If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
invalid page fault in kernel32.dll when starting program
Hey, I'm working on a PC for a dental office, and when I
start this database program called "dentrix" on this particular PC, it starts fine and everything, but when I click on a button that is used to open another executable (dentrix image) that is like a plug-in for this application, I get an invalid page fault error. This is the first time I've worked on a PC for this office, and this program, and its driving me nuts. I've completely formatted and reinstalled windws 98se and apps, and still get the same problem. I've swapped out the memory. I originally thought it was because of the video driver because this denimg program uses a video capture card to capture pictures, but I've downloaded the appropriate drivers and everything for this ATI AIW 128 to work with video for windows and stuff so it should work. Here's the complete text of the error message: DENIMG caused an invalid page fault in module KERNEL32.DLL at 0177:bff76840. Registers: EAX=007401d0 CS=0177 EIP=bff76840 EFLGS=00010246 EBX=007401d0 SS=017f ESP=00740000 EBP=00740014 ECX=00740098 DS=017f ESI=81682a50 FS=401f EDX=bff76855 ES=017f EDI=007400c0 GS=0000 Bytes at CS:EIP: ff 75 0c ff 75 08 ff 55 18 83 c4 10 64 8f 05 00 Stack dump: 007400dc 00740098 007401d0 bff76855 007401d0 007400a8 bff87fe9 007400c0 007401d0 007400dc 00740098 bff76855 00740288 81682a50 0083f5f4 00000000 thanks for any help, Will |
#2
|
|||
|
|||
invalid page fault in kernel32.dll when starting program
Since it happens only with this one application then the problem is likely
to be with that program rather than with Windows. Have you checked out the manufacturer's support site? http://www.dentrix.com/Support/FAQs/ -- Jeff Richards MS MVP (DTS) "Will S." wrote in message ... Hey, I'm working on a PC for a dental office, and when I start this database program called "dentrix" on this particular PC, it starts fine and everything, but when I click on a button that is used to open another executable (dentrix image) that is like a plug-in for this application, I get an invalid page fault error. This is the first time I've worked on a PC for this office, and this program, and its driving me nuts. I've completely formatted and reinstalled windws 98se and apps, and still get the same problem. I've swapped out the memory. I originally thought it was because of the video driver because this denimg program uses a video capture card to capture pictures, but I've downloaded the appropriate drivers and everything for this ATI AIW 128 to work with video for windows and stuff so it should work. Here's the complete text of the error message: DENIMG caused an invalid page fault in module KERNEL32.DLL at 0177:bff76840. Registers: EAX=007401d0 CS=0177 EIP=bff76840 EFLGS=00010246 EBX=007401d0 SS=017f ESP=00740000 EBP=00740014 ECX=00740098 DS=017f ESI=81682a50 FS=401f EDX=bff76855 ES=017f EDI=007400c0 GS=0000 Bytes at CS:EIP: ff 75 0c ff 75 08 ff 55 18 83 c4 10 64 8f 05 00 Stack dump: 007400dc 00740098 007401d0 bff76855 007401d0 007400a8 bff87fe9 007400c0 007401d0 007400dc 00740098 bff76855 00740288 81682a50 0083f5f4 00000000 thanks for any help, Will |
#3
|
|||
|
|||
invalid page fault in kernel32.dll when starting program
yes I checked on there, but the info avialable to the
public is very limited, you need a support contract/login to access the rest and I dont have one. -----Original Message----- Since it happens only with this one application then the problem is likely to be with that program rather than with Windows. Have you checked out the manufacturer's support site? http://www.dentrix.com/Support/FAQs/ -- Jeff Richards MS MVP (DTS) "Will S." wrote in message ... Hey, I'm working on a PC for a dental office, and when I start this database program called "dentrix" on this particular PC, it starts fine and everything, but when I click on a button that is used to open another executable (dentrix image) that is like a plug-in for this application, I get an invalid page fault error. This is the first time I've worked on a PC for this office, and this program, and its driving me nuts. I've completely formatted and reinstalled windws 98se and apps, and still get the same problem. I've swapped out the memory. I originally thought it was because of the video driver because this denimg program uses a video capture card to capture pictures, but I've downloaded the appropriate drivers and everything for this ATI AIW 128 to work with video for windows and stuff so it should work. Here's the complete text of the error message: DENIMG caused an invalid page fault in module KERNEL32.DLL at 0177:bff76840. Registers: EAX=007401d0 CS=0177 EIP=bff76840 EFLGS=00010246 EBX=007401d0 SS=017f ESP=00740000 EBP=00740014 ECX=00740098 DS=017f ESI=81682a50 FS=401f EDX=bff76855 ES=017f EDI=007400c0 GS=0000 Bytes at CS:EIP: ff 75 0c ff 75 08 ff 55 18 83 c4 10 64 8f 05 00 Stack dump: 007400dc 00740098 007401d0 bff76855 007401d0 007400a8 bff87fe9 007400c0 007401d0 007400dc 00740098 bff76855 00740288 81682a50 0083f5f4 00000000 thanks for any help, Will . |
#4
|
|||
|
|||
invalid page fault in kernel32.dll when starting program
Can you run the image program on its own? The error might then be different
and may offer another clue to the problem. -- Jeff Richards MS MVP (DTS) "Will S." wrote in message ... yes I checked on there, but the info avialable to the public is very limited, you need a support contract/login to access the rest and I dont have one. |
#5
|
|||
|
|||
invalid page fault in kernel32.dll when starting program
I originally thought no, if you just click on it through
explorer it gives an error and quits. However, I played with it using the command line, and it expects to recieve an integer value indicating the record number its to start with. If you give it a valid record number, it crashes with the kernel32 error. If you give it an invalid record number it gives a "cannot find record number' error and quits, if I give it a non-integer value (such as "/?") it gives an error but then opens the program (it just doesn't do what its supposed to because it needs to be linked to a database record). However, this still leaves me fresh out of ideas... -----Original Message----- Can you run the image program on its own? The error might then be different and may offer another clue to the problem. -- Jeff Richards MS MVP (DTS) "Will S." wrote in message ... yes I checked on there, but the info avialable to the public is very limited, you need a support contract/login to access the rest and I dont have one. . |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Invalid page faults in module KERNEL32.dll while downloading from internet | david | Internet | 1 | July 28th 04 01:29 PM |
WTOOLSA caused an invalid page fault in module KERNEL32.DLL | EDK | General | 0 | June 15th 04 02:32 PM |
Kernel32.dll invalid page fault - IE 6 Win98 | Juicey | General | 1 | June 8th 04 08:56 PM |
invalid page fault in modeule KERNEL32.DLL | Dave | Software & Applications | 1 | June 1st 04 06:00 PM |
invalid page fault inmodule KERNEL32.DLL at 018f:bff9db61 | Raj | Software & Applications | 0 | May 22nd 04 04:39 AM |