Re-install of IE6

....and as soon as you get to Windows following the change to progman.exe, it
still bombs out with the Browseui error?


--
Noel Paton (MS-MVP 2002-2004, Win9x)

Nil Carborundum Illegitemi
http://www.btinternet.com/~winnoel/millsrpch.htm

Please read http://dts-l.org/goodpost.htm on how to post messages to NG's
or
http://www.microsoft.com/presspass/f.../Mar27pmvp.asp
"NoL" wrote in message
...
Yes I can boot to DOS from startup disk that I made.


-----Original Message-----
Can you get to DOS prompt with a Win ME floppy?
If not, then you need to change the boot order in the
BIOS Setup so that you
boot from the floppy before accessing the HD.

--
Noel Paton (MS-MVP 2002-2004, Win9x)

Nil Carborundum Illegitemi
http://www.btinternet.com/~winnoel/millsrpch.htm

Please read http://dts-l.org/goodpost.htm on how to post
messages to NG's
or
http://www.microsoft.com/presspass/f...2001/Mar01/Mar
27pmvp.asp
"NoL" wrote in message
...
Safe mode Booting: Same Error Message

Using Method 1: I cannot access ANYTHING on the CPU
without the message appearing.

I believe that active desktop was enabled. But now I get
these error messages everytime I try to do anything. I
cannot even use shortcut keys to access programs or
other
things.

TIA

NoL



-----Original Message-----
Browseui shouldn't be being used at all - since AFAIK
you've uninstalled it
with IERadicator!
Do you have Active Desktop enabled?

What happens if you boot to Safe Mode?

If you get the same error, try Method 1 in the
following
link
http://support.microsoft.com/?scid=293174

except when it says to go to Add/Remove programs (Step
6), instead start the
installer for IE6 that you've downloaded.


--
Noel Paton (MS-MVP 2002-2004, Win9x)

Nil Carborundum Illegitemi
http://www.btinternet.com/~winnoel/millsrpch.htm

Please read http://dts-l.org/goodpost.htm on how to
post
messages to NG's
or

http://www.microsoft.com/presspass/f...2001/Mar01/Mar
27pmvp.asp
"Noel" wrote in
message
...
Okay- this is what I have done so far.....

I followed the instructions from the webpage.
I have uninstalled IE and rebooted, waited five
minutes
and rebooted again.
Upon this reboot I get a message that states
"Explorer has caused an error in Browseui.dll
Explorer
will now close." Once I hit "Close" I can do nothing
else
with out getting this message- that includes
the "Start"
button too.

What now?

TIA

NoL


-----Original Message-----
As the site I pointed you at says - the instructions
for
a full download are
here.
http://www.broomeman.com/support/wsiedown.html

--
Noel Paton (MS-MVP 2002-2004, Win9x)

Nil Carborundum Illegitemi
http://www.btinternet.com/~winnoel/millsrpch.htm

Please read http://dts-l.org/goodpost.htm on how to
post
messages to NG's
or


http://www.microsoft.com/presspass/f...2001/Mar01/Mar
27pmvp.asp
"Noel" wrote in message
...
Thanks, I will try this once I get a full
installation
copy of IE6.

Is the IE6 from the microsoft page ok? This one
will
execute and then download the applicable parts
during
the
installation process.


Thanks

NoL
-----Original Message-----
Reinstalling ME over itself? - your only option
may
be
to
completely remove
and reinstall IE

Look here - and please, ask questions first so
that
you
know exactly what
you're doing!
http://www.btinternet.com/~winnoel/ReInIE.htm

--
Noel Paton (MS-MVP 2002-2004, Win9x)

Nil Carborundum Illegitemi
http://www.btinternet.com/~winnoel/millsrpch.htm

Please read http://dts-l.org/goodpost.htm on how
to
post
messages to NG's
or



http://www.microsoft.com/presspass/f...2001/Mar01/Mar
27pmvp.asp
"Noel" wrote in message
...
I have a laptop that recently had WinMe
reinstalled
due
to
an error.
Now, I cannot performt the Windows patch that
upgrades
from IE5.5 to IE6. The install will download
and
execute
but gives me an error message that it was not
completed.
I tried the MS bulletin about un-installing
IE6,
but
I
could not complete it. It was not accurate. I
had
un-
install option for IE and could not perform the
command
line function, there was no log.txt file.

Any suggestions?

NoL


.



.



.



.

Yes it did.

But I followed kb-289799 and was able to run your
suggested program with a successful outcome.
I have just finished up the install of the last critical
patch.

So far there is no issues using the IE6 for the limited
amount that I have.
I will keep you informed here

Thank you for all your help!!!

NoL



-----Original Message-----
....and as soon as you get to Windows following the
change to progman.exe, it
still bombs out with the Browseui error?


--
Noel Paton (MS-MVP 2002-2004, Win9x)

Nil Carborundum Illegitemi
http://www.btinternet.com/~winnoel/millsrpch.htm

Please read http://dts-l.org/goodpost.htm on how to post
messages to NG's
or
http://www.microsoft.com/presspass/f...2001/Mar01/Mar
27pmvp.asp
"NoL" wrote in
message
...
Yes I can boot to DOS from startup disk that I made.


-----Original Message-----
Can you get to DOS prompt with a Win ME floppy?
If not, then you need to change the boot order in the
BIOS Setup so that you
boot from the floppy before accessing the HD.

--
Noel Paton (MS-MVP 2002-2004, Win9x)

Nil Carborundum Illegitemi
http://www.btinternet.com/~winnoel/millsrpch.htm

Please read http://dts-l.org/goodpost.htm on how to
post
messages to NG's
or

http://www.microsoft.com/presspass/f...2001/Mar01/Mar
27pmvp.asp
"NoL" wrote in message
...
Safe mode Booting: Same Error Message

Using Method 1: I cannot access ANYTHING on the CPU
without the message appearing.

I believe that active desktop was enabled. But now I
get
these error messages everytime I try to do anything.
I
cannot even use shortcut keys to access programs or
other
things.

TIA

NoL



-----Original Message-----
Browseui shouldn't be being used at all - since
AFAIK
you've uninstalled it
with IERadicator!
Do you have Active Desktop enabled?

What happens if you boot to Safe Mode?

If you get the same error, try Method 1 in the
following
link
http://support.microsoft.com/?scid=293174

except when it says to go to Add/Remove programs
(Step
6), instead start the
installer for IE6 that you've downloaded.


--
Noel Paton (MS-MVP 2002-2004, Win9x)

Nil Carborundum Illegitemi
http://www.btinternet.com/~winnoel/millsrpch.htm

Please read http://dts-l.org/goodpost.htm on how to
post
messages to NG's
or


http://www.microsoft.com/presspass/f...2001/Mar01/Mar
27pmvp.asp
"Noel" wrote in
message
...
Okay- this is what I have done so far.....

I followed the instructions from the webpage.
I have uninstalled IE and rebooted, waited five
minutes
and rebooted again.
Upon this reboot I get a message that states
"Explorer has caused an error in Browseui.dll
Explorer
will now close." Once I hit "Close" I can do
nothing
else
with out getting this message- that includes
the "Start"
button too.

What now?

TIA

NoL


-----Original Message-----
As the site I pointed you at says - the
instructions
for
a full download are
here.
http://www.broomeman.com/support/wsiedown.html

--
Noel Paton (MS-MVP 2002-2004, Win9x)

Nil Carborundum Illegitemi
http://www.btinternet.com/~winnoel/millsrpch.htm

Please read http://dts-l.org/goodpost.htm on how
to
post
messages to NG's
or



http://www.microsoft.com/presspass/f...2001/Mar01/Mar
27pmvp.asp
"Noel" wrote in message
...
Thanks, I will try this once I get a full
installation
copy of IE6.

Is the IE6 from the microsoft page ok? This one
will
execute and then download the applicable parts
during
the
installation process.


Thanks

NoL
-----Original Message-----
Reinstalling ME over itself? - your only
option
may
be
to
completely remove
and reinstall IE

Look here - and please, ask questions first so
that
you
know exactly what
you're doing!
http://www.btinternet.com/~winnoel/ReInIE.htm

--
Noel Paton (MS-MVP 2002-2004, Win9x)

Nil Carborundum Illegitemi

http://www.btinternet.com/~winnoel/millsrpch.htm

Please read http://dts-l.org/goodpost.htm on
how
to
post
messages to NG's
or




http://www.microsoft.com/presspass/f...2001/Mar01/Mar
27pmvp.asp
"Noel" wrote in message
...
I have a laptop that recently had WinMe
reinstalled
due
to
an error.
Now, I cannot performt the Windows patch
that
upgrades
from IE5.5 to IE6. The install will download
and
execute
but gives me an error message that it was
not
completed.
I tried the MS bulletin about un-installing
IE6,
but
I
could not complete it. It was not accurate.
I
had
un-
install option for IE and could not perform
the
command
line function, there was no log.txt file.

Any suggestions?

NoL


.



.



.



.



.

Great - thanks for the feedback and the link - I'll update the page later
this weekend to reflect your problems, and the fix.

Good work! - well done.

--
Noel Paton (MS-MVP 2002-2004, Win9x)

Nil Carborundum Illegitemi
http://www.btinternet.com/~winnoel/millsrpch.htm

Please read http://dts-l.org/goodpost.htm on how to post messages to NG's
or
http://www.microsoft.com/presspass/f.../Mar27pmvp.asp
"NoL" wrote in message
...
Yes it did.

But I followed kb-289799 and was able to run your
suggested program with a successful outcome.
I have just finished up the install of the last critical
patch.

So far there is no issues using the IE6 for the limited
amount that I have.
I will keep you informed here

Thank you for all your help!!!

NoL



-----Original Message-----
....and as soon as you get to Windows following the
change to progman.exe, it
still bombs out with the Browseui error?


--
Noel Paton (MS-MVP 2002-2004, Win9x)

Nil Carborundum Illegitemi
http://www.btinternet.com/~winnoel/millsrpch.htm

Please read http://dts-l.org/goodpost.htm on how to post
messages to NG's
or
http://www.microsoft.com/presspass/f...2001/Mar01/Mar
27pmvp.asp
"NoL" wrote in
message
...
Yes I can boot to DOS from startup disk that I made.


-----Original Message-----
Can you get to DOS prompt with a Win ME floppy?
If not, then you need to change the boot order in the
BIOS Setup so that you
boot from the floppy before accessing the HD.

--
Noel Paton (MS-MVP 2002-2004, Win9x)

Nil Carborundum Illegitemi
http://www.btinternet.com/~winnoel/millsrpch.htm

Please read http://dts-l.org/goodpost.htm on how to
post
messages to NG's
or

http://www.microsoft.com/presspass/f...2001/Mar01/Mar
27pmvp.asp
"NoL" wrote in message
...
Safe mode Booting: Same Error Message

Using Method 1: I cannot access ANYTHING on the CPU
without the message appearing.

I believe that active desktop was enabled. But now I
get
these error messages everytime I try to do anything.
I
cannot even use shortcut keys to access programs or
other
things.

TIA

NoL



-----Original Message-----
Browseui shouldn't be being used at all - since
AFAIK
you've uninstalled it
with IERadicator!
Do you have Active Desktop enabled?

What happens if you boot to Safe Mode?

If you get the same error, try Method 1 in the
following
link
http://support.microsoft.com/?scid=293174

except when it says to go to Add/Remove programs
(Step
6), instead start the
installer for IE6 that you've downloaded.


--
Noel Paton (MS-MVP 2002-2004, Win9x)

Nil Carborundum Illegitemi
http://www.btinternet.com/~winnoel/millsrpch.htm

Please read http://dts-l.org/goodpost.htm on how to
post
messages to NG's
or


http://www.microsoft.com/presspass/f...2001/Mar01/Mar
27pmvp.asp
"Noel" wrote in
message
...
Okay- this is what I have done so far.....

I followed the instructions from the webpage.
I have uninstalled IE and rebooted, waited five
minutes
and rebooted again.
Upon this reboot I get a message that states
"Explorer has caused an error in Browseui.dll
Explorer
will now close." Once I hit "Close" I can do
nothing
else
with out getting this message- that includes
the "Start"
button too.

What now?

TIA

NoL


-----Original Message-----
As the site I pointed you at says - the
instructions
for
a full download are
here.
http://www.broomeman.com/support/wsiedown.html

--
Noel Paton (MS-MVP 2002-2004, Win9x)

Nil Carborundum Illegitemi
http://www.btinternet.com/~winnoel/millsrpch.htm

Please read http://dts-l.org/goodpost.htm on how
to
post
messages to NG's
or



http://www.microsoft.com/presspass/f...2001/Mar01/Mar
27pmvp.asp
"Noel" wrote in message
...
Thanks, I will try this once I get a full
installation
copy of IE6.

Is the IE6 from the microsoft page ok? This one
will
execute and then download the applicable parts
during
the
installation process.


Thanks

NoL
-----Original Message-----
Reinstalling ME over itself? - your only
option
may
be
to
completely remove
and reinstall IE

Look here - and please, ask questions first so
that
you
know exactly what
you're doing!
http://www.btinternet.com/~winnoel/ReInIE.htm

--
Noel Paton (MS-MVP 2002-2004, Win9x)

Nil Carborundum Illegitemi

http://www.btinternet.com/~winnoel/millsrpch.htm

Please read http://dts-l.org/goodpost.htm on
how
to
post
messages to NG's
or




http://www.microsoft.com/presspass/f...2001/Mar01/Mar
27pmvp.asp
"Noel" wrote in message
...
I have a laptop that recently had WinMe
reinstalled
due
to
an error.
Now, I cannot performt the Windows patch
that
upgrades
from IE5.5 to IE6. The install will download
and
execute
but gives me an error message that it was
not
completed.
I tried the MS bulletin about un-installing
IE6,
but
I
could not complete it. It was not accurate.
I
had
un-
install option for IE and could not perform
the
command
line function, there was no log.txt file.

Any suggestions?

NoL


.



.



.



.



.