vnetsup.vxd,vredir.vxd, dfs.vxd files - SYSTEM INI

My friend's stand alone w98se pc upon boot up is showing :
'Cannot find a device file that may be needed to run Windows or a Windows
application.
The Windows Registry or SYSTEM.INI. refers to this device file but device
no longer wxists. If you delete this file on purpose, try uninstalling the
associated applicaton using its uninstall or setup prog. If you still want to
use the application associated with this device file, try re-installing the
appplication to replace the missing file.

1/ vnetsup.vxd, press a key to continue
2/ vredir.vxd
3/ dfs.vxd, press any key.

After hitting the last 'ENTER' KEY, this another error message occurs/appears
Windows Networking - "Unable to load the dynamic ;onl library msp32.dll. The
system cannot find the file specified.some of the features is not available
MICROSOFT nETWORK"

There is an 'ok' box for you to click and it will go to desktop.

Here is the SYSTEM.INI. file and which line shall he delete to get rid of
the above 1/2/3 error.

[boot]
oemfonts.fon=vgaoem.fon
shell=Explorer.exe
system.drv=system.drv
drivers=mmsystem.dll power.drv
user.exe=user.exe
gdi.exe=gdi.exe
sound.drv=mmsound.drv
dibeng.drv=dibeng.dll
comm.drv=comm.drv
mouse.drv=mouse.drv
keyboard.drv=keyboard.drv
*DisplayFallback=0
fonts.fon=vgasys.fon
fixedfon.fon=vgafix.fon
386Grabber=vgafull.3gr
display.drv=pnpdrvr.drv
SCRNSAVE.EXE=C:\WINDOWS\CHANNE~1.SCR

[keyboard]
keyboard.dll=
oemansi.bin=
subtype=
type=4

[boot.description]
system.drv=Standard PC
keyboard.typ=Standard 101/102-Key or Microsoft Natural Keyboard
mouse.drv=Standard mouse
aspect=100,96,96
display.drv=ATI 3D Rage Pro (atir3)

[386Enh]
ebios=*ebios
woafont=dosapp.fon
mouse=*vmouse, msmouse.vxd
device=*dynapage
device=*vcd
device=*vpd
device=*int13
device=*enable
keyboard=*vkd
display=*vdd,*vflatd

[NonWindowsApp]
TTInitialSizes=4 5 6 7 8 9 10 11 12 13 14 15 16 18 20 22

[power.drv]

[drivers]
wavemapper=*.drv
MSACM.imaadpcm=*.acm
MSACM.msadpcm=*.acm
wave=mmsystem.dll
midi=mmsystem.dll

[iccvid.drv]

[mciseq.drv]

[mci]
cdaudio=mcicda.drv
sequencer=mciseq.drv
waveaudio=mciwave.drv
avivideo=mciavi.drv
videodisc=mcipionr.drv
vcr=mcivisca.drv
MPEGVideo=mciqtz.drv
MPEGVideo2=mciqtz.drv

[vcache]

[Password Lists]
HELLO=C:\WINDOWS\HELLO.PWL
MAXIMUS VALENTINO=C:\WINDOWS\MAXIMUSV.PWL

[MSNP32]

[drivers32]
msacm.lhacm=lhacm.acm
VIDC.VDOM=vdowave.drv
MSACM.imaadpcm=imaadp32.acm
MSACM.msadpcm=msadp32.acm
MSACM.msgsm610=msgsm32.acm
msacm.msg711=msg711.acm
MSACM.trspch=tssoft32.acm
vidc.CVID=iccvid.dll
VIDC.IV31=ir32_32.dll
VIDC.IV32=ir32_32.dll
vidc.MSVC=msvidc32.dll
VIDC.MRLE=msrle32.dll
msacm.msg723=msg723.acm
vidc.M263=msh263.drv
vidc.M261=msh261.drv
VIDC.IV50=ir50_32.dll
msacm.iac2=C:\WINDOWS\SYSTEM\IAC25_32.AX
msacm.l3acm=C:\WINDOWS\SYSTEM\L3CODECA.ACM
msacm.sl_anet=sl_anet.acm
VIDC.WMV3=wmv9vcm.dll
msacm.msaudio1=msaud32.acm
msacm.voxacm160=vct3216.acm

[TTFontDimenCache]
0 4=2 4
0 5=3 5
0 6=4 6
0 7=4 7
0 8=5 8
0 9=5 9
0 10=6 10
0 11=7 11
0 12=7 12
0 13=8 13
0 14=8 14
0 15=9 15
0 16=10 16
0 18=11 18
0 20=12 20
0 22=13 22

.......END

Rather than reformat the last time round, can soneone help, thanks.

Hello!

"tim" wrote in message
...
1/ vnetsup.vxd, press a key to continue
2/ vredir.vxd
3/ dfs.vxd, press any key.

After hitting the last 'ENTER' KEY, this another error message
occurs/appears
Windows Networking - "Unable to load the dynamic ;onl library msp32.dll.
The
system cannot find the file specified.some of the features is not
available
MICROSOFT nETWORK"

(msp32.dll is probably msnp32.dll)
It seems that network system files were removed, but information remained
in system.ini. I recommend you to reinstall system files by using following
package, where updated versions are used:
More info he
http://www.petri.co.il/dsclient_for_win98_nt.htm

In fact more files are installed than neccessary, so after restart
uninstall package - dont worry - core files remain installed.
http://support.microsoft.com/default...b;en-us;323455

You can download latest DSClient.exe via HTTP
http://www.answers.vt.edu/ask4help/email/vtkb2683.htm
or via FTP:
http://www.catalyst.com/download/support.html

Servus, Roman

Still disgesting. Is there an easier way out?Thanks

"roman modic" wrote:

Hello!

"tim" wrote in message
...
1/ vnetsup.vxd, press a key to continue
2/ vredir.vxd
3/ dfs.vxd, press any key.

After hitting the last 'ENTER' KEY, this another error message
occurs/appears
Windows Networking - "Unable to load the dynamic ;onl library msp32.dll.
The
system cannot find the file specified.some of the features is not
available
MICROSOFT nETWORK"

(msp32.dll is probably msnp32.dll)
It seems that network system files were removed, but information remained
in system.ini. I recommend you to reinstall system files by using following
package, where updated versions are used:
More info he
http://www.petri.co.il/dsclient_for_win98_nt.htm

In fact more files are installed than neccessary, so after restart
uninstall package - dont worry - core files remain installed.
http://support.microsoft.com/default...b;en-us;323455

You can download latest DSClient.exe via HTTP
http://www.answers.vt.edu/ask4help/email/vtkb2683.htm
or via FTP:
http://www.catalyst.com/download/support.html

Servus, Roman

Tell your friend to use sfc and its "Extract one file..." option.

Ben

"tim" wrote in message ...
My friend's stand alone w98se pc upon boot up is showing :
'Cannot find a device file that may be needed to run Windows or a Windows
application.
The Windows Registry or SYSTEM.INI. refers to this device file but device
no longer wxists. If you delete this file on purpose, try uninstalling the
associated applicaton using its uninstall or setup prog. If you still want to
use the application associated with this device file, try re-installing the
appplication to replace the missing file.

1/ vnetsup.vxd, press a key to continue
2/ vredir.vxd
3/ dfs.vxd, press any key.

After hitting the last 'ENTER' KEY, this another error message occurs/appears
Windows Networking - "Unable to load the dynamic ;onl library msp32.dll. The
system cannot find the file specified.some of the features is not available
MICROSOFT nETWORK"

There is an 'ok' box for you to click and it will go to desktop.

Here is the SYSTEM.INI. file and which line shall he delete to get rid of
the above 1/2/3 error.

[boot]
oemfonts.fon=vgaoem.fon
shell=Explorer.exe
system.drv=system.drv
drivers=mmsystem.dll power.drv
user.exe=user.exe
gdi.exe=gdi.exe
sound.drv=mmsound.drv
dibeng.drv=dibeng.dll
comm.drv=comm.drv
mouse.drv=mouse.drv
keyboard.drv=keyboard.drv
*DisplayFallback=0
fonts.fon=vgasys.fon
fixedfon.fon=vgafix.fon
386Grabber=vgafull.3gr
display.drv=pnpdrvr.drv
SCRNSAVE.EXE=C:\WINDOWS\CHANNE~1.SCR

[keyboard]
keyboard.dll=
oemansi.bin=
subtype=
type=4

[boot.description]
system.drv=Standard PC
keyboard.typ=Standard 101/102-Key or Microsoft Natural Keyboard
mouse.drv=Standard mouse
aspect=100,96,96
display.drv=ATI 3D Rage Pro (atir3)

[386Enh]
ebios=*ebios
woafont=dosapp.fon
mouse=*vmouse, msmouse.vxd
device=*dynapage
device=*vcd
device=*vpd
device=*int13
device=*enable
keyboard=*vkd
display=*vdd,*vflatd

[NonWindowsApp]
TTInitialSizes=4 5 6 7 8 9 10 11 12 13 14 15 16 18 20 22

[power.drv]

[drivers]
wavemapper=*.drv
MSACM.imaadpcm=*.acm
MSACM.msadpcm=*.acm
wave=mmsystem.dll
midi=mmsystem.dll

[iccvid.drv]

[mciseq.drv]

[mci]
cdaudio=mcicda.drv
sequencer=mciseq.drv
waveaudio=mciwave.drv
avivideo=mciavi.drv
videodisc=mcipionr.drv
vcr=mcivisca.drv
MPEGVideo=mciqtz.drv
MPEGVideo2=mciqtz.drv

[vcache]

[Password Lists]
HELLO=C:\WINDOWS\HELLO.PWL
MAXIMUS VALENTINO=C:\WINDOWS\MAXIMUSV.PWL

[MSNP32]

[drivers32]
msacm.lhacm=lhacm.acm
VIDC.VDOM=vdowave.drv
MSACM.imaadpcm=imaadp32.acm
MSACM.msadpcm=msadp32.acm
MSACM.msgsm610=msgsm32.acm
msacm.msg711=msg711.acm
MSACM.trspch=tssoft32.acm
vidc.CVID=iccvid.dll
VIDC.IV31=ir32_32.dll
VIDC.IV32=ir32_32.dll
vidc.MSVC=msvidc32.dll
VIDC.MRLE=msrle32.dll
msacm.msg723=msg723.acm
vidc.M263=msh263.drv
vidc.M261=msh261.drv
VIDC.IV50=ir50_32.dll
msacm.iac2=C:\WINDOWS\SYSTEM\IAC25_32.AX
msacm.l3acm=C:\WINDOWS\SYSTEM\L3CODECA.ACM
msacm.sl_anet=sl_anet.acm
VIDC.WMV3=wmv9vcm.dll
msacm.msaudio1=msaud32.acm
msacm.voxacm160=vct3216.acm

[TTFontDimenCache]
0 4=2 4
0 5=3 5
0 6=4 6
0 7=4 7
0 8=5 8
0 9=5 9
0 10=6 10
0 11=7 11
0 12=7 12
0 13=8 13
0 14=8 14
0 15=9 15
0 16=10 16
0 18=11 18
0 20=12 20
0 22=13 22

......END

Rather than reformat the last time round, can soneone help, thanks.

http://support.microsoft.com/default...90&Product=w98
"Unable to Load the Dynamic Link Library" Error Message When You Install
Drivers or Utilities
(302590) - When you attempt to install device drivers or utilities on
your computer, you may receive the following error message: VNETSUP.VXD,
VREDIR.VXD, DFS.VXD... MSNP32.DLL - Unable to load the dynamic link
library: MSNP32.DLL the System cannot find the...

......Quote..........
SYMPTOMS
When you attempt to install device drivers or utilities on your
computer, you may receive the following error message:

VNETSUP.VXD, VREDIR.VXD, DFS.VXD... MSNP32.DLL - Unable to load the
dynamic link library: MSNP32.DLL the System cannot find the specified
file. Some, or all, of the following feature is not available: Microsoft
Network.

CAUSE
This behavior can occur if your networking components are configured
incorrectly.

RESOLUTION
To resolve this issue, remove and then reinstall Client for Microsoft
Networks. To do this, follow these steps:

1. Click Start, point to Settings, and then click Control Panel.
2. In Control Panel, double-click Network.
3. In the Network dialog box, select Client for Microsoft Networks, and
then click Remove.
4. In the Network dialog box, click OK, and then click Yes to restart
your computer.
5. Repeat steps 1 and 2.
6. In the Network dialog box, click Add.
7. In the Select Network Component Type dialog box, click Client, and
then click Add.
8. In the Select Network Client dialog box, click Microsoft under
Manufacturers.
9. Under Network Clients, select Client for Microsoft Networks, and then
click OK.
10. In the Network dialog box, click OK.
11. Click Yes to restart your computer.

NOTE: You may be asked to insert your network CD-ROM. If you do not have
a network CD-ROM, contact your network administrator for your specific
network settings.
......End quote..of Q302590....


--
Thanks or Good Luck,
There may be humor in this post, and,
Naturally, you will not sue,
should things get worse after this,
PCR

"tim" wrote in message
...
| My friend's stand alone w98se pc upon boot up is showing :
| 'Cannot find a device file that may be needed to run Windows or a
Windows
| application.
| The Windows Registry or SYSTEM.INI. refers to this device file but
device
| no longer wxists. If you delete this file on purpose, try uninstalling
the
| associated applicaton using its uninstall or setup prog. If you still
want to
| use the application associated with this device file, try
re-installing the
| appplication to replace the missing file.
|
| 1/ vnetsup.vxd, press a key to continue
| 2/ vredir.vxd
| 3/ dfs.vxd, press any key.
|
| After hitting the last 'ENTER' KEY, this another error message
occurs/appears
| Windows Networking - "Unable to load the dynamic ;onl library
msp32.dll. The
| system cannot find the file specified.some of the features is not
available
| MICROSOFT nETWORK"
|
| There is an 'ok' box for you to click and it will go to desktop.
|
| Here is the SYSTEM.INI. file and which line shall he delete to get rid
of
| the above 1/2/3 error.
|
| [boot]
| oemfonts.fon=vgaoem.fon
| shell=Explorer.exe
| system.drv=system.drv
| drivers=mmsystem.dll power.drv
| user.exe=user.exe
| gdi.exe=gdi.exe
| sound.drv=mmsound.drv
| dibeng.drv=dibeng.dll
| comm.drv=comm.drv
| mouse.drv=mouse.drv
| keyboard.drv=keyboard.drv
| *DisplayFallback=0
| fonts.fon=vgasys.fon
| fixedfon.fon=vgafix.fon
| 386Grabber=vgafull.3gr
| display.drv=pnpdrvr.drv
| SCRNSAVE.EXE=C:\WINDOWS\CHANNE~1.SCR
|
| [keyboard]
| keyboard.dll=
| oemansi.bin=
| subtype=
| type=4
|
| [boot.description]
| system.drv=Standard PC
| keyboard.typ=Standard 101/102-Key or Microsoft Natural Keyboard
| mouse.drv=Standard mouse
| aspect=100,96,96
| display.drv=ATI 3D Rage Pro (atir3)
|
| [386Enh]
| ebios=*ebios
| woafont=dosapp.fon
| mouse=*vmouse, msmouse.vxd
| device=*dynapage
| device=*vcd
| device=*vpd
| device=*int13
| device=*enable
| keyboard=*vkd
| display=*vdd,*vflatd
|
| [NonWindowsApp]
| TTInitialSizes=4 5 6 7 8 9 10 11 12 13 14 15 16 18 20 22
|
| [power.drv]
|
| [drivers]
| wavemapper=*.drv
| MSACM.imaadpcm=*.acm
| MSACM.msadpcm=*.acm
| wave=mmsystem.dll
| midi=mmsystem.dll
|
| [iccvid.drv]
|
| [mciseq.drv]
|
| [mci]
| cdaudio=mcicda.drv
| sequencer=mciseq.drv
| waveaudio=mciwave.drv
| avivideo=mciavi.drv
| videodisc=mcipionr.drv
| vcr=mcivisca.drv
| MPEGVideo=mciqtz.drv
| MPEGVideo2=mciqtz.drv
|
| [vcache]
|
| [Password Lists]
| HELLO=C:\WINDOWS\HELLO.PWL
| MAXIMUS VALENTINO=C:\WINDOWS\MAXIMUSV.PWL
|
| [MSNP32]
|
| [drivers32]
| msacm.lhacm=lhacm.acm
| VIDC.VDOM=vdowave.drv
| MSACM.imaadpcm=imaadp32.acm
| MSACM.msadpcm=msadp32.acm
| MSACM.msgsm610=msgsm32.acm
| msacm.msg711=msg711.acm
| MSACM.trspch=tssoft32.acm
| vidc.CVID=iccvid.dll
| VIDC.IV31=ir32_32.dll
| VIDC.IV32=ir32_32.dll
| vidc.MSVC=msvidc32.dll
| VIDC.MRLE=msrle32.dll
| msacm.msg723=msg723.acm
| vidc.M263=msh263.drv
| vidc.M261=msh261.drv
| VIDC.IV50=ir50_32.dll
| msacm.iac2=C:\WINDOWS\SYSTEM\IAC25_32.AX
| msacm.l3acm=C:\WINDOWS\SYSTEM\L3CODECA.ACM
| msacm.sl_anet=sl_anet.acm
| VIDC.WMV3=wmv9vcm.dll
| msacm.msaudio1=msaud32.acm
| msacm.voxacm160=vct3216.acm
|
| [TTFontDimenCache]
| 0 4=2 4
| 0 5=3 5
| 0 6=4 6
| 0 7=4 7
| 0 8=5 8
| 0 9=5 9
| 0 10=6 10
| 0 11=7 11
| 0 12=7 12
| 0 13=8 13
| 0 14=8 14
| 0 15=9 15
| 0 16=10 16
| 0 18=11 18
| 0 20=12 20
| 0 22=13 22
|
| ......END
|
| Rather than reformat the last time round, can soneone help, thanks.
|

Error Message: Cannot Find a Device File That May Be Needed to Run Windows
http://support.microsoft.com/default...;en-us;Q132008

Err Msg: Cannot Find a Device File That May Be Needed to Run...
http://support.microsoft.com/default...;en-us;Q166832

�Unable to Load the Dynamic Link Library� Error Message When You Install Drivers
or Utilities
http://support.microsoft.com/default...;EN-US;Q302590

--

Brian A. Sesko { MS MVP_Shell/User }
Conflicts start where information lacks.
http://basconotw.mvps.org/

Suggested posting do's/don'ts: http://www.dts-l.org/goodpost.htm
How to ask a question: http://support.microsoft.com/kb/555375




"tim" wrote in message
...
My friend's stand alone w98se pc upon boot up is showing :
'Cannot find a device file that may be needed to run Windows or a Windows
application.
The Windows Registry or SYSTEM.INI. refers to this device file but device
no longer wxists. If you delete this file on purpose, try uninstalling the
associated applicaton using its uninstall or setup prog. If you still want to
use the application associated with this device file, try re-installing the
appplication to replace the missing file.

1/ vnetsup.vxd, press a key to continue
2/ vredir.vxd
3/ dfs.vxd, press any key.

After hitting the last 'ENTER' KEY, this another error message occurs/appears
Windows Networking - "Unable to load the dynamic ;onl library msp32.dll. The
system cannot find the file specified.some of the features is not available
MICROSOFT nETWORK"

There is an 'ok' box for you to click and it will go to desktop.

Here is the SYSTEM.INI. file and which line shall he delete to get rid of
the above 1/2/3 error.

[boot]
oemfonts.fon=vgaoem.fon
shell=Explorer.exe
system.drv=system.drv
drivers=mmsystem.dll power.drv
user.exe=user.exe
gdi.exe=gdi.exe
sound.drv=mmsound.drv
dibeng.drv=dibeng.dll
comm.drv=comm.drv
mouse.drv=mouse.drv
keyboard.drv=keyboard.drv
*DisplayFallback=0
fonts.fon=vgasys.fon
fixedfon.fon=vgafix.fon
386Grabber=vgafull.3gr
display.drv=pnpdrvr.drv
SCRNSAVE.EXE=C:\WINDOWS\CHANNE~1.SCR

[keyboard]
keyboard.dll=
oemansi.bin=
subtype=
type=4

[boot.description]
system.drv=Standard PC
keyboard.typ=Standard 101/102-Key or Microsoft Natural Keyboard
mouse.drv=Standard mouse
aspect=100,96,96
display.drv=ATI 3D Rage Pro (atir3)

[386Enh]
ebios=*ebios
woafont=dosapp.fon
mouse=*vmouse, msmouse.vxd
device=*dynapage
device=*vcd
device=*vpd
device=*int13
device=*enable
keyboard=*vkd
display=*vdd,*vflatd

[NonWindowsApp]
TTInitialSizes=4 5 6 7 8 9 10 11 12 13 14 15 16 18 20 22

[power.drv]

[drivers]
wavemapper=*.drv
MSACM.imaadpcm=*.acm
MSACM.msadpcm=*.acm
wave=mmsystem.dll
midi=mmsystem.dll

[iccvid.drv]

[mciseq.drv]

[mci]
cdaudio=mcicda.drv
sequencer=mciseq.drv
waveaudio=mciwave.drv
avivideo=mciavi.drv
videodisc=mcipionr.drv
vcr=mcivisca.drv
MPEGVideo=mciqtz.drv
MPEGVideo2=mciqtz.drv

[vcache]

[Password Lists]
HELLO=C:\WINDOWS\HELLO.PWL
MAXIMUS VALENTINO=C:\WINDOWS\MAXIMUSV.PWL

[MSNP32]

[drivers32]
msacm.lhacm=lhacm.acm
VIDC.VDOM=vdowave.drv
MSACM.imaadpcm=imaadp32.acm
MSACM.msadpcm=msadp32.acm
MSACM.msgsm610=msgsm32.acm
msacm.msg711=msg711.acm
MSACM.trspch=tssoft32.acm
vidc.CVID=iccvid.dll
VIDC.IV31=ir32_32.dll
VIDC.IV32=ir32_32.dll
vidc.MSVC=msvidc32.dll
VIDC.MRLE=msrle32.dll
msacm.msg723=msg723.acm
vidc.M263=msh263.drv
vidc.M261=msh261.drv
VIDC.IV50=ir50_32.dll
msacm.iac2=C:\WINDOWS\SYSTEM\IAC25_32.AX
msacm.l3acm=C:\WINDOWS\SYSTEM\L3CODECA.ACM
msacm.sl_anet=sl_anet.acm
VIDC.WMV3=wmv9vcm.dll
msacm.msaudio1=msaud32.acm
msacm.voxacm160=vct3216.acm

[TTFontDimenCache]
0 4=2 4
0 5=3 5
0 6=4 6
0 7=4 7
0 8=5 8
0 9=5 9
0 10=6 10
0 11=7 11
0 12=7 12
0 13=8 13
0 14=8 14
0 15=9 15
0 16=10 16
0 18=11 18
0 20=12 20
0 22=13 22

......END

Rather than reformat the last time round, can soneone help, thanks.

| �Unable to Load the Dynamic Link Library�

You have had a relapse of sickly single quotes, Brian A!


--
Thanks or Good Luck,
There may be humor in this post, and,
Naturally, you will not sue,
should things get worse after this,
PCR

"Brian A." gonefish'n@afarawaylake wrote in message
...
| Error Message: Cannot Find a Device File That May Be Needed to Run
Windows
| http://support.microsoft.com/default...;en-us;Q132008
|
| Err Msg: Cannot Find a Device File That May Be Needed to Run...
| http://support.microsoft.com/default...;en-us;Q166832
|
| �Unable to Load the Dynamic Link Library� Error Message When You
Install Drivers
| or Utilities
| http://support.microsoft.com/default...;EN-US;Q302590
|
| --
|
| Brian A. Sesko { MS MVP_Shell/User }
| Conflicts start where information lacks.
| http://basconotw.mvps.org/
|
| Suggested posting do's/don'ts: http://www.dts-l.org/goodpost.htm
| How to ask a question: http://support.microsoft.com/kb/555375
|
|
|
|
| "tim" wrote in message
| ...
| My friend's stand alone w98se pc upon boot up is showing :
| 'Cannot find a device file that may be needed to run Windows or a
Windows
| application.
| The Windows Registry or SYSTEM.INI. refers to this device file but
device
| no longer wxists. If you delete this file on purpose, try
uninstalling the
| associated applicaton using its uninstall or setup prog. If you
still want to
| use the application associated with this device file, try
re-installing the
| appplication to replace the missing file.
|
| 1/ vnetsup.vxd, press a key to continue
| 2/ vredir.vxd
| 3/ dfs.vxd, press any key.
|
| After hitting the last 'ENTER' KEY, this another error message
occurs/appears
| Windows Networking - "Unable to load the dynamic ;onl library
msp32.dll. The
| system cannot find the file specified.some of the features is not
available
| MICROSOFT nETWORK"
|
| There is an 'ok' box for you to click and it will go to desktop.
|
| Here is the SYSTEM.INI. file and which line shall he delete to get
rid of
| the above 1/2/3 error.
|
| [boot]
| oemfonts.fon=vgaoem.fon
| shell=Explorer.exe
| system.drv=system.drv
| drivers=mmsystem.dll power.drv
| user.exe=user.exe
| gdi.exe=gdi.exe
| sound.drv=mmsound.drv
| dibeng.drv=dibeng.dll
| comm.drv=comm.drv
| mouse.drv=mouse.drv
| keyboard.drv=keyboard.drv
| *DisplayFallback=0
| fonts.fon=vgasys.fon
| fixedfon.fon=vgafix.fon
| 386Grabber=vgafull.3gr
| display.drv=pnpdrvr.drv
| SCRNSAVE.EXE=C:\WINDOWS\CHANNE~1.SCR
|
| [keyboard]
| keyboard.dll=
| oemansi.bin=
| subtype=
| type=4
|
| [boot.description]
| system.drv=Standard PC
| keyboard.typ=Standard 101/102-Key or Microsoft Natural Keyboard
| mouse.drv=Standard mouse
| aspect=100,96,96
| display.drv=ATI 3D Rage Pro (atir3)
|
| [386Enh]
| ebios=*ebios
| woafont=dosapp.fon
| mouse=*vmouse, msmouse.vxd
| device=*dynapage
| device=*vcd
| device=*vpd
| device=*int13
| device=*enable
| keyboard=*vkd
| display=*vdd,*vflatd
|
| [NonWindowsApp]
| TTInitialSizes=4 5 6 7 8 9 10 11 12 13 14 15 16 18 20 22
|
| [power.drv]
|
| [drivers]
| wavemapper=*.drv
| MSACM.imaadpcm=*.acm
| MSACM.msadpcm=*.acm
| wave=mmsystem.dll
| midi=mmsystem.dll
|
| [iccvid.drv]
|
| [mciseq.drv]
|
| [mci]
| cdaudio=mcicda.drv
| sequencer=mciseq.drv
| waveaudio=mciwave.drv
| avivideo=mciavi.drv
| videodisc=mcipionr.drv
| vcr=mcivisca.drv
| MPEGVideo=mciqtz.drv
| MPEGVideo2=mciqtz.drv
|
| [vcache]
|
| [Password Lists]
| HELLO=C:\WINDOWS\HELLO.PWL
| MAXIMUS VALENTINO=C:\WINDOWS\MAXIMUSV.PWL
|
| [MSNP32]
|
| [drivers32]
| msacm.lhacm=lhacm.acm
| VIDC.VDOM=vdowave.drv
| MSACM.imaadpcm=imaadp32.acm
| MSACM.msadpcm=msadp32.acm
| MSACM.msgsm610=msgsm32.acm
| msacm.msg711=msg711.acm
| MSACM.trspch=tssoft32.acm
| vidc.CVID=iccvid.dll
| VIDC.IV31=ir32_32.dll
| VIDC.IV32=ir32_32.dll
| vidc.MSVC=msvidc32.dll
| VIDC.MRLE=msrle32.dll
| msacm.msg723=msg723.acm
| vidc.M263=msh263.drv
| vidc.M261=msh261.drv
| VIDC.IV50=ir50_32.dll
| msacm.iac2=C:\WINDOWS\SYSTEM\IAC25_32.AX
| msacm.l3acm=C:\WINDOWS\SYSTEM\L3CODECA.ACM
| msacm.sl_anet=sl_anet.acm
| VIDC.WMV3=wmv9vcm.dll
| msacm.msaudio1=msaud32.acm
| msacm.voxacm160=vct3216.acm
|
| [TTFontDimenCache]
| 0 4=2 4
| 0 5=3 5
| 0 6=4 6
| 0 7=4 7
| 0 8=5 8
| 0 9=5 9
| 0 10=6 10
| 0 11=7 11
| 0 12=7 12
| 0 13=8 13
| 0 14=8 14
| 0 15=9 15
| 0 16=10 16
| 0 18=11 18
| 0 20=12 20
| 0 22=13 22
|
| ......END
|
| Rather than reformat the last time round, can soneone help, thanks.
|
|