If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
monitor problem
when I turn on the computer I get the following message,
" If you can read this message windows has succesfully initialized this display adapter. To use this adapter as part of your windows desktop, open the display option in the control panel and adjust the settings on the settings tab." The problem is I can't get into windows all I have is a blank screen with blinking curser, any help would be appreciated. |
#2
|
|||
|
|||
monitor problem
This message is found on secondary video adapters on multi-display systems, it
assumes that the 'other' monitor is already plugged into the 'other' display card. It also occurs on twin head video cards where the monitor is plugged into the secondary port. And on systems where an add in card has been added but the motherboard display adapter is still configured. Or it might just be a bug. Initially look for another connector identical to the one the video cable is connected to and try that instead. If it turns out to be the motherboard connector, you may have to disaple on-board video in the BIOS to use the add in card. -- Adaware http://www.lavasoft.de spybot http://security.kolla.de AVG free antivirus http://www.grisoft.com Etrust/Vet/CA.online Antivirus scan http://www3.ca.com/securityadvisor/virusinfo/scan.aspx Panda online AntiVirus scan http://www.pandasoftware.com/ActiveScan/ Catalog of removal tools http://www.pandasoftware.com/download/utilities/ Blocking Unwanted Parasites with a Hosts file http://mvps.org/winhelp2002/hosts.htm links provided as a courtesy, read all instructions on the pages before use Grateful thanks to the authors/webmasters "LOUIS C. ROLL" LOIS@ ATT.NET wrote in message ... | when I turn on the computer I get the following message, | | " If you can read this message windows has succesfully initialized this display adapter. | To use this adapter as part of your windows desktop, open the display option in the control panel and adjust the settings on the settings tab." | | The problem is I can't get into windows all I have is a blank screen with blinking curser, any help would be appreciated. | |
Thread Tools | |
Display Modes | |
|
|