If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
|
Thread Tools | Display Modes |
#11
|
|||
|
|||
ps2/mouse and usb/kb. Guess you may have solve the mystery. Just checked the
Bios, 'Legacy usb support' was 'disabled' and now been "enabled" which now response and able to get to the desktop. will see how the mouse behave and try the F8 thing later. Need to be able to get the 'Window Updates' to obtain the latest patches and hope it can be resolve. Will post this progress in the other column "Windows Update/windows update general. Noel, Mart and Jack, many thanks for all your help.ts a great relief for now while I try to get the pc working in the way in which its suppose to work, thanks again. "Noel Paton" wrote: This is a PS/2 KB, right? If so, then I fear you may have motherboard problems. Can you try a USB Keyboard? - you'll need to adjust the BIOS if possible to 'Enable Legacy USB Support' -- Noel Paton (MS-MVP 2002-2005, Windows) Nil Carborundum Illegitemi http://www.btinternet.com/~winnoel/millsrpch.htm http://tinyurl.com/6oztj A Happy Xmas, and a Merry New Year to everyone! Please read http://dts-l.org/goodpost.htm on how to post messages to NG's "jim" wrote in message news Trying to F8 and hitting continously, and now showing 'previous resume fr hibernate failed. would u like to try again (Y/N)?" The kb does not response, Tsunami strike // what shall I do next, pls help, thanks "Jack E Martinelli" wrote: Aha! Test with a new known-good keyboard. The bad one may be interfering with the mouse. And your Error Code 22 is irrelevant: "Error Code 22: See MS KB 272291 - "ACPI IRQ Holder for PCI IRQ Steering" Problem Device Entry in System Information Tool" (http://support.microsoft.com?kbid=272291) where you will find it stated that what you are seeing is "by design". This problem is often the result of having changed the layout of your PCI cards or following the removal of a card. Forget about this "error" as it is unlikely to have an effect and is simply indicating that the place holder previously used is no longer required. -- Mike Maltby MS-MVP Sept 2003 -------- And clean up any duplicate mice, in the manner that Mart and Noel have advised. -- Jack E. Martinelli 2002-05 MS MVP for Shell/User / DTS Help us help you: http://www.dts-L.org/goodpost.htm http://www.microsoft.com/athome/secu...t/default.aspx Your cooperation is very appreciated. ------ "jim" wrote in message ... When I go to Msconfig/Advance, and check start up menu, the menu aappears but the kb does not response to my choice. What can I do? "jim" wrote: ME with ps2/mouse and usb/kb. Upon boot up, both are functioning but after a while the mouse hang. Any idea what causes these. Since we mouse cant move, how can I go to see the 'IRQ'. It will work ok upon reboot but the problem will appear again.(ME besides the usual driver for the graphic card, modem, it only have the DSL driver install.)Many thanks |
#12
|
|||
|
|||
Glad to see you appear to be having some success.
Please keep us informed. -- Jack E. Martinelli 2002-05 MS MVP for Shell/User / DTS Help us help you: http://www.dts-L.org/goodpost.htm http://www.microsoft.com/athome/secu...t/default.aspx Your cooperation is very appreciated. ------ "jim" wrote in message ... ps2/mouse and usb/kb. Guess you may have solve the mystery. Just checked the Bios, 'Legacy usb support' was 'disabled' and now been "enabled" which now response and able to get to the desktop. will see how the mouse behave and try the F8 thing later. Need to be able to get the 'Window Updates' to obtain the latest patches and hope it can be resolve. Will post this progress in the other column "Windows Update/windows update general. Noel, Mart and Jack, many thanks for all your help.ts a great relief for now while I try to get the pc working in the way in which its suppose to work, thanks again. "Noel Paton" wrote: This is a PS/2 KB, right? If so, then I fear you may have motherboard problems. Can you try a USB Keyboard? - you'll need to adjust the BIOS if possible to 'Enable Legacy USB Support' -- Noel Paton (MS-MVP 2002-2005, Windows) Nil Carborundum Illegitemi http://www.btinternet.com/~winnoel/millsrpch.htm http://tinyurl.com/6oztj A Happy Xmas, and a Merry New Year to everyone! Please read http://dts-l.org/goodpost.htm on how to post messages to NG's "jim" wrote in message news Trying to F8 and hitting continously, and now showing 'previous resume fr hibernate failed. would u like to try again (Y/N)?" The kb does not response, Tsunami strike // what shall I do next, pls help, thanks "Jack E Martinelli" wrote: Aha! Test with a new known-good keyboard. The bad one may be interfering with the mouse. And your Error Code 22 is irrelevant: "Error Code 22: See MS KB 272291 - "ACPI IRQ Holder for PCI IRQ Steering" Problem Device Entry in System Information Tool" (http://support.microsoft.com?kbid=272291) where you will find it stated that what you are seeing is "by design". This problem is often the result of having changed the layout of your PCI cards or following the removal of a card. Forget about this "error" as it is unlikely to have an effect and is simply indicating that the place holder previously used is no longer required. -- Mike Maltby MS-MVP Sept 2003 -------- And clean up any duplicate mice, in the manner that Mart and Noel have advised. -- Jack E. Martinelli 2002-05 MS MVP for Shell/User / DTS Help us help you: http://www.dts-L.org/goodpost.htm http://www.microsoft.com/athome/secu...t/default.aspx Your cooperation is very appreciated. ------ "jim" wrote in message ... When I go to Msconfig/Advance, and check start up menu, the menu aappears but the kb does not response to my choice. What can I do? "jim" wrote: ME with ps2/mouse and usb/kb. Upon boot up, both are functioning but after a while the mouse hang. Any idea what causes these. Since we mouse cant move, how can I go to see the 'IRQ'. It will work ok upon reboot but the problem will appear again.(ME besides the usual driver for the graphic card, modem, it only have the DSL driver install.)Many thanks |
#13
|
|||
|
|||
The mouse did not behave herself. By moving it, the window sometimes re-size
itself. Need to test a bit more. Many thanks "Jack E Martinelli" wrote: Glad to see you appear to be having some success. Please keep us informed. -- Jack E. Martinelli 2002-05 MS MVP for Shell/User / DTS Help us help you: http://www.dts-L.org/goodpost.htm http://www.microsoft.com/athome/secu...t/default.aspx Your cooperation is very appreciated. ------ "jim" wrote in message ... ps2/mouse and usb/kb. Guess you may have solve the mystery. Just checked the Bios, 'Legacy usb support' was 'disabled' and now been "enabled" which now response and able to get to the desktop. will see how the mouse behave and try the F8 thing later. Need to be able to get the 'Window Updates' to obtain the latest patches and hope it can be resolve. Will post this progress in the other column "Windows Update/windows update general. Noel, Mart and Jack, many thanks for all your help.ts a great relief for now while I try to get the pc working in the way in which its suppose to work, thanks again. "Noel Paton" wrote: This is a PS/2 KB, right? If so, then I fear you may have motherboard problems. Can you try a USB Keyboard? - you'll need to adjust the BIOS if possible to 'Enable Legacy USB Support' -- Noel Paton (MS-MVP 2002-2005, Windows) Nil Carborundum Illegitemi http://www.btinternet.com/~winnoel/millsrpch.htm http://tinyurl.com/6oztj A Happy Xmas, and a Merry New Year to everyone! Please read http://dts-l.org/goodpost.htm on how to post messages to NG's "jim" wrote in message news Trying to F8 and hitting continously, and now showing 'previous resume fr hibernate failed. would u like to try again (Y/N)?" The kb does not response, Tsunami strike // what shall I do next, pls help, thanks "Jack E Martinelli" wrote: Aha! Test with a new known-good keyboard. The bad one may be interfering with the mouse. And your Error Code 22 is irrelevant: "Error Code 22: See MS KB 272291 - "ACPI IRQ Holder for PCI IRQ Steering" Problem Device Entry in System Information Tool" (http://support.microsoft.com?kbid=272291) where you will find it stated that what you are seeing is "by design". This problem is often the result of having changed the layout of your PCI cards or following the removal of a card. Forget about this "error" as it is unlikely to have an effect and is simply indicating that the place holder previously used is no longer required. -- Mike Maltby MS-MVP Sept 2003 -------- And clean up any duplicate mice, in the manner that Mart and Noel have advised. -- Jack E. Martinelli 2002-05 MS MVP for Shell/User / DTS Help us help you: http://www.dts-L.org/goodpost.htm http://www.microsoft.com/athome/secu...t/default.aspx Your cooperation is very appreciated. ------ "jim" wrote in message ... When I go to Msconfig/Advance, and check start up menu, the menu aappears but the kb does not response to my choice. What can I do? "jim" wrote: ME with ps2/mouse and usb/kb. Upon boot up, both are functioning but after a while the mouse hang. Any idea what causes these. Since we mouse cant move, how can I go to see the 'IRQ'. It will work ok upon reboot but the problem will appear again.(ME besides the usual driver for the graphic card, modem, it only have the DSL driver install.)Many thanks |
|
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Win98 SE does not recognize PS/2 mouse on cold boot, only warm | Iudith | General | 0 | June 16th 04 12:50 PM |
Wheel Mouse won't work. Driver?? BTC M370 | Big Mac | General | 3 | June 10th 04 02:21 AM |
Wheel mouse PS2 won't work - driver?? BTC M370 | Big Mac | General | 3 | June 7th 04 09:35 PM |
HELP! Mouse suddenly won't work | dlee | Software & Applications | 1 | June 6th 04 06:03 PM |
HELP! Mouse suddenly won't work | dlee | Improving Performance | 1 | May 27th 04 04:45 PM |