If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Problems, crashed again.....
Hi Guys......
I have been heavily using this computer for 2 days looking up hotels in England (a lot of graphics).....so after the coincidental crash with Heirloom's attachment, did a Safe Mode scandisk and defrag......it did take quite a while.....90 minutes at least. Rebooted and decided to plug in my new card reader for the digital camera......got a few missing file or dll errors. I didn't write them down, but they were USB ones....like the fellow had when trying to load the software for his Pentax. So I clicked on Skip It.....got a couple more and cancelled it. I took the card reader out of the USB port.....and wham, the whole damn thing went dead on me!! Ron said the screen just went black.....no warning...nothing. Monitor and speaker lights were still on. Checked everything and could not get the CPU to come on. Finally it did after maybe 10 or 15 minutes. Seems to be working OK now. Icons were splattered all over the screen just like when I came out of Safe Mode....and Scandisk ran. Perhaps I tried putting the new card reader on too soon after the defrag? Has to be something to do with that. Only other thing I have put on in the past few days is the IconCache. Screen was freezing on me last night and had to reboot a couple of times. I put IconCache on because the icons were slow to 'fill in'. I never could write a short post.....sorry about that. But want to make sure this 'baby' is not having major problems. I probably need new video drivers......and I am about ready to upgrade to XP!!! Scared the hell out of me, it did. As usual.....I get the weird problems. Not about to try the card reader until tomorrow......and I did keep your post Mike about those USB files being in BASE2.Cab Files and the website to download the ones you need.....quote..... Alternatively you could visit http://www.usb-drivers.com/drivers/63/63237.htm and download usb-WinMe.exe which contains WinMe's usb related files. Extract the files you want and put them in windows\system32\drivers. It was asking that they be put in that System 32 folder. And for the WinME CD which I don't have. Sob......Figgs |
#2
|
|||
|
|||
A PS.......Problems, crashed again.....
On musing.....this computer seems fine and it must have been the card
reader....or something I did wrong with it. I will muse some more and try again tomorrow......but guess I will have to download those USB files. Or find them in the CAB files. Just thinking out loud, so to speak. Thanks....Figgs "Heather" wrote in message ... Hi Guys...... I have been heavily using this computer for 2 days looking up hotels in England (a lot of graphics).....so after the coincidental crash with Heirloom's attachment, did a Safe Mode scandisk and defrag......it did take quite a while.....90 minutes at least. Rebooted and decided to plug in my new card reader for the digital camera......got a few missing file or dll errors. I didn't write them down, but they were USB ones....like the fellow had when trying to load the software for his Pentax. So I clicked on Skip It.....got a couple more and cancelled it. I took the card reader out of the USB port.....and wham, the whole damn thing went dead on me!! Ron said the screen just went black.....no warning...nothing. Monitor and speaker lights were still on. Checked everything and could not get the CPU to come on. Finally it did after maybe 10 or 15 minutes. Seems to be working OK now. Icons were splattered all over the screen just like when I came out of Safe Mode....and Scandisk ran. Perhaps I tried putting the new card reader on too soon after the defrag? Has to be something to do with that. Only other thing I have put on in the past few days is the IconCache. Screen was freezing on me last night and had to reboot a couple of times. I put IconCache on because the icons were slow to 'fill in'. I never could write a short post.....sorry about that. But want to make sure this 'baby' is not having major problems. I probably need new video drivers......and I am about ready to upgrade to XP!!! Scared the hell out of me, it did. As usual.....I get the weird problems. Not about to try the card reader until tomorrow......and I did keep your post Mike about those USB files being in BASE2.Cab Files and the website to download the ones you need.....quote..... Alternatively you could visit http://www.usb-drivers.com/drivers/63/63237.htm and download usb-WinMe.exe which contains WinMe's usb related files. Extract the files you want and put them in windows\system32\drivers. It was asking that they be put in that System 32 folder. And for the WinME CD which I don't have. Sob......Figgs |
#3
|
|||
|
|||
Problems, crashed again.....
Hi Heather ;-)
"Heather" wrote in message ... Hi Guys...... I have been heavily using this computer for 2 days looking up hotels in England (a lot of graphics).....so after the coincidental crash with Heirloom's attachment, did a Safe Mode scandisk and defrag......it did take quite a while.....90 minutes at least. Rebooted and decided to plug in my new card reader for the digital camera......got a few missing file or dll errors. I didn't write them down, but they were USB ones....like the fellow had when trying to load the software for his Pentax. So I clicked on Skip It.....got a couple more and cancelled it. I took the card reader out of the USB port.....and wham, the whole damn thing went dead on me!! Ron said the screen just went black.....no warning...nothing. Monitor and speaker lights were still on. Checked everything and could not get the CPU to come on. Finally it did after maybe 10 or 15 minutes. Seems to be working OK now. Icons were splattered all over the screen just like when I came out of Safe Mode....and Scandisk ran. Perhaps I tried putting the new card reader on too soon after the defrag? Has to be something to do with that. Only other thing I have put on in the past few days is the IconCache. Screen was freezing on me last night and had to reboot a couple of times. I put IconCache on because the icons were slow to 'fill in'. I never could write a short post.....sorry about that. But want to make sure this 'baby' is not having major problems. I probably need new video drivers......and I am about ready to upgrade to XP!!! Scared the hell out of me, it did. As usual.....I get the weird problems. Not about to try the card reader until tomorrow......and I did keep your post Mike about those USB files being in BASE2.Cab Files and the website to download the ones you need.....quote..... Alternatively you could visit http://www.usb-drivers.com/drivers/63/63237.htm and download usb-WinMe.exe which contains WinMe's usb related files. Extract the files you want and put them in windows\system32\drivers. It was asking that they be put in that System 32 folder. And for the WinME CD which I don't have. Don't have a fix for the other, but, here's one for when the desktop icons go all over after you've been in Safe Mode. It really works a treat for me (seems I'm always needing to go to Safe Mode fairly often) and I got soooo tired of having to redo all those dang icons, I only have about 3 dz of 'em. And I just hate the ones that get lost below the bottom taskbar. So, now I just type in 'restoredesktop' in the Run window and Bingo! Every one of the 'lil darlin's is back where they belong. This was a goody Frank Saunders on the microsoft.public.windows.inetexplorer.ie6_outlooke xpress ng gave me to hush my puling and whining about my icons going all over in Safe Mood all the time. You may already have this, or something else that does the same thing, but, in case you need....they're down toward the bottom of the page. http://www.lynn3686.freeserve.co.uk/desktoprestore.html http://www.lynn3686.freeserve.co.uk/...toprestore.zip Jan |
#4
|
|||
|
|||
A PS.......Problems, crashed again.....
Heather wrote:
On musing.....this computer seems fine and it must have been the card reader....or something I did wrong with it. I will muse some more and try again tomorrow......but guess I will have to download those USB files. Or find them in the CAB files. Just thinking out loud, so to speak. s'OK, not like anybody ever reads these things, anyways. I never have any luck with USB devices so can't help ya there... but seems you might want to empty your TIF, or go whole hog and drop down to DOS and delete the TIF entirely (but do it in Windows first) as well as the Temp folder, WIN386.SWP and the RECYCLED bins, just to dust in the corners as well. Did you ever end up fresh installing Windows? Rick Thanks....Figgs "Heather" wrote in message ... Hi Guys...... I have been heavily using this computer for 2 days looking up hotels in England (a lot of graphics).....so after the coincidental crash with Heirloom's attachment, did a Safe Mode scandisk and defrag......it did take quite a while.....90 minutes at least. Rebooted and decided to plug in my new card reader for the digital camera......got a few missing file or dll errors. I didn't write them down, but they were USB ones....like the fellow had when trying to load the software for his Pentax. So I clicked on Skip It.....got a couple more and cancelled it. I took the card reader out of the USB port.....and wham, the whole damn thing went dead on me!! Ron said the screen just went black.....no warning...nothing. Monitor and speaker lights were still on. Checked everything and could not get the CPU to come on. Finally it did after maybe 10 or 15 minutes. Seems to be working OK now. Icons were splattered all over the screen just like when I came out of Safe Mode....and Scandisk ran. Perhaps I tried putting the new card reader on too soon after the defrag? Has to be something to do with that. Only other thing I have put on in the past few days is the IconCache. Screen was freezing on me last night and had to reboot a couple of times. I put IconCache on because the icons were slow to 'fill in'. I never could write a short post.....sorry about that. But want to make sure this 'baby' is not having major problems. I probably need new video drivers......and I am about ready to upgrade to XP!!! Scared the hell out of me, it did. As usual.....I get the weird problems. Not about to try the card reader until tomorrow......and I did keep your post Mike about those USB files being in BASE2.Cab Files and the website to download the ones you need.....quote..... Alternatively you could visit http://www.usb-drivers.com/drivers/63/63237.htm and download usb-WinMe.exe which contains WinMe's usb related files. Extract the files you want and put them in windows\system32\drivers. It was asking that they be put in that System 32 folder. And for the WinME CD which I don't have. Sob......Figgs |
#5
|
|||
|
|||
A PS.......Problems, crashed again.....
"Rick T" wrote in message ... Heather wrote: On musing.....this computer seems fine and it must have been the card reader....or something I did wrong with it. I will muse some more and try again tomorrow......but guess I will have to download those USB files. Or find them in the CAB files. Just thinking out loud, so to speak. s'OK, not like anybody ever reads these things, anyways. Smart a$$!!! (G) I never have any luck with USB devices so can't help ya there... but seems you might want to empty your TIF, or go whole hog and drop down to DOS and delete the TIF entirely (but do it in Windows first) as well as the Temp folder, WIN386.SWP and the RECYCLED bins, just to dust in the corners as well. OK......will try that. Not the DOS thing tho. I think I had just emptied my TIF....usually do it once or twice a day. TEMP is always emptied. Recycle has nothing in it. Dunno about the WIN386.SWP. Did you ever end up fresh installing Windows? No....never have. Not into formatting. Night.....Heather Rick Thanks....Figgs "Heather" wrote in message ... Hi Guys...... I have been heavily using this computer for 2 days looking up hotels in England (a lot of graphics).....so after the coincidental crash with Heirloom's attachment, did a Safe Mode scandisk and defrag......it did take quite a while.....90 minutes at least. Rebooted and decided to plug in my new card reader for the digital camera......got a few missing file or dll errors. I didn't write them down, but they were USB ones....like the fellow had when trying to load the software for his Pentax. So I clicked on Skip It.....got a couple more and cancelled it. I took the card reader out of the USB port.....and wham, the whole damn thing went dead on me!! Ron said the screen just went black.....no warning...nothing. Monitor and speaker lights were still on. Checked everything and could not get the CPU to come on. Finally it did after maybe 10 or 15 minutes. Seems to be working OK now. Icons were splattered all over the screen just like when I came out of Safe Mode....and Scandisk ran. Perhaps I tried putting the new card reader on too soon after the defrag? Has to be something to do with that. Only other thing I have put on in the past few days is the IconCache. Screen was freezing on me last night and had to reboot a couple of times. I put IconCache on because the icons were slow to 'fill in'. I never could write a short post.....sorry about that. But want to make sure this 'baby' is not having major problems. I probably need new video drivers......and I am about ready to upgrade to XP!!! Scared the hell out of me, it did. As usual.....I get the weird problems. Not about to try the card reader until tomorrow......and I did keep your post Mike about those USB files being in BASE2.Cab Files and the website to download the ones you need.....quote..... Alternatively you could visit http://www.usb-drivers.com/drivers/63/63237.htm and download usb-WinMe.exe which contains WinMe's usb related files. Extract the files you want and put them in windows\system32\drivers. It was asking that they be put in that System 32 folder. And for the WinME CD which I don't have. Sob......Figgs |
#6
|
|||
|
|||
Problems, crashed again.....
Thanks Jan......I will try that. I have a ton of them too......Frank is not
bad for an old guy, is he.......bwa ha ha. He will get me for that one. Btw.....I don't have "Active Desktop" on......is that for that? Or just an ordinary monitor. Seems to be working OK now......so had to be the damn card reader!! XX Heather "Jan Il" wrote in message ... Hi Heather ;-) "Heather" wrote in message ... Hi Guys...... Don't have a fix for the other, but, here's one for when the desktop icons go all over after you've been in Safe Mode. It really works a treat for me (seems I'm always needing to go to Safe Mode fairly often) and I got soooo tired of having to redo all those dang icons, I only have about 3 dz of 'em. And I just hate the ones that get lost below the bottom taskbar. So, now I just type in 'restoredesktop' in the Run window and Bingo! Every one of the 'lil darlin's is back where they belong. This was a goody Frank Saunders on the microsoft.public.windows.inetexplorer.ie6_outlooke xpress ng gave me to hush my puling and whining about my icons going all over in Safe Mood all the time. You may already have this, or something else that does the same thing, but, in case you need....they're down toward the bottom of the page. http://www.lynn3686.freeserve.co.uk/desktoprestore.html http://www.lynn3686.freeserve.co.uk/...toprestore.zip Jan |
#7
|
|||
|
|||
Problems, crashed again.....
Just wonder if you've tried a System Restore before you go running off to
far? It *might* save you some heartache. Mart "Heather" wrote in message ... Thanks Jan......I will try that. I have a ton of them too......Frank is not bad for an old guy, is he.......bwa ha ha. He will get me for that one. Btw.....I don't have "Active Desktop" on......is that for that? Or just an ordinary monitor. Seems to be working OK now......so had to be the damn card reader!! XX Heather "Jan Il" wrote in message ... Hi Heather ;-) "Heather" wrote in message ... Hi Guys...... Don't have a fix for the other, but, here's one for when the desktop icons go all over after you've been in Safe Mode. It really works a treat for me (seems I'm always needing to go to Safe Mode fairly often) and I got soooo tired of having to redo all those dang icons, I only have about 3 dz of 'em. And I just hate the ones that get lost below the bottom taskbar. So, now I just type in 'restoredesktop' in the Run window and Bingo! Every one of the 'lil darlin's is back where they belong. This was a goody Frank Saunders on the microsoft.public.windows.inetexplorer.ie6_outlooke xpress ng gave me to hush my puling and whining about my icons going all over in Safe Mood all the time. You may already have this, or something else that does the same thing, but, in case you need....they're down toward the bottom of the page. http://www.lynn3686.freeserve.co.uk/desktoprestore.html http://www.lynn3686.freeserve.co.uk/...toprestore.zip Jan |
#8
|
|||
|
|||
Problems, crashed again.....
Thanks Jan......I will try that. I have a ton of them too......Frank is
not bad for an old guy, is he.......bwa ha ha. He will get me for that one. Well...I won't tell him you said that....... grin Btw.....I don't have "Active Desktop" on......is that for that? Or just an ordinary monitor. I'm not sure, I've not used it for any other, mine is Active. It just says desktop. You make a copy of the current desktop arrangement by typing savedesktop in the Run window, and a copy is made like phfft! Then when you need to restore the desktop again, you just type restoredesktop in the Run window and the normal arrangement returns like phfft! Do I love it! You can download the program, and if it don't work for you, then just wax it. But, it will be good info to put in your 'Help' library in case some else can use it. Seems to be working OK now......so had to be the damn card reader!! Troubleshooting it the pits....especially when it causes all sorts of strange things to happen, that makes for even more troubleshooting. :-( Jan |
#9
|
|||
|
|||
Problems, crashed again.....
Iconoid, free from www.sillysot.com will 'remember' your icon arrangement
for you and restore their position. It also allows customization of icons and a bunch of other stuff. Very small, unobtrusive app. .........and it wasn't my attachment that crashed your machine!!!!!!!! Heirloom, old and icons are in place "Jan Il" wrote in message ... Hi Heather ;-) "Heather" wrote in message ... Hi Guys...... I have been heavily using this computer for 2 days looking up hotels in England (a lot of graphics).....so after the coincidental crash with Heirloom's attachment, did a Safe Mode scandisk and defrag......it did take quite a while.....90 minutes at least. Rebooted and decided to plug in my new card reader for the digital camera......got a few missing file or dll errors. I didn't write them down, but they were USB ones....like the fellow had when trying to load the software for his Pentax. So I clicked on Skip It.....got a couple more and cancelled it. I took the card reader out of the USB port.....and wham, the whole damn thing went dead on me!! Ron said the screen just went black.....no warning...nothing. Monitor and speaker lights were still on. Checked everything and could not get the CPU to come on. Finally it did after maybe 10 or 15 minutes. Seems to be working OK now. Icons were splattered all over the screen just like when I came out of Safe Mode....and Scandisk ran. Perhaps I tried putting the new card reader on too soon after the defrag? Has to be something to do with that. Only other thing I have put on in the past few days is the IconCache. Screen was freezing on me last night and had to reboot a couple of times. I put IconCache on because the icons were slow to 'fill in'. I never could write a short post.....sorry about that. But want to make sure this 'baby' is not having major problems. I probably need new video drivers......and I am about ready to upgrade to XP!!! Scared the hell out of me, it did. As usual.....I get the weird problems. Not about to try the card reader until tomorrow......and I did keep your post Mike about those USB files being in BASE2.Cab Files and the website to download the ones you need.....quote..... Alternatively you could visit http://www.usb-drivers.com/drivers/63/63237.htm and download usb-WinMe.exe which contains WinMe's usb related files. Extract the files you want and put them in windows\system32\drivers. It was asking that they be put in that System 32 folder. And for the WinME CD which I don't have. Don't have a fix for the other, but, here's one for when the desktop icons go all over after you've been in Safe Mode. It really works a treat for me (seems I'm always needing to go to Safe Mode fairly often) and I got soooo tired of having to redo all those dang icons, I only have about 3 dz of 'em. And I just hate the ones that get lost below the bottom taskbar. So, now I just type in 'restoredesktop' in the Run window and Bingo! Every one of the 'lil darlin's is back where they belong. This was a goody Frank Saunders on the microsoft.public.windows.inetexplorer.ie6_outlooke xpress ng gave me to hush my puling and whining about my icons going all over in Safe Mood all the time. You may already have this, or something else that does the same thing, but, in case you need....they're down toward the bottom of the page. http://www.lynn3686.freeserve.co.uk/desktoprestore.html http://www.lynn3686.freeserve.co.uk/...toprestore.zip Jan |
#10
|
|||
|
|||
Problems, crashed again.....
I am using a Sandisk ATA card reader, USB, with no probs.......didn't have
to load anything, Me recognized it. Heirloom, old and mine works "Heather" wrote in message ... Thanks Jan......I will try that. I have a ton of them too......Frank is not bad for an old guy, is he.......bwa ha ha. He will get me for that one. Btw.....I don't have "Active Desktop" on......is that for that? Or just an ordinary monitor. Seems to be working OK now......so had to be the damn card reader!! XX Heather "Jan Il" wrote in message ... Hi Heather ;-) "Heather" wrote in message ... Hi Guys...... Don't have a fix for the other, but, here's one for when the desktop icons go all over after you've been in Safe Mode. It really works a treat for me (seems I'm always needing to go to Safe Mode fairly often) and I got soooo tired of having to redo all those dang icons, I only have about 3 dz of 'em. And I just hate the ones that get lost below the bottom taskbar. So, now I just type in 'restoredesktop' in the Run window and Bingo! Every one of the 'lil darlin's is back where they belong. This was a goody Frank Saunders on the microsoft.public.windows.inetexplorer.ie6_outlooke xpress ng gave me to hush my puling and whining about my icons going all over in Safe Mood all the time. You may already have this, or something else that does the same thing, but, in case you need....they're down toward the bottom of the page. http://www.lynn3686.freeserve.co.uk/desktoprestore.html http://www.lynn3686.freeserve.co.uk/...toprestore.zip Jan |
|
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Ethernet Connection Problems with IBM 600 Laptop | Edward S. Baiz Jr. | Networking | 1 | July 6th 04 12:40 PM |
"My Computer" problems | John | General | 2 | July 1st 04 04:28 AM |
Windows Updates have caused problems | Alexis | Improving Performance | 0 | June 18th 04 02:36 AM |
Problems After Close IE | John Molta | Internet | 1 | June 7th 04 11:02 AM |
Lots of Problems all of a Sudden | Chris | Improving Performance | 1 | May 27th 04 10:00 AM |