A Windows 98 & ME forum. Win98banter

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » Win98banter forum » Windows 98 » Monitors & Displays
Site Map Home Authors List Search Today's Posts Mark Forums Read Web Partners

Change resolution in windows 98



 
 
Thread Tools Display Modes
  #1  
Old October 21st 04, 12:27 AM
pclady
external usenet poster
 
Posts: n/a
Default Change resolution in windows 98

I reinstalled windows 98 and now I am not able to change the screen
resolution. It is not high enough to get on the internet. I went into
control panel/display/settings/adapter and tried to re-install the driver and
it says that the driver is suitable. Can you suggest anything else to try?
  #2  
Old October 21st 04, 02:59 AM
Ron Badour
external usenet poster
 
Posts: n/a
Default

When the correct screen resolution (screen area) or the right number of
colors are not available choices in display properties, settings tab, then
it is a good bet you do not have the right driver installed for your display
adapter. The display adapter in your PC is either a video card or a display
chipset on the motherboard.

If you received a CD or floppy disks with drivers along with your PC, see if
they contain a display adapter driver and install it using: control panel,
system, device manager, display adapter.

If you know what display adapter your PC has but you have no disks, use
www.google.com to track down the correct driver on the internet.

If you do not know what display adapter your PC uses, you can go to a MS-DOS
prompt and type: Debug and hit enter. The screen will display a
flashing prompt next to a - sign. Type: DC000:35 (DC000:50 may also work)
and hit enter. The name and possibly model of your display adapter should
appear on the right hand side of the screen. To quit Debug, type Q and hit
enter. If Debug is not helpful, you can try this program: Advanced PCI
Info, available at: http://www.upsystems.com.ua/support/alexmina/ If all
else fails, you will have to remove the computer case. Look at where the
monitor plugs into the back of the case and then check that location inside
the case. If there is a card there, you obviously have a video card and if
not, you have on board graphics. Write down any information displayed on
either the card or the chipset on the motherboard. Then use www.google.com
to search for the information. Do not include all the data you found in one
search message--search on each piece individually. If you include all the
information at once, you might not get a hit.

I have found that a video card will generally have to be removed in order to
see the information. Be careful of static electricity as it can fry
components. Before touching anything in the computer case (the cord is
unplugged, right?), ground yourself to the case by touching it. Don't work
on carpeting since shuffling your feet on it can generate static electricity
after you grounded yourself. Remove the one screw that holds the card in
place and using a rocking motion (left to right and back) and pull the card
straight out.

Once you have the right driver, install it through control panel, system,
device manager or through control panel, add new hardware, as appropriate.
--
Regards

Ron Badour, MS MVP for W98
Tips: http://home.satx.rr.com/badour
Knowledge Base Info:
http://support.microsoft.com/default.aspx?pr=kbinfo

"pclady" wrote in message
...
I reinstalled windows 98 and now I am not able to change the screen
resolution. It is not high enough to get on the internet. I went into
control panel/display/settings/adapter and tried to re-install the driver

and
it says that the driver is suitable. Can you suggest anything else to

try?


 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
error loading explorer.exe. SHLWAPI.dll Gary General 4 October 20th 04 04:08 AM
FAQ: Win98 users: Upgrading to WinXP, IE6, etc. JM Setup & Installation 6 July 26th 04 01:44 PM
Please help! Display settings !! Mitzi Monitors & Displays 12 July 11th 04 05:19 AM
Zero-byte D: drive should not show, C: missing from Device Manager *Vanguard* General 8 June 12th 04 04:19 AM
Windows update Kevin McCarthy General 5 May 29th 04 10:36 PM


All times are GMT +1. The time now is 06:54 PM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 Win98banter.
The comments are property of their posters.