com/re.../firewalls.htm Post back in either forum [gen or here] if necessary. If you do please post the results from this [preferably in this forum]: from Start Run type in ipconfig /all /batch {with some drive, folder, and file name - example: c:\temp\ipresult.txt} and post the contents of that file... -- MEB http://peoplescounsel.orgfree.com ________ "Rod" wrote in message ... | | | I wish to employ open dns. | 2 queries: | 1: in config, I have "obtain IP addresses automatically" | (no dns number shown) | My D link router (DL524) is not shown. | | Can I carry on regardless and use DL624 and given dns numbers ? | | also I show 2 sets of ethernet NIC's | I assume I put the numbers in both? | | Thanks for any advice / pointers. | |
#4
|
|||
|
|||
DNS settings.
"MEB" meb@not wrote in message ... Since your questions likely may exceed a simple networking issue, try this link for some pointers: Before we go any further, perhaps I have not made myself clear The instructions seem fairly simple other than 2 of my settings are not shown on the site. Just in case I have misled in any way this is what I would like to do, to stop porn getting through to my 12yo http://www.opendns.com/ I was just wondering if I can insert the dns numbers as shown, and whether my DLink 524 router would be included in the 624 settings. Should I perhaps ask on site first? Thanks for addressing my problem thus far. it is appreciated. |
#5
|
|||
|
|||
DNS settings.
"Rod" wrote in message ... | | "MEB" meb@not wrote in message | ... | | Since your questions likely may exceed a simple networking issue, try | this | link for some pointers: | | Before we go any further, | perhaps I have not made myself clear | The instructions seem fairly simple other than | 2 of my settings are not shown on the site. | Just in case I have misled in any way | this is what I would like to do, to stop porn getting | through to my 12yo | http://www.opendns.com/ | | I was just wondering if I can insert the dns numbers | as shown, and whether my DLink 524 router would be | included in the 624 settings. | | Should I perhaps ask on site first? | | Thanks for addressing my problem thus far. | it is appreciated. | Oh, thanks for the clarification. Sorry, I have not used that service, I usually use other local proxies or applications which provide that service. Hopefully someone else can help you, or perhaps as you suggest, it may be prudent to ask on that service. There is another way, which many have used successfully, that being the use of a hosts file. -- MEB http://peoplescounsel.orgfree.com ________ |
#7
|
|||
|
|||
DNS settings.
"Rod" wrote in message ... | | "MEB" meb@not wrote in message | ... | | Oh, thanks for the clarification. | Sorry, I have not used that service, I usually use other local proxies or | applications which provide that service. | Hopefully someone else can help you, or perhaps as you suggest, it may be | prudent to ask on that service. | There is another way, which many have used successfully, that being the | use | of a hosts file. | | | G'day MEB, | received advice very promptly ( I am impressed) | to wit: | | Hi. | Yes, you should be able to use OpenDNS without any problems. | You do not need to change the IP address, but rather the DNS configuration. | If you click on the DNS configuration tab you should be able to add | 208.67.222.222 and 208.67.220.220 as your DNS servers. | Daniel Gifford | OpenDNS.com | ------------------------------- | Thanks for batting for my team MEB, appreciated. | Rodney | | Thanks for posting that, it will definitely make it into my data base for future potential help to others. -- MEB http://peoplescounsel.orgfree.com ________ |
#8
|
|||
|
|||
DNS settings.
|
#9
|
|||
|
|||
DNS settings.
|
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
bios settings or settings | mostwantedplumber | Setup & Installation | 2 | April 14th 06 02:11 AM |
DSR settings? | Vince via WindowsKB.com | Internet | 0 | August 10th 05 08:18 AM |
Settings | [email protected] | General | 7 | August 5th 05 01:18 AM |
C-MOS Settings | Andrew | Setup & Installation | 4 | September 23rd 04 10:47 AM |
Settings | C | Software & Applications | 1 | September 18th 04 07:56 AM |