If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#71
|
|||
|
|||
How to fix the bootup screen logo after running setup
thanatoid wrote: "PCR" wrote in : SNIP You seem to have something extra. If I were willing to trust my memory this soon after it lied, I'd probably say I doubt I ever saw my BIOS post a message. For a while a while ago, it was beeping at me quickly thrice-- but that's gone away! Before that, it was beeping once or twice-- but I'm fairly sure that's gone too now! Beeps MAY indicate memory and other problems. Look on the HP site and find out what the beeps mean for your machine. I never found a description of beeps at that site, but found various ones elsewhere. But I haven't heard any beeps in a while. So, it didn't matter I never could quite figure which beep list applied to me. And it didn't come in the Compaq manuals, either, not that I've spotted. [BTW, I tried the BIOS logo flash utility... it has a variety of weird restrictions AFA the "image", and it took about twenty times and the furthest I got was "image palette error" or something, but I did it just like it's supposed to be, RLE compressed BMP and everything, 64KB or less... Who cares... You mean just to alter the Compaq logo screen? I can only guess on that. Looks like Zabkar is the one for that. Somewhere in the course of this thread, I came to believe you already had changed your Compaq logo to be Natashia. I see I was wrong, & you actually said it was the Win98Lite Logo.sys that was changed. Right, and BECAUSE OF YOU AND YOUR NAGGING ;-) I ended up trying to flash the stupid BIOS Logo, and the only thing left to try is to alter the original (the ONLY thing the damn program WOULD do was to save the original logo so I have it as a BMP file now and can try editing it instead of making a /new/ BMP RLE file to their /STUPID SPECS/. Sounds like I'm lucky I didn't get that capability with my 7470! I hesitate to offer any advice. I'd rather Zabkar be blamed for the worse outcomes! :-). OK. But THAT should block out Config.sys & Autoexec.bat! (2) MS Startup Menu. Mine is set for 10 seconds in MSDOS.sys... BootMenu=1 BootMenuDelay=10 But hit ENTER, & it goes away immediately. This I knew, and in spite of getting old, 3 or 5 secs is enough for me. I didn't like it that short. Size doesn't matter. SNIP Right. But you see it with Logo=1? Yes. How many more times do I have to tell you? It pops into Natasha for 30 seconds. And what the hell gave you ANY idea she is dancing? I know these days it appears mandatory for all dancers and backup singers to wear bikinis (for lack of a better term), and I did say she is wearing a white bikini, but please do not confuse a startup screen with the "virtual girl" annoyance. (4) The Windows desktop & its wallpaper. R-Clk Desktop, Properties. Sure... but what is the point of mentioning it here? I became mixed up somehow. I thought you were seeing Natashia twice with (what might be) DOS in between. YES. I /DO/, but only when the Windows 98 (DOS shell) is starting... way past BIOS! I thought wallpaper might be the 2nd Natashia after your Natasha. Are you just trying to drive me crazy? Is that what this thread is about now? Compaq logo (which I know now isn't one-- IF there are two). No offense, but either you ARE trying to drive me crazy or we seem to have a slight cognitive mismatch... This is really beginning to remind me of some group therapy arguments I was part of in the good old days... Anyway, I won't repeat what I already said 3 or 4 times... If "@ECHO OFF" controls what you see, what you see is the DOS of Config.sys & Autoexec.bat. But those shouldn't show when Logo=1 in MSDOS.sys. The MS logo hid that for me. Also shows the autoexec.bat file, which I can ECHO out but then it shows the c:\ECHO OFF That shouldn't be! It should be obscured behind the MS logo. Many things SHOULD BE in MS products. I just look3d at my MS-DOS 5 book... At the time of its printing, the MS slogan used to be "Making it all make sense[TM]". Right. Uh-huh. I'm certainly about to give up. I see System Commander may be involved too. I must leave that between you & MEB. I dumped System Manager. I thought I'd play around with Damn Small Linux (I ran it from a virtual drive and it works great) but what's the point. That's what happened here. Are you sure you are set Logo=1 in MSDOS.sys? Can it be the 2nd Frenchwoman you see is the wallpaer? I already /told you/ she's Canadian! And it's the same Windows logo.sys but for SOME reason the damn startup menu interrupts it every time! I thought for sure it was a dancing Frenchwoman. My Startup Menu shows up BEFORE my Logo.sys. MSDOS.sys is before the menu. IO.sys is before MSDOS.sys. MBR boot code is before IO.sys. BIOS is before MBR boot code. Could be System Commander has changed one of the 10 commandments for you-- as MEB seems to be saying. I can't say for sure! It ALWAYS happened this way with 98SE. For about 4 or so years I've had this computer. I got really fed up with wallpapers a long time ago, after collecting about a zillion of them... made some of my own too... Way too much free time... Now I don't even have a custom color scheme - I'm on plum now IIRC... I went to a lot of trouble to set up an all greyshade scheme and I have it saved, I can see all that. Now/then I switch Desktop Themes, but I hardly look much at the Desktop, really. Themes? No thanks. but for some reason on my "new" "monitor", (LG 17", last new CRT I could find around here) it shows up in very faint shades of colors. I MAY have had the graphics set to High Color not 32bit, like I do now, but for now I don't see much point in checking if the greyscale scheme look OK now or not... Do I sound a little jaded? I don't know. And I don't really want to talk about monitors. This is the 3rd one about to go! An Envision EN5400e! I was so happy with it at first! Now, its buttons won't work-- even the on/off button must be pressed multiple times to work. And a week/so ago-- it was going on/off by itself while I was trying to post! I often find it has gone on by itself overnight! But my colors are fine. Sigh. Maybe I should use the F8 (IIRC) method for the startup menu... Tried it, the stupid Compaq boot mechanism gives me about 1/100 of a second to hit the F8 key (if I hit it too early it gets me into the BIOS, why i don't know...) so I had to go back to the bootmenu=1... SNIP (a) "START, Run, MSConfig, Advanced button" (b) Uncheck "Enable Startup Menu" (c) Reboot -- I guess -- to enable MSConfig to complete, or check inside MSDOS.sys to see whether it's done. (d) Open MSDOS.sys & manually enter... BootMenu=0 BootMenuDelay=5 When set through MSConfig, you get 30 seconds. Can it be doing it each boot? I am unchecked in MSConfig & still get my menu (for 10 seconds). Sigh... I never even SAW MS Config until a few years ago when someone mentioned it. I can't find it in the Windows directory but when I typed the run command you gave above, it did show up. I think I prefer just editing ini files. Anyway, I saw it today for the 2nd time in my life, and I only remember that I DID see it one before but I don't /actually remember/ seeing it, I just /know/ I did. It's late. I did set memory to 500 and we'll see what happens. I have a 3.1 program that won't run because there's not enough and too much memory at once. (It USED to of course, before all world's computers started plotting against me... So I installed Tiny XP, same thing. Maybe I'll just have to install win 3.11 on ANOTHER partition. Am I having fun yet? -- Thanks or Good Luck, There may be humor in this post, and, Naturally, you will not sue, Should things get worse after this, PCR |
#72
|
|||
|
|||
How to fix the bootup screen logo after running setup
Clicked SEND too soon. Here's the rest.
thanatoid wrote: "PCR" wrote in : SNIP You seem to have something extra. If I were willing to trust my memory this soon after it lied, I'd probably say I doubt I ever saw my BIOS post a message. For a while a while ago, it was beeping at me quickly thrice-- but that's gone away! Before that, it was beeping once or twice-- but I'm fairly sure that's gone too now! Beeps MAY indicate memory and other problems. Look on the HP site and find out what the beeps mean for your machine. I never found a description of beeps at that site, but found various ones elsewhere. But I haven't heard any beeps in a while. So, it didn't matter I never could quite figure which beep list applied to me. And it didn't come in the Compaq manuals, either, not that I've spotted. [BTW, I tried the BIOS logo flash utility... it has a variety of weird restrictions AFA the "image", and it took about twenty times and the furthest I got was "image palette error" or something, but I did it just like it's supposed to be, RLE compressed BMP and everything, 64KB or less... Who cares... You mean just to alter the Compaq logo screen? I can only guess on that. Looks like Zabkar is the one for that. Somewhere in the course of this thread, I came to believe you already had changed your Compaq logo to be Natashia. I see I was wrong, & you actually said it was the Win98Lite Logo.sys that was changed. Right, and BECAUSE OF YOU AND YOUR NAGGING I ended up trying to flash the stupid BIOS Logo, and the only thing left to try is to alter the original (the ONLY thing the damn program WOULD do was to save the original logo so I have it as a BMP file now and can try editing it instead of making a new BMP RLE file to their STUPID SPECS. Sounds like I'm lucky I didn't get that capability with my 7470! I hesitate to offer any advice. I'd rather Zabkar be blamed for the worse outcomes! :-). OK. But THAT should block out Config.sys & Autoexec.bat! (2) MS Startup Menu. Mine is set for 10 seconds in MSDOS.sys... BootMenu=1 BootMenuDelay=10 But hit ENTER, & it goes away immediately. This I knew, and in spite of getting old, 3 or 5 secs is enough for me. I didn't like it that short. Size doesn't matter. LOL! SNIP Right. But you see it with Logo=1? Yes. How many more times do I have to tell you? It's unbelievable! It pops into Natasha for 30 seconds. I've really given up on that. But ... maybe ... itemize the order in which you see the following-- both with the MS logo activated & with it de-activated. Perhaps also toggle whether the Startup Menu is activated. Is it possible to toggle System Commander? (1) BIOS logo Screen (2) System Commander screen (3) MS Startup Menu (4a) MS logo screen (Natasha) (4b) DOS lines of Config.sys/Autoexec.bat (5) Whatever else you see When you deactivate the MS logo-- do you see Natasha at all? And what the hell gave you ANY idea she is dancing? I know these days it appears mandatory for all dancers and backup singers to wear bikinis (for lack of a better term), and I did say she is wearing a white bikini, but please do not confuse a startup screen with the "virtual girl" annoyance. All Frenchwomen dance! (4) The Windows desktop & its wallpaper. R-Clk Desktop, Properties. Sure... but what is the point of mentioning it here? I became mixed up somehow. I thought you were seeing Natashia twice with (what might be) DOS in between. YES. I DO, but only when the Windows 98 (DOS shell) is starting... way past BIOS! Foof! I really don't see how Logo.sys would show twice. I still want to believe there is a second source of the image. I thought wallpaper might be the 2nd Natashia after your Natasha. Are you just trying to drive me crazy? Is that what this thread is about now? Compaq logo (which I know now isn't one-- IF there are two). No offense, but either you ARE trying to drive me crazy or we seem to have a slight cognitive mismatch... This is really beginning to remind me of some group therapy arguments I was part of in the good old days... I guess one of us could have a cognitive mishmash. I certainly amn't trying anything! Anyway, I won't repeat what I already said 3 or 4 times... Any further repetitions are iterations. If "@ECHO OFF" controls what you see, what you see is the DOS of Config.sys & Autoexec.bat. But those shouldn't show when Logo=1 in MSDOS.sys. The MS logo hid that for me. Also shows the autoexec.bat file, which I can ECHO out but then it shows the c:\ECHO OFF That shouldn't be! It should be obscured behind the MS logo. Many things SHOULD BE in MS products. I just look3d at my MS-DOS 5 book... At the time of its printing, the MS slogan used to be "Making it all make sense[TM]". Right. Uh-huh. I'm certainly about to give up. I see System Commander may be involved too. I must leave that between you & MEB. I dumped System Manager. I thought I'd play around with Damn Small Linux (I ran it from a virtual drive and it works great) but what's the point. Sounded like it might alter the startup axis, which maybe we both need to review... http://cquirke.mvps.org/9x/startup.htm The startup axis. I'll bet the answer is here! That's what happened here. Are you sure you are set Logo=1 in MSDOS.sys? Can it be the 2nd Frenchwoman you see is the wallpaer? I already told you she's Canadian! And it's the same Windows logo.sys but for SOME reason the damn startup menu interrupts it every time! I thought for sure it was a dancing Frenchwoman. My Startup Menu shows up BEFORE my Logo.sys. MSDOS.sys is before the menu. IO.sys is before MSDOS.sys. MBR boot code is before IO.sys. BIOS is before MBR boot code. Could be System Commander has changed one of the 10 commandments for you-- as MEB seems to be saying. I can't say for sure! It ALWAYS happened this way with 98SE. For about 4 or so years I've had this computer. Could be the answer is on cquirke's site. The boot process has many variations & complexities. Let's look for something that could interrupt Logo.sys or display it a 2nd time. I got really fed up with wallpapers a long time ago, after collecting about a zillion of them... made some of my own too... Way too much free time... Now I don't even have a custom color scheme - I'm on plum now IIRC... I went to a lot of trouble to set up an all greyshade scheme and I have it saved, I can see all that. Now/then I switch Desktop Themes, but I hardly look much at the Desktop, really. Themes? No thanks. All right. As I said, I just was guessing the wallpaper could have been the 2nd image. but for some reason on my "new" "monitor", (LG 17", last new CRT I could find around here) it shows up in very faint shades of colors. I MAY have had the graphics set to High Color not 32bit, like I do now, but for now I don't see much point in checking if the greyscale scheme look OK now or not... Do I sound a little jaded? I don't know. And I don't really want to talk about monitors. This is the 3rd one about to go! An Envision EN5400e! I was so happy with it at first! Now, its buttons won't work-- even the on/off button must be pressed multiple times to work. And a week/so ago-- it was going on/off by itself while I was trying to post! I often find it has gone on by itself overnight! But my colors are fine. Sigh. Maybe I should use the F8 (IIRC) method for the startup menu... Tried it, the stupid Compaq boot mechanism gives me about 1/100 of a second to hit the F8 key (if I hit it too early it gets me into the BIOS, why i don't know...) so I had to go back to the bootmenu=1... Holding in the CTRL key during boot is superior to F8. The time limit is not a consideration that way. SNIP (a) "START, Run, MSConfig, Advanced button" (b) Uncheck "Enable Startup Menu" (c) Reboot -- I guess -- to enable MSConfig to complete, or check inside MSDOS.sys to see whether it's done. (d) Open MSDOS.sys & manually enter... BootMenu=0 BootMenuDelay=5 When set through MSConfig, you get 30 seconds. Can it be doing it each boot? I am unchecked in MSConfig & still get my menu (for 10 seconds). Sigh... I never even SAW MS Config until a few years ago when someone mentioned it. I can't find it in the Windows directory but when I typed the run command you gave above, it did show up. I think I prefer just editing ini files. Anyway, I saw it today for the 2nd time in my life, and I only remember that I DID see it one before but I don't actually remember seeing it, I just know I did. It's late. OK. But what about the Advanced button & that checkbox? Another thing-- don't forget to look below the comment lines in MSDOS.sys. A second BootMenuDelay may be hiding under there. I did set memory to 500 and we'll see what happens. I have a 3.1 program that won't run because there's not enough and too much memory at once. (It USED to of course, before all world's computers started plotting against me... So I installed Tiny XP, same thing. Maybe I'll just have to install win 3.11 on ANOTHER partition. Am I having fun yet? You're starting to stray to other matters. But keep at it. We probably both will learn from this. And MEB too! -- Thanks or Good Luck, There may be humor in this post, and, Naturally, you will not sue, Should things get worse after this, PCR |
#73
|
|||
|
|||
How to fix the bootup screen logo after running setup
Clicked SEND too soon. Here's the rest.
thanatoid wrote: "PCR" wrote in : SNIP You seem to have something extra. If I were willing to trust my memory this soon after it lied, I'd probably say I doubt I ever saw my BIOS post a message. For a while a while ago, it was beeping at me quickly thrice-- but that's gone away! Before that, it was beeping once or twice-- but I'm fairly sure that's gone too now! Beeps MAY indicate memory and other problems. Look on the HP site and find out what the beeps mean for your machine. I never found a description of beeps at that site, but found various ones elsewhere. But I haven't heard any beeps in a while. So, it didn't matter I never could quite figure which beep list applied to me. And it didn't come in the Compaq manuals, either, not that I've spotted. [BTW, I tried the BIOS logo flash utility... it has a variety of weird restrictions AFA the "image", and it took about twenty times and the furthest I got was "image palette error" or something, but I did it just like it's supposed to be, RLE compressed BMP and everything, 64KB or less... Who cares... You mean just to alter the Compaq logo screen? I can only guess on that. Looks like Zabkar is the one for that. Somewhere in the course of this thread, I came to believe you already had changed your Compaq logo to be Natashia. I see I was wrong, & you actually said it was the Win98Lite Logo.sys that was changed. Right, and BECAUSE OF YOU AND YOUR NAGGING I ended up trying to flash the stupid BIOS Logo, and the only thing left to try is to alter the original (the ONLY thing the damn program WOULD do was to save the original logo so I have it as a BMP file now and can try editing it instead of making a new BMP RLE file to their STUPID SPECS. Sounds like I'm lucky I didn't get that capability with my 7470! I hesitate to offer any advice. I'd rather Zabkar be blamed for the worse outcomes! :-). OK. But THAT should block out Config.sys & Autoexec.bat! (2) MS Startup Menu. Mine is set for 10 seconds in MSDOS.sys... BootMenu=1 BootMenuDelay=10 But hit ENTER, & it goes away immediately. This I knew, and in spite of getting old, 3 or 5 secs is enough for me. I didn't like it that short. Size doesn't matter. LOL! SNIP Right. But you see it with Logo=1? Yes. How many more times do I have to tell you? It's unbelievable! It pops into Natasha for 30 seconds. I've really given up on that. But ... maybe ... itemize the order in which you see the following-- both with the MS logo activated & with it de-activated. Perhaps also toggle whether the Startup Menu is activated. Is it possible to toggle System Commander? (1) BIOS logo Screen (2) System Commander screen (3) MS Startup Menu (4a) MS logo screen (Natasha) (4b) DOS lines of Config.sys/Autoexec.bat (5) Whatever else you see When you deactivate the MS logo-- do you see Natasha at all? And what the hell gave you ANY idea she is dancing? I know these days it appears mandatory for all dancers and backup singers to wear bikinis (for lack of a better term), and I did say she is wearing a white bikini, but please do not confuse a startup screen with the "virtual girl" annoyance. All Frenchwomen dance! (4) The Windows desktop & its wallpaper. R-Clk Desktop, Properties. Sure... but what is the point of mentioning it here? I became mixed up somehow. I thought you were seeing Natashia twice with (what might be) DOS in between. YES. I DO, but only when the Windows 98 (DOS shell) is starting... way past BIOS! Foof! I really don't see how Logo.sys would show twice. I still want to believe there is a second source of the image. I thought wallpaper might be the 2nd Natashia after your Natasha. Are you just trying to drive me crazy? Is that what this thread is about now? Compaq logo (which I know now isn't one-- IF there are two). No offense, but either you ARE trying to drive me crazy or we seem to have a slight cognitive mismatch... This is really beginning to remind me of some group therapy arguments I was part of in the good old days... I guess one of us could have a cognitive mishmash. I certainly amn't trying anything! Anyway, I won't repeat what I already said 3 or 4 times... Any further repetitions are iterations. If "@ECHO OFF" controls what you see, what you see is the DOS of Config.sys & Autoexec.bat. But those shouldn't show when Logo=1 in MSDOS.sys. The MS logo hid that for me. Also shows the autoexec.bat file, which I can ECHO out but then it shows the c:\ECHO OFF That shouldn't be! It should be obscured behind the MS logo. Many things SHOULD BE in MS products. I just look3d at my MS-DOS 5 book... At the time of its printing, the MS slogan used to be "Making it all make sense[TM]". Right. Uh-huh. I'm certainly about to give up. I see System Commander may be involved too. I must leave that between you & MEB. I dumped System Manager. I thought I'd play around with Damn Small Linux (I ran it from a virtual drive and it works great) but what's the point. Sounded like it might alter the startup axis, which maybe we both need to review... http://cquirke.mvps.org/9x/startup.htm The startup axis. I'll bet the answer is here! That's what happened here. Are you sure you are set Logo=1 in MSDOS.sys? Can it be the 2nd Frenchwoman you see is the wallpaer? I already told you she's Canadian! And it's the same Windows logo.sys but for SOME reason the damn startup menu interrupts it every time! I thought for sure it was a dancing Frenchwoman. My Startup Menu shows up BEFORE my Logo.sys. MSDOS.sys is before the menu. IO.sys is before MSDOS.sys. MBR boot code is before IO.sys. BIOS is before MBR boot code. Could be System Commander has changed one of the 10 commandments for you-- as MEB seems to be saying. I can't say for sure! It ALWAYS happened this way with 98SE. For about 4 or so years I've had this computer. Could be the answer is on cquirke's site. The boot process has many variations & complexities. Let's look for something that could interrupt Logo.sys or display it a 2nd time. I got really fed up with wallpapers a long time ago, after collecting about a zillion of them... made some of my own too... Way too much free time... Now I don't even have a custom color scheme - I'm on plum now IIRC... I went to a lot of trouble to set up an all greyshade scheme and I have it saved, I can see all that. Now/then I switch Desktop Themes, but I hardly look much at the Desktop, really. Themes? No thanks. All right. As I said, I just was guessing the wallpaper could have been the 2nd image. but for some reason on my "new" "monitor", (LG 17", last new CRT I could find around here) it shows up in very faint shades of colors. I MAY have had the graphics set to High Color not 32bit, like I do now, but for now I don't see much point in checking if the greyscale scheme look OK now or not... Do I sound a little jaded? I don't know. And I don't really want to talk about monitors. This is the 3rd one about to go! An Envision EN5400e! I was so happy with it at first! Now, its buttons won't work-- even the on/off button must be pressed multiple times to work. And a week/so ago-- it was going on/off by itself while I was trying to post! I often find it has gone on by itself overnight! But my colors are fine. Sigh. Maybe I should use the F8 (IIRC) method for the startup menu... Tried it, the stupid Compaq boot mechanism gives me about 1/100 of a second to hit the F8 key (if I hit it too early it gets me into the BIOS, why i don't know...) so I had to go back to the bootmenu=1... Holding in the CTRL key during boot is superior to F8. The time limit is not a consideration that way. SNIP (a) "START, Run, MSConfig, Advanced button" (b) Uncheck "Enable Startup Menu" (c) Reboot -- I guess -- to enable MSConfig to complete, or check inside MSDOS.sys to see whether it's done. (d) Open MSDOS.sys & manually enter... BootMenu=0 BootMenuDelay=5 When set through MSConfig, you get 30 seconds. Can it be doing it each boot? I am unchecked in MSConfig & still get my menu (for 10 seconds). Sigh... I never even SAW MS Config until a few years ago when someone mentioned it. I can't find it in the Windows directory but when I typed the run command you gave above, it did show up. I think I prefer just editing ini files. Anyway, I saw it today for the 2nd time in my life, and I only remember that I DID see it one before but I don't actually remember seeing it, I just know I did. It's late. OK. But what about the Advanced button & that checkbox? Another thing-- don't forget to look below the comment lines in MSDOS.sys. A second BootMenuDelay may be hiding under there. I did set memory to 500 and we'll see what happens. I have a 3.1 program that won't run because there's not enough and too much memory at once. (It USED to of course, before all world's computers started plotting against me... So I installed Tiny XP, same thing. Maybe I'll just have to install win 3.11 on ANOTHER partition. Am I having fun yet? You're starting to stray to other matters. But keep at it. We probably both will learn from this. And MEB too! -- Thanks or Good Luck, There may be humor in this post, and, Naturally, you will not sue, Should things get worse after this, PCR |
#74
|
|||
|
|||
How to fix the bootup screen logo after running setup
thanatoid wrote:
"PCR" wrote in : SNIP Franc Zabkar wrote: These are the modules in my BIOS: http://www.users.on.net/~fzabkar/L7S7A2/BIOS/MODULES.TX T I believe that the "Small OEM Logo" is the "Green" logo. That sounds like a possibility. And that is your startup screen? I have no way to look into my own BIOS. Those modules were extracted using AMI's amibcp.exe utility. Would it work for me? I don't think so. OK, thanks. Are you sure you've got your "c" & your "k" in the right places...?... What the hell is THAT supposed to mean? Mixed up "c's" & "k's" could be a sign of cognitive mishmash! - Franc Zabkar :-). After my 5 week vacation everyone on the Usenet appears top have been replaced by evil doppelgangers. I guess I am really going nuts - this time for good, let's hope. Enough is enough. LOL! -- Thanks or Good Luck, There may be humor in this post, and, Naturally, you will not sue, Should things get worse after this, PCR |
#75
|
|||
|
|||
How to fix the bootup screen logo after running setup
thanatoid wrote:
"PCR" wrote in : SNIP Franc Zabkar wrote: These are the modules in my BIOS: http://www.users.on.net/~fzabkar/L7S7A2/BIOS/MODULES.TX T I believe that the "Small OEM Logo" is the "Green" logo. That sounds like a possibility. And that is your startup screen? I have no way to look into my own BIOS. Those modules were extracted using AMI's amibcp.exe utility. Would it work for me? I don't think so. OK, thanks. Are you sure you've got your "c" & your "k" in the right places...?... What the hell is THAT supposed to mean? Mixed up "c's" & "k's" could be a sign of cognitive mishmash! - Franc Zabkar :-). After my 5 week vacation everyone on the Usenet appears top have been replaced by evil doppelgangers. I guess I am really going nuts - this time for good, let's hope. Enough is enough. LOL! -- Thanks or Good Luck, There may be humor in this post, and, Naturally, you will not sue, Should things get worse after this, PCR |
#76
|
|||
|
|||
How to fix the bootup screen logo after running setup
MEB wrote in
: Sorry must have glossed over, and missed this one... I wish I did that sometimes... answering - in my compact and economical manner - all these posts is driving me nuts... SNIP Now I am playing with WHY if I add this: [386Enh] MaxPhysPage=30000 limits the physical RAM used to 768 MB I /KNOW/. Why do you think I tried it? READ THE REST FIRST! 1 GB of ram in 98 needs system.ini to match this [or close, may take some tweaking]: [vcache] MaxFileCache=512000 OR games maybe MaxFileCache=131072 1 gig [386enh] MaxPhysPage=40000 You have 1 gig PLUS 128 [why I don't know] Well, the stupid SFF factor (who do we thank for this terminology the Japanese or the Chinese?) box has TWO memory slots, and it came with 2 128 sticks. I have 2 1 GB sticks but since I NEVER have less than 500MB free, I haven't bothered to put in BOTH 1 GB sticks, although I have tested them both and they work. But, since I hate to see an empty slot, I stuck in the 128. I know there was no point in it whatsoever, but it at least reduces the amount of junk I have to live with by one, albeit small, item - since it's INSIDE something else. ... send me the 128meg stick I need some more memory in this machine, and your not using it [with your present settings anyway]. BION, and this is what you would have found out if you had read carefully, I AM using it, at boot up I see 1048 once windows starts and only when crap loads up it goes down to 988 or something. Of course, there is NO difference between 988 free RAM or 732, or 347, or 249 for that matter. And you could play around with the setting ConservativeSwapFile with that amount of memory. With either setting I NEVER use /any/ of the swap file - both in 98SELite and in TinyXP. Or did you find Windows crashing above 768megs? Again, you should have read on, carefully... I said that when BOTH MaxPhysPage=30000 AND [vcache] MinFileCache=0 MaxFileCache=524288 chunksize=4096 are /not rem'd out/ in system.ini, it won't boot, I get a BSOD FEE. I ALSO found out that even though I rem'd out the MaxPhysPage=30000 line, stupid ****ing sysconfig put in a similar line except in hex, and that was why it wouldn't boot today - somehow I remembered what I did last night, booted into DOS and removed that line in XTGold. Now THERE's a program that works. You're running a non-standard 9X still, right? 98SE Lite. Good thing Terhune isn't here any more to complain how I am not running Windows AT ALL (although he never WOULD say what it *IS* that I am running). and my 98SE settings are [vcache] MinFileCache=0 MaxFileCache=524288 512meg cache with only 768meg per previous noted, yep you're going to crash. OK, all the "you didn't finish reading, read carefully crap above" - you should have read all the way to here and just said /that/. I DON'T understand why, but I seem to boot fine with the 1GB and 128MB sticks without that "MaxPhysPage=30000" line, and something tells me I would boot just fine with 2 1GB sticks as well, but I am waiting until I gather enough intestinal fortitude to put in a video capture card, since I really hate opening up the box (actually, one of the nice things about the EVO SFF is that it is tool-less except for screwing in card brackets, but I have a pretty complicated "furniture assortment" as my desk setup. chunksize=4096 Might also try: chunksize=2048 namecache=4096 directorycache=96 I have looked for what the hell "chunksize" is and there is NOTHING - I can not believe it. No Wikipedia, nothing on Google except the word appears occasionally, but I can NOT find a definition. I /think/ it may mean cluster size. My clusters /are/ 4 KB, FWIW. Can you please tell what the hell namecache=4096 and directorycache=96 will do? I obviously have a "clue" but I would like more than a clue, and in black and white. (irrelevant entries omitted in both) my system will /not/ boot into Windows but if I "," out the 30000 line, everything is fine. 1 1GB stick and 1 128 MB stick, whatever the hell that adds up to (I would think 1152 but who the hell knows... (4MB for AGP aperture even though I have no AGP card, it has to be set to SOMETHING...) Yeah, I use a PCI video card, so I also set mine at 4. Leaves some additional memory addressing space available. After all the crap I went through with an AGP card - I live in a place where "service" and "replacement" are largely /unfamiliar/ terminology; and which is also why I can't send you the 128MB sticks, since they would be stolen in the mail - I am just using the onboard Intel ExtremeGraphics. It's all I needed. I bought that stupid AGP graphics card after expressly telling myself all day on the way to the computer places "DO NOT BUY A GRAPHICS CARD, YOU DON'T NEED IT". -- Lots of theoretical butchers are alleged and other bloody eyes are suitable, but will Pam secure that? |
#77
|
|||
|
|||
How to fix the bootup screen logo after running setup
"PCR" wrote in
: thanatoid wrote: SNIP Beeps MAY indicate memory and other problems. Look on the HP site and find out what the beeps mean for your machine. I never found a description of beeps at that site, but found various ones elsewhere. But I haven't heard any beeps in a while. So, it didn't matter I never could quite figure which beep list applied to me. And it didn't come in the Compaq manuals, either, not that I've spotted. I never got manuals with mine, but you can DL everything from HP. When my first 1GB stick died, I got beeps to tell me what was wrong, but had to use my OTHER computer to find out what they meant. SNIP Sounds like I'm lucky I didn't get that capability with my 7470! I hesitate to offer any advice. I'd rather Zabkar be blamed for the worse outcomes! :-). I have seen and admired his posts for years, I do not believe he has EVER advised anything which could/would result in a disaster. OK. But THAT should block out Config.sys & Autoexec.bat! Like I said, Windows *should* run OK out of the box, too, etc. etc. etc. etc. SNIP Natasha. Are you just trying to drive me crazy? Is that what this thread is about now? Compaq logo (which I know now isn't one-- IF there are two). There are two - well, 4 - logos: the BIOS logo and 3 Windows logos - apparently more in XP but that's another subject and LET'S LEAVE IT THAT WAY. No offense, but either you ARE trying to drive me crazy or we seem to have a slight cognitive mismatch... This is really beginning to remind me of some group therapy arguments I was part of in the good old days... Anyway, I won't repeat what I already said 3 or 4 times... If "@ECHO OFF" controls what you see, what you see is the DOS of Config.sys & Autoexec.bat. But those shouldn't show when Logo=1 in MSDOS.sys. The MS logo hid that for me. Well, as I have said x times, the startup menu pops in between the SAME *1* logo.sys Natasha - you can NOT have 2 logo.sys's. Also shows the autoexec.bat file, which I can ECHO out but then it shows the c:\ECHO OFF Yes, isn't that just wonderful? That shouldn't be! It should be obscured behind the MS logo. Again, /many/ things SHOULD be. Many things SHOULD BE in MS products. I just look3d at my MS-DOS 5 book... At the time of its printing, the MS slogan used to be "Making it all make sense[TM]". Right. Uh-huh. I'm certainly about to give up. I see System Commander may be involved too. I must leave that between you & MEB. I dumped System Manager. I thought I'd play around with Damn Small Linux (I ran it from a virtual drive and it works great) but what's the point. That's what happened here. Are you sure you are set Logo=1 in MSDOS.sys? Can it be the 2nd Frenchwoman you see is the wallpaer? THERE ARE NO 2 FRENCHWOMEN, in fact there is not a SINGLE Frenchwoman, Natasha is Canadian. You should work in a mental hospital, you know... You could be on permanent call alert and when a patient is borderline, and they have just HAD it, they call you in, and after ten minutes with you s/he is WAY over the edge and ready to be "dealt with" properly. SNIP When set through MSConfig, you get 30 seconds. Can it be doing it each boot? I am unchecked in MSConfig & still get my menu (for 10 seconds). MSconfig sucks. That's what Edxor and ini files are for. -- Lots of theoretical butchers are alleged and other bloody eyes are suitable, but will Pam secure that? |
#78
|
|||
|
|||
How to fix the bootup screen logo after running setup
"PCR" wrote in
: thanatoid wrote: SNIP Beeps MAY indicate memory and other problems. Look on the HP site and find out what the beeps mean for your machine. I never found a description of beeps at that site, but found various ones elsewhere. But I haven't heard any beeps in a while. So, it didn't matter I never could quite figure which beep list applied to me. And it didn't come in the Compaq manuals, either, not that I've spotted. I never got manuals with mine, but you can DL everything from HP. When my first 1GB stick died, I got beeps to tell me what was wrong, but had to use my OTHER computer to find out what they meant. SNIP Sounds like I'm lucky I didn't get that capability with my 7470! I hesitate to offer any advice. I'd rather Zabkar be blamed for the worse outcomes! :-). I have seen and admired his posts for years, I do not believe he has EVER advised anything which could/would result in a disaster. OK. But THAT should block out Config.sys & Autoexec.bat! Like I said, Windows *should* run OK out of the box, too, etc. etc. etc. etc. SNIP Natasha. Are you just trying to drive me crazy? Is that what this thread is about now? Compaq logo (which I know now isn't one-- IF there are two). There are two - well, 4 - logos: the BIOS logo and 3 Windows logos - apparently more in XP but that's another subject and LET'S LEAVE IT THAT WAY. No offense, but either you ARE trying to drive me crazy or we seem to have a slight cognitive mismatch... This is really beginning to remind me of some group therapy arguments I was part of in the good old days... Anyway, I won't repeat what I already said 3 or 4 times... If "@ECHO OFF" controls what you see, what you see is the DOS of Config.sys & Autoexec.bat. But those shouldn't show when Logo=1 in MSDOS.sys. The MS logo hid that for me. Well, as I have said x times, the startup menu pops in between the SAME *1* logo.sys Natasha - you can NOT have 2 logo.sys's. Also shows the autoexec.bat file, which I can ECHO out but then it shows the c:\ECHO OFF Yes, isn't that just wonderful? That shouldn't be! It should be obscured behind the MS logo. Again, /many/ things SHOULD be. Many things SHOULD BE in MS products. I just look3d at my MS-DOS 5 book... At the time of its printing, the MS slogan used to be "Making it all make sense[TM]". Right. Uh-huh. I'm certainly about to give up. I see System Commander may be involved too. I must leave that between you & MEB. I dumped System Manager. I thought I'd play around with Damn Small Linux (I ran it from a virtual drive and it works great) but what's the point. That's what happened here. Are you sure you are set Logo=1 in MSDOS.sys? Can it be the 2nd Frenchwoman you see is the wallpaer? THERE ARE NO 2 FRENCHWOMEN, in fact there is not a SINGLE Frenchwoman, Natasha is Canadian. You should work in a mental hospital, you know... You could be on permanent call alert and when a patient is borderline, and they have just HAD it, they call you in, and after ten minutes with you s/he is WAY over the edge and ready to be "dealt with" properly. SNIP When set through MSConfig, you get 30 seconds. Can it be doing it each boot? I am unchecked in MSConfig & still get my menu (for 10 seconds). MSconfig sucks. That's what Edxor and ini files are for. -- Lots of theoretical butchers are alleged and other bloody eyes are suitable, but will Pam secure that? |
#79
|
|||
|
|||
How to fix the bootup screen logo after running setup
"PCR" wrote in
: Clicked SEND too soon. Here's the rest. I can't wait. SNIP Right. But you see it with Logo=1? Yes. How many more times do I have to tell you? It's unbelievable! It pops into Natasha for 30 seconds. I've really given up on that. Popping into Natasha? She let you? But ... maybe ... itemize the order in which you see the following-- both with the MS logo activated & with it de-activated. Perhaps also toggle whether the Startup Menu is activated. Is it possible to toggle System Commander? Now I KNOW you're screwing with my head. (1) BIOS logo Screen (2) System Commander screen (3) MS Startup Menu (4a) MS logo screen (Natasha) (4b) DOS lines of Config.sys/Autoexec.bat (5) Whatever else you see I'm pretty sure it can't be done. When you deactivate the MS logo-- do you see Natasha at all? This question does not merit a reply. SNIP Foof! I really don't see how Logo.sys would show twice. That's what I've been complaining about throughout this thread! I still want to believe there is a second source of the image. HOW COULD THERE BE? Show me a system with two identically-named files in the same directory! I thought wallpaper might be the 2nd Natashia after your Natasha. Are you just trying to drive me crazy? Is that what this thread is about now? Compaq logo (which I know now isn't one-- IF there are two). NO Natasha in Compaq, just Compaq. No offense, but either you ARE trying to drive me crazy or we seem to have a slight cognitive mismatch... This is really beginning to remind me of some group therapy arguments I was part of in the good old days... I guess one of us could have a cognitive mishmash. I certainly amn't trying anything! Right. Sounded like it might alter the startup axis, which maybe we both need to review... http://cquirke.mvps.org/9x/startup.htm The startup axis. I'll bet the answer is here! Now there is what MIGHT be of some use. Will check it out. Could be the answer is on cquirke's site. The boot process has many variations & complexities. Let's look for something that could interrupt Logo.sys or display it a 2nd time. Why don't we then. SNIP All right. As I said, I just was guessing the wallpaper could have been the 2nd image. HOW? The taskbar and the icons would be all over it after a few seconds! Plus, having the same image for startup logo AND wallpaper would be a little boring, /and/ confusing. Things are confusing /enough/! Holding in the CTRL key during boot is superior to F8. The time limit is not a consideration that way. Thank you for the tip. OK. But what about the Advanced button & that checkbox? Pure evil. See other reply about what it did, in hex to boot (so to speak). Another thing-- don't forget to look below the comment lines in MSDOS.sys. A second BootMenuDelay may be hiding under there. That is WHERE IT IS, not above. That's OTHER STUFF. Is there a mental hospital nearby where you apply for a well- paying on-call "consultant" job? You're starting to stray to other matters. But keep at it. We probably both will learn from this. And MEB too! See, again, you are doing what they used to call "crazymaking" in my group therapy group. -- Lots of theoretical butchers are alleged and other bloody eyes are suitable, but will Pam secure that? |
#80
|
|||
|
|||
How to fix the bootup screen logo after running setup
"PCR" wrote in
: Clicked SEND too soon. Here's the rest. I can't wait. SNIP Right. But you see it with Logo=1? Yes. How many more times do I have to tell you? It's unbelievable! It pops into Natasha for 30 seconds. I've really given up on that. Popping into Natasha? She let you? But ... maybe ... itemize the order in which you see the following-- both with the MS logo activated & with it de-activated. Perhaps also toggle whether the Startup Menu is activated. Is it possible to toggle System Commander? Now I KNOW you're screwing with my head. (1) BIOS logo Screen (2) System Commander screen (3) MS Startup Menu (4a) MS logo screen (Natasha) (4b) DOS lines of Config.sys/Autoexec.bat (5) Whatever else you see I'm pretty sure it can't be done. When you deactivate the MS logo-- do you see Natasha at all? This question does not merit a reply. SNIP Foof! I really don't see how Logo.sys would show twice. That's what I've been complaining about throughout this thread! I still want to believe there is a second source of the image. HOW COULD THERE BE? Show me a system with two identically-named files in the same directory! I thought wallpaper might be the 2nd Natashia after your Natasha. Are you just trying to drive me crazy? Is that what this thread is about now? Compaq logo (which I know now isn't one-- IF there are two). NO Natasha in Compaq, just Compaq. No offense, but either you ARE trying to drive me crazy or we seem to have a slight cognitive mismatch... This is really beginning to remind me of some group therapy arguments I was part of in the good old days... I guess one of us could have a cognitive mishmash. I certainly amn't trying anything! Right. Sounded like it might alter the startup axis, which maybe we both need to review... http://cquirke.mvps.org/9x/startup.htm The startup axis. I'll bet the answer is here! Now there is what MIGHT be of some use. Will check it out. Could be the answer is on cquirke's site. The boot process has many variations & complexities. Let's look for something that could interrupt Logo.sys or display it a 2nd time. Why don't we then. SNIP All right. As I said, I just was guessing the wallpaper could have been the 2nd image. HOW? The taskbar and the icons would be all over it after a few seconds! Plus, having the same image for startup logo AND wallpaper would be a little boring, /and/ confusing. Things are confusing /enough/! Holding in the CTRL key during boot is superior to F8. The time limit is not a consideration that way. Thank you for the tip. OK. But what about the Advanced button & that checkbox? Pure evil. See other reply about what it did, in hex to boot (so to speak). Another thing-- don't forget to look below the comment lines in MSDOS.sys. A second BootMenuDelay may be hiding under there. That is WHERE IT IS, not above. That's OTHER STUFF. Is there a mental hospital nearby where you apply for a well- paying on-call "consultant" job? You're starting to stray to other matters. But keep at it. We probably both will learn from this. And MEB too! See, again, you are doing what they used to call "crazymaking" in my group therapy group. -- Lots of theoretical butchers are alleged and other bloody eyes are suitable, but will Pam secure that? |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Black screen (no logo) before desktop shows | dk_ | General | 9 | March 29th 08 02:35 AM |
Bootup stops at logo screen | ms | General | 8 | February 14th 07 01:18 AM |
Stops at logo screen | ms | General | 3 | February 5th 07 03:00 PM |
Computer gets to logo screen & then blank screen with blinking cursor | Bill Hopkins | General | 0 | September 2nd 04 09:05 PM |