A Windows 98 & ME forum. Win98banter

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » Win98banter forum » Windows 98 » Plug & Play
Site Map Home Authors List Search Today's Posts Mark Forums Read Web Partners

Problem installing USB drivers



 
 
Thread Tools Display Modes
  #1  
Old November 7th 04, 11:47 PM
Bill M.
external usenet poster
 
Posts: n/a
Default Problem installing USB drivers

I have Win 98SE and am trying to install Drivers for a USB Flash Disk.
Product name Rundisk has no support site . The included floppy has the
setup.ex and an inf file. I have completed the setup.ex and it tells me
drivers are loaded. I DID NOT do anything with the inf file. When the USB
Flash is plugged in (the first time) a New Device Wizzrd came up and could
not find the proper driver. On a second attempt at the wizzard did not appear
at all. I am obviously missing something (or the Floppy is a dud). Can
someone direct me to the correct method to instll Drivers ? Is the inf file
crucial to Windows finding the driver ? Any help would be great.

Bill M.
  #2  
Old November 9th 04, 02:30 PM
PattyL
external usenet poster
 
Posts: n/a
Default

Inf files can be very important but not necessarily. You don't mention the
name of the inf file and sometimes, it's purpose is simply to run the setup
that you say you ran manually. Othertimes, the inf file contains the
information that Windows needs to install the driver correctly.

Your device should have come with at least a readme type file with
instructions on installing the device. How each device is installed depends
a lot on how the manufacturer decided to write the installation files. In
some cases, you must run the installation before connecting the device and
in others, you must connect the device and then run the installation. With
USB devices, it's more common to install the device before connecting it.

Try booting into Safe mode, then go to Control Panel, System, Device Manager
and remove any devices that show up here with a ? or a red X, and any listed
under Other. Exit Device Manager and say "no" to rebooting and then Exit
and Shutdown Windows. After a few seconds, turn the system back on.
Right-click on the inf file and choose Edit to see what's in it. If it is
an Autorun.inf then it's probably not important but if it has driver
information, then you will want to point the installer at this disk when it
says it can't find the driver. Also check the disk to see if there are one
or more folders. The correct inf file might be in a folder and not in the
root.

Once you have determined where the required inf file is (if it exists), run
the setup again and when asked for the drivers, say Have Disk and then
browse to the inf file with the driver information.

This article might also be helpful:

General USB Troubleshooting in Windows 98, Windows 98 Second Edition, and
Windows Me
http://support.microsoft.com/?kbid=263218

PattyL




"Bill M." wrote in message
...
I have Win 98SE and am trying to install Drivers for a USB Flash Disk.
Product name Rundisk has no support site . The included floppy has the
setup.ex and an inf file. I have completed the setup.ex and it tells me
drivers are loaded. I DID NOT do anything with the inf file. When the USB
Flash is plugged in (the first time) a New Device Wizzrd came up and could
not find the proper driver. On a second attempt at the wizzard did not
appear
at all. I am obviously missing something (or the Floppy is a dud). Can
someone direct me to the correct method to instll Drivers ? Is the inf
file
crucial to Windows finding the driver ? Any help would be great.

Bill M.



  #3  
Old November 9th 04, 09:30 PM
Bill M.
external usenet poster
 
Posts: n/a
Default

Thank you PattyL

Your information was very helpfull. Unfortunately this very inexpensive
Flash Drive had no instructions in the Box; no Web site address and no READ
ME in the files. Not knowing all the various methods for installing Drivers
makes it hard for us novices. Your detailed explanation helped a lot and the
Flash Drive does work very nicely.

Glad there is a helping hand out there.



"PattyL" wrote:

Inf files can be very important but not necessarily. You don't mention the
name of the inf file and sometimes, it's purpose is simply to run the setup
that you say you ran manually. Othertimes, the inf file contains the
information that Windows needs to install the driver correctly.

Your device should have come with at least a readme type file with
instructions on installing the device. How each device is installed depends
a lot on how the manufacturer decided to write the installation files. In
some cases, you must run the installation before connecting the device and
in others, you must connect the device and then run the installation. With
USB devices, it's more common to install the device before connecting it.

Try booting into Safe mode, then go to Control Panel, System, Device Manager
and remove any devices that show up here with a ? or a red X, and any listed
under Other. Exit Device Manager and say "no" to rebooting and then Exit
and Shutdown Windows. After a few seconds, turn the system back on.
Right-click on the inf file and choose Edit to see what's in it. If it is
an Autorun.inf then it's probably not important but if it has driver
information, then you will want to point the installer at this disk when it
says it can't find the driver. Also check the disk to see if there are one
or more folders. The correct inf file might be in a folder and not in the
root.

Once you have determined where the required inf file is (if it exists), run
the setup again and when asked for the drivers, say Have Disk and then
browse to the inf file with the driver information.

This article might also be helpful:

General USB Troubleshooting in Windows 98, Windows 98 Second Edition, and
Windows Me
http://support.microsoft.com/?kbid=263218

PattyL




"Bill M." wrote in message
...
I have Win 98SE and am trying to install Drivers for a USB Flash Disk.
Product name Rundisk has no support site . The included floppy has the
setup.ex and an inf file. I have completed the setup.ex and it tells me
drivers are loaded. I DID NOT do anything with the inf file. When the USB
Flash is plugged in (the first time) a New Device Wizzrd came up and could
not find the proper driver. On a second attempt at the wizzard did not
appear
at all. I am obviously missing something (or the Floppy is a dud). Can
someone direct me to the correct method to instll Drivers ? Is the inf
file
crucial to Windows finding the driver ? Any help would be great.

Bill M.




  #4  
Old November 11th 04, 03:34 AM
PattyL
external usenet poster
 
Posts: n/a
Default

Awesome! Thanks for the feedback.

PattyL

"Bill M." wrote in message
news
Thank you PattyL

Your information was very helpfull. Unfortunately this very inexpensive
Flash Drive had no instructions in the Box; no Web site address and no
READ
ME in the files. Not knowing all the various methods for installing
Drivers
makes it hard for us novices. Your detailed explanation helped a lot and
the
Flash Drive does work very nicely.

Glad there is a helping hand out there.



"PattyL" wrote:

Inf files can be very important but not necessarily. You don't mention
the
name of the inf file and sometimes, it's purpose is simply to run the
setup
that you say you ran manually. Othertimes, the inf file contains the
information that Windows needs to install the driver correctly.

Your device should have come with at least a readme type file with
instructions on installing the device. How each device is installed
depends
a lot on how the manufacturer decided to write the installation files.
In
some cases, you must run the installation before connecting the device
and
in others, you must connect the device and then run the installation.
With
USB devices, it's more common to install the device before connecting it.

Try booting into Safe mode, then go to Control Panel, System, Device
Manager
and remove any devices that show up here with a ? or a red X, and any
listed
under Other. Exit Device Manager and say "no" to rebooting and then Exit
and Shutdown Windows. After a few seconds, turn the system back on.
Right-click on the inf file and choose Edit to see what's in it. If it
is
an Autorun.inf then it's probably not important but if it has driver
information, then you will want to point the installer at this disk when
it
says it can't find the driver. Also check the disk to see if there are
one
or more folders. The correct inf file might be in a folder and not in
the
root.

Once you have determined where the required inf file is (if it exists),
run
the setup again and when asked for the drivers, say Have Disk and then
browse to the inf file with the driver information.

This article might also be helpful:

General USB Troubleshooting in Windows 98, Windows 98 Second Edition, and
Windows Me
http://support.microsoft.com/?kbid=263218

PattyL




"Bill M." wrote in message
...
I have Win 98SE and am trying to install Drivers for a USB Flash Disk.
Product name Rundisk has no support site . The included floppy has the
setup.ex and an inf file. I have completed the setup.ex and it tells me
drivers are loaded. I DID NOT do anything with the inf file. When the
USB
Flash is plugged in (the first time) a New Device Wizzrd came up and
could
not find the proper driver. On a second attempt at the wizzard did not
appear
at all. I am obviously missing something (or the Floppy is a dud). Can
someone direct me to the correct method to instll Drivers ? Is the inf
file
crucial to Windows finding the driver ? Any help would be great.

Bill M.






  #5  
Old December 2nd 04, 09:00 AM
bctechnzl
external usenet poster
 
Posts: n/a
Default

It seems like I have one of these very same rundisk usb memory sticks, and
have yet to find a windows 98SE solution. Alas, ours did not come with a
floppy disk and can not find a suitable driver. What was the solution to
the problem here?
regards
Barry

  #6  
Old December 2nd 04, 11:13 PM
Bill M.
external usenet poster
 
Posts: n/a
Default

Hi Barry
Can you obtain the floppy disk from whoever sold you the unit ? It is the
only source of the driver that I know about. My search for the mfg website
came up empty.
My Flash Disk is P/N 701CRU0001 and 128 MB and I do have the floppy of the
driver used for Win 98/98SE. BUT, I am in Canada and suspect from your
handle you might be in nzl.
If all else fails for you, post your e-mail address (if you wish) and maybe
we can work something out. On the other hand it may be easier and cheaper to
buy another one.

Regards

"bctechnzl" wrote:

It seems like I have one of these very same rundisk usb memory sticks, and
have yet to find a windows 98SE solution. Alas, ours did not come with a
floppy disk and can not find a suitable driver. What was the solution to
the problem here?
regards
Barry


  #7  
Old January 18th 05, 08:03 AM
paul_adams777
external usenet poster
 
Posts: n/a
Default

I have found drivers at

http://www.irundisk.com/english

I haven't tried these (I used WinXP), but have passed what I downloaded on
to two of my customers who are using Win98.

If these don't work, please let me know. I have some that my supplier
gave me, but I can't post these here.

 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Folder Named [C:\Program] Opens Automatically on Start Ted Belben General 2 September 16th 04 11:39 PM
Strange Sound Problem James Andrew Wright General 0 August 21st 04 11:54 PM
Registry Problem while installing Win98 Second Edition sudhi Setup & Installation 1 July 15th 04 05:06 PM
Can NOt Drag Icons after a short time of use. Justin Baker Improving Performance 11 July 12th 04 07:35 PM
problem installing win98 SE zino Setup & Installation 1 June 23rd 04 06:56 AM


All times are GMT +1. The time now is 10:26 AM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 Win98banter.
The comments are property of their posters.