A Windows 98 & ME forum. Win98banter

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » Win98banter forum » Windows 98 » Setup & Installation
Site Map Home Authors List Search Today's Posts Mark Forums Read Web Partners

USB/Win98



 
 
Thread Tools Display Modes
  #1  
Old November 22nd 07, 06:40 PM posted to microsoft.public.win98.setup
joe
External Usenet User
 
Posts: 1
Default USB/Win98

The board has 4 USB connectors 2 side by side with only 1 side working.All
the connections are active with Win XP.This is a new 98 install to be used
in a spare case.I do not think the USB system in DM is complete and is the
problem , but not sure.What say you.


  #2  
Old November 23rd 07, 06:28 AM posted to microsoft.public.win98.setup
Franc Zabkar
External Usenet User
 
Posts: 1,702
Default USB/Win98

On Thu, 22 Nov 2007 12:40:33 -0500, "joe" put
finger to keyboard and composed:

The board has 4 USB connectors 2 side by side with only 1 side working.All
the connections are active with Win XP.This is a new 98 install to be used
in a spare case.I do not think the USB system in DM is complete and is the
problem , but not sure.What say you.


How many OHCI (USB 1.1) and/or EHCI (USB 2.0) controllers and root
hubs do you see in Win XP DM?

What do you see in Win98 DM?

Use this MS utility to identify your USB hardwa
http://www.microsoft.com/whdc/device...p/UVCView.mspx

- Franc Zabkar
--
Please remove one 'i' from my address when replying by email.
  #3  
Old November 24th 07, 07:37 AM posted to microsoft.public.win98.setup
TE Chea
External Usenet User
 
Posts: 14
Default USB/Win98

| Use this MS utility to identify your USB hardwa
| http://www.microsoft.com/whdc/device...p/UVCView.mspx

This utility is useless, by '05 MS could instead give Win98
users new files ( like in WinME ) to control USB devices.
Sandra is better ; tells users the version # of each USB device, e.g. :-
--------------------------------------------------------------------------------
VIA Tech 3038 PCI to USB Universal Host Controller
General Information
Controller: VIA Tech 3038 PCI to USB Universal Host
Controller

Root Hub
Compound Device: No
Hub Is Bus Powered: No
Power Switching: None
Over-current Protection: None
Number of Ports: 2

Root Hub: USB Port 1
Status: Device Connected
Device Connected to Port: SEMC DSS-20 SyncStation
OEM Device Name: Future Technology Devices International, Ltd
??? (FC82)
Device Version: 4.00
Device ID: VEN_0403, DEV_FC82, PRT_00
USB Version: 1.10
Speed: Full (12Mbps)
Configuration Settings: 1
Open Pipes: 2
Transfer Type: Bulk
Data Packet Size: 8 bytes

Root Hub: USB Port 2
Status: Device Connected
Device Connected to Port: USB Mass Storage Device
OEM Device Name: Alcor Micro Corp. ??? (6369)
Device Version: 1.19
Device ID: VEN_058F, DEV_6369, PRT_00
USB Version: 2.00
Speed: Full (12Mbps)
Configuration Settings: 1
Data Packet Size: 64 bytes

VIA Tech 3038 PCI to USB Universal Host Controller
General Information
Controller: VIA Tech 3038 PCI to USB Universal Host
Controller

Root Hub
Compound Device: No
Hub Is Bus Powered: No
Power Switching: None
Over-current Protection: None
Number of Ports: 2

Root Hub: USB Port 1
Status: No Device Connected

Root Hub: USB Port 2
Status: No Device Connected

--------------------------------------------------------------------------------





  #4  
Old November 24th 07, 11:03 PM posted to microsoft.public.win98.setup
Franc Zabkar
External Usenet User
 
Posts: 1,702
Default USB/Win98

On Sat, 24 Nov 2007 14:37:28 +0800, "TE Chea" put
finger to keyboard and composed:

| Use this MS utility to identify your USB hardwa
| http://www.microsoft.com/whdc/device...p/UVCView.mspx

This utility is useless, by '05 MS could instead give Win98
users new files ( like in WinME ) to control USB devices.
Sandra is better ; tells users the version # of each USB device, e.g. :-
--------------------------------------------------------------------------------
VIA Tech 3038 PCI to USB Universal Host Controller
General Information
Controller: VIA Tech 3038 PCI to USB Universal Host
Controller

Root Hub
Compound Device: No
Hub Is Bus Powered: No
Power Switching: None
Over-current Protection: None
Number of Ports: 2

Root Hub: USB Port 1


snip

--------------------------------------------------------------------------------


This is what UVCView reports for my USB flash drive:

================================================== ===============
---===Device Information===---
English product name: "USB DISK"

ConnectionStatus:
Current Config Value: 0x01 - Device Bus Speed: Full
Device Address: 0x02
Open Pipes: 2

===Endpoint Descriptor===
bLength: 0x07
bDescriptorType: 0x05
bEndpointAddress: 0x81 - Direction: IN -
EndpointID: 1
bmAttributes: 0x02 - Bulk Transfer Type
wMaxPacketSize: 0x0040 = 0x40 bytes
bInterval: 0xFF

===Endpoint Descriptor===
bLength: 0x07
bDescriptorType: 0x05
bEndpointAddress: 0x02 - Direction: OUT -
EndpointID: 2
bmAttributes: 0x02 - Bulk Transfer Type
wMaxPacketSize: 0x0040 = 0x40 bytes
bInterval: 0xFF

===Device Descriptor===
bLength: 0x12
bDescriptorType: 0x01
bcdUSB: 0x0200
bDeviceClass: 0x00 - This is an Interface Class
Defined Device
bDeviceSubClass: 0x00
bDeviceProtocol: 0x00
bMaxPacketSize0: 0x40 = (64) Bytes
idVendor: 0x090C = Silicon Motion, Inc. -
Taiwan
idProduct: 0x1000
bcdDevice: 0x1100
iManufacturer: 0x01
English (United States) "SMI Corporation"
iProduct: 0x02
English (United States) "USB DISK"
iSerialNumber: 0x00
bNumConfigurations: 0x01

===Configuration Descriptor===
bLength: 0x09
bDescriptorType: 0x02
wTotalLength: 0x0020 - Validated
bNumInterfaces: 0x01
bConfigurationValue: 0x01
iConfiguration: 0x00
bmAttributes: 0x80 - Bus Powered
MaxPower: 0x32 = 100 mA

===Interface Descriptor===
bLength: 0x09
bDescriptorType: 0x04
bInterfaceNumber: 0x00
bAlternateSetting: 0x00
bNumEndpoints: 0x02
bInterfaceClass: 0x08 - This is a Mass Storage USB
Device Interface Class
bInterfaceSubClass: 0x06
bInterfaceProtocol: 0x50
iInterface: 0x00

===Endpoint Descriptor===
bLength: 0x07
bDescriptorType: 0x05
bEndpointAddress: 0x81 - Direction: IN -
EndpointID: 1
bmAttributes: 0x02 - Bulk Transfer Type
wMaxPacketSize: 0x0040 = 0x40 bytes
bInterval: 0xFF

===Endpoint Descriptor===
bLength: 0x07
bDescriptorType: 0x05
bEndpointAddress: 0x02 - Direction: OUT -
EndpointID: 2
bmAttributes: 0x02 - Bulk Transfer Type
wMaxPacketSize: 0x0040 = 0x40 bytes
bInterval: 0xFF
================================================== ===============

- Franc Zabkar
--
Please remove one 'i' from my address when replying by email.
 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Win98 DHCP problems (AKA why I hate Win98) Bjorn Toft Madsen Networking 4 October 13th 04 07:04 PM
Disk Space for WIN98 SE over WIN98 Charlie Z Setup & Installation 1 September 9th 04 07:03 PM
Upgrade Win98 First Edition to Win98 SE jrystar Software & Applications 1 July 20th 04 06:17 PM
Upgrade Win98 to Win98 Second Edition KANDO General 6 July 16th 04 07:44 PM
win98 and xp problem + not logging in to win98 machine Mike Ryan Networking 4 June 10th 04 02:35 AM


All times are GMT +1. The time now is 11:52 AM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.
Copyright 2004-2018 Win98banter.
The comments are property of their posters.