If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Cpu upgrade #2
I left out my system as is. Its P4 800, 512mb, 2.8 gig mhz with usb 2.0 ports.
|
#2
|
|||
|
|||
You also said "I was told by my program manufacturer ( ATI ) that in order
to get my program to work I should upgrade my cpu, video card and usb. ..but to call my vendor first. i did call my vendor and he says you cannot upgrade a cpu. The only way is to replace it with another cpu. Is this true? I don't know if he's knows what he's talking about..so much for vendor support tech help" "Anthonage" wrote in message ... I left out my system as is. Its P4 800, 512mb, 2.8 gig mhz with usb 2.0 ports. You have 2.8GHz P4 running on a 800 MHz bus. Nothing much faster available. Nothing wrong here. USB 2.0 ports. Nothing wrong here. You said nothing about the video card. ATI makes video cards primarily, and software for those video cards. It would help if we knew exactly what you intend to install. |
#3
|
|||
|
|||
Cpu upgrade #2
You also said "I was told by my program manufacturer ( ATI ) that in order
to get my program to work I should upgrade my cpu, video card and usb. ..but to call my vendor first. i did call my vendor and he says you cannot upgrade a cpu. The only way is to replace it with another cpu. Is this true? I don't know if he's knows what he's talking about..so much for vendor support tech help" "Anthonage" wrote in message ... I left out my system as is. Its P4 800, 512mb, 2.8 gig mhz with usb 2.0 ports. You have 2.8GHz P4 running on a 800 MHz bus. Nothing much faster available. Nothing wrong here. USB 2.0 ports. Nothing wrong here. You said nothing about the video card. ATI makes video cards primarily, and software for those video cards. It would help if we knew exactly what you intend to install. |
#4
|
|||
|
|||
Anthonage wrote:
I left out my system as is. Its P4 800, 512mb, 2.8 gig mhz with usb 2.0 ports. =20 What a waste... --=20 dadiOH ____________________________ dadiOH's dandies v3.05... ....a help file of info about MP3s, recording from LP/cassette and tips & tricks on this and that. Get it at http://mysite.verizon.net/xico |
#5
|
|||
|
|||
Cpu upgrade #2
Anthonage wrote:
I left out my system as is. Its P4 800, 512mb, 2.8 gig mhz with usb 2.0 ports. What a waste... -- dadiOH ____________________________ dadiOH's dandies v3.05... ....a help file of info about MP3s, recording from LP/cassette and tips & tricks on this and that. Get it at http://mysite.verizon.net/xico |
#6
|
|||
|
|||
Cpu upgrade #2 TO dadiOH
Anthonage wrote:
I left out my system as is. Its P4 800, 512mb, 2.8 gig mhz with usb 2.0 ports. =20 What a waste... What the **** is your problem with these scarcastic remarks? No one held a gun to your head to answer. Got nothing better to do than to critize others who, according to you, are misinformed? Imagine if we all knew the answers to everything. Go backto your webpage ****head. |
#7
|
|||
|
|||
Cpu upgrade #2 TO dadiOH
"Anthonage" wrote in message ... Anthonage wrote: I left out my system as is. Its P4 800, 512mb, 2.8 gig mhz with usb 2.0 ports. =20 What a waste... What the **** is your problem with these scarcastic remarks? No one held a gun to your head to answer. Got nothing better to do than to critize others who, according to you, are misinformed? Imagine if we all knew the answers to everything. Go backto your webpage ****head. Don't get so wound up. This happens a lot in ngs. What is the program you are trying to install? From the above, its hard to tell the speed of your cpu. Is it 800MHz or 2.8GHz? Is you hard drive 2.8GB? On the box the new program came in, does it have a recommended minimum specifications needed to run the program. If you actually do need to upgrade your cpu, vid card, USB to run that program, then I would suggest either not installing that program or buying a new computer. CPU's have to be replaced. You can not upgrade them software-wise (actually you can overclock them sometimes). Many motherboards (the circuit board that the cpu sits on Same goes with a video card. You can install the latest video card drivers, but that will not ususally be sufficient to run a more demanding program than the card is designed for. That card would also have to be replaced. If your hard drive is only 2.8GBs, than it may be too small for your new program. |
#8
|
|||
|
|||
"Anthonage" wrote in message ... I left out my system as is. Its P4 800, 512mb, 2.8 gig mhz with usb 2.0 ports. I think I finally figured out what your system may be. I think your cpu is a Pentium 2.8GHz running on an 800MHz bus. That cpu should be fast enough for basically you buy. 512 MB should also be enough to run that program. |
#9
|
|||
|
|||
Cpu upgrade #2
"Anthonage" wrote in message ... I left out my system as is. Its P4 800, 512mb, 2.8 gig mhz with usb 2.0 ports. I think I finally figured out what your system may be. I think your cpu is a Pentium 2.8GHz running on an 800MHz bus. That cpu should be fast enough for basically you buy. 512 MB should also be enough to run that program. |
#10
|
|||
|
|||
Cpu upgrade #2 TO dadiOH
What did you download from Intel?
Bios upgrade ? "Anthonage" wrote in message ... Don't get so wound up. This happens a lot in ngs. I can't believe I'm responding to the same person who critized my post. Why couldn't you respond in the civil way as you do now. We don't know each other. I admit it was my fault in omitting vital info of my system. That is why I entered the #2. I thank you for advising me on that. I have an external ati usb tv tuner that worked just fine when i had win98. Now, that i bought a new computer of which I gave my stats, with xp, and so called updated drivers for xp, I'm having a difficult time getting it to work. I've been exchanging emails with ATI tech's for months, and getting no where. Finally one of them suggested that I upgrade my cpu, video card and usb software. The cpu confuses me, because at Intel they have a later version which i d/l for my cpu socket. So I was suprised to hear that one has to actually replace the cpu. I am not going to do that, I just bought this computer 6 months ago. The speed is 2.8Ghz. My hd is 80gigs, so the unit should be able to run easily on this computer..but even I know its a lot saying then doing when it comes to drivers. This unit does not come with card. Well, I did upgrade the video card, which the tech says to make sure it has Direct Sound. I don't know what they mean, and of course they don't explain. The usb has 2.0 drivers are installed. So even with their suggestion I can't get it to work fully. I get all the 5 features, and they all work fine except for the TV display, which is the most important. Each time I click on it to start, the screen goes black and xp reboots... |
|
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Can't upgrade to Windows 2000 | Mitch | General | 2 | September 15th 04 11:59 PM |
Windows 98 Upgrade Problem | Jeff | General | 1 | August 30th 04 03:26 AM |
Windows 98SE OEM Upgrade Trial | Wayne R. Russ | General | 2 | July 13th 04 12:01 AM |
windows could not upgrade" | bill hewitt | Software & Applications | 1 | June 8th 04 11:15 PM |
unable to upgrade to Win98SE from Win95 | Rex Ripplinger | Setup & Installation | 1 | June 3rd 04 05:38 PM |