Still Need Help - Display screen size suddenly shrunk a little

I have just discovered something that makes me think my problem is not
in the KDS monitor.

I have two other machines, on with WXP, the other with W98SE. Both
machines show a FULL SCREEN display on this same KDS VS-195E monitor.

Therefore my problem is unique to my new ECS L7VMM3 (MOBO)
Athlon-Duron machine which has W98SE on it.

So, what setting (BIOS or otherwise) should I look for to fix my
problem?

Thanks, and please be nice.

On Wed, 09 Jun 2004 10:22:35 GMT, wrote:

I have just discovered something that makes me think my problem is not
in the KDS monitor.

I have two other machines, on with WXP, the other with W98SE. Both
machines show a FULL SCREEN display on this same KDS VS-195E monitor.

Therefore my problem is unique to my new ECS L7VMM3 (MOBO)
Athlon-Duron machine which has W98SE on it.

So, what setting (BIOS or otherwise) should I look for to fix my
problem?

Thanks, and please be nice.

The Display Properties page in Windows should have refresh rate and
hopefully image size settings. If you're using a WinXP bundled driver or
another "lite" version of the driver which doesn't include adjustments for
this (image size) then you might find the full feature driver at chipset
(northbridge, Via or Sis?) or motherboard manufacturer's website, or
possibly on the CD that came with the motherboard.

You still need to adjust the monitor using the buttons on the monitor cabinet, when
that computer is connected. Every computer will display differently on a monitor.
--
Glen Ventura, MS MVP W95/98 Systems
http://dts-l.org/goodpost.htm

wrote in message ...
I have just discovered something that makes me think my problem is not
in the KDS monitor.

I have two other machines, on with WXP, the other with W98SE. Both
machines show a FULL SCREEN display on this same KDS VS-195E monitor.

Therefore my problem is unique to my new ECS L7VMM3 (MOBO)
Athlon-Duron machine which has W98SE on it.

So, what setting (BIOS or otherwise) should I look for to fix my
problem?

Thanks, and please be nice.

wrote in message
...
I have just discovered something that makes me think my problem is not
in the KDS monitor.

The control on the front... Pushing the left side should degauss the screen
(makes the whole thing shake). Pushing the right side should give you a menu
to make adjustments.

If these aren't working then your monitor is broken and any adjustments you
want to make will have to be done in the Display Properties in Windows.
There is nothing you can do outside of Windows to make adjustments except
fix/replace the monitor.

Most monitors are designed to have a 1/4" dark gap at the sides of the
monitors anyhow.

On Wed, 09 Jun 2004 12:39:22 GMT, "Noozer"
wrote:

The control on the front... Pushing the left side should degauss the
screen
(makes the whole thing shake). Pushing the right side should give you
a menu
to make adjustments.

If these aren't working then your monitor is broken and any adjustments you
want to make will have to be done in the Display Properties in Windows.
There is nothing you can do outside of Windows to make adjustments except
fix/replace the monitor.

Most monitors are designed to have a 1/4" dark gap at the sides of the
monitors anyhow.



Well I agree that the monitor must be broken - at least the control
knob part.

The 1/4" is really about 1/2", now that I look a little closer.

Thanks for info on Monitor control.

WeeW

It sounds like your video card may be failing.

--
DaveW



wrote in message
...
I have just discovered something that makes me think my problem is not
in the KDS monitor.

I have two other machines, on with WXP, the other with W98SE. Both
machines show a FULL SCREEN display on this same KDS VS-195E monitor.

Therefore my problem is unique to my new ECS L7VMM3 (MOBO)
Athlon-Duron machine which has W98SE on it.

So, what setting (BIOS or otherwise) should I look for to fix my
problem?

Thanks, and please be nice.

I had a HP comp running win98se that I had downloaded updated video drivers
for. The screen then left a three inch 'frame' of black all around. I got
into the advanced display properties and it said that my CRT monitor was an
LCD monitor. After I changed that everything was fine. Hope it helps.

~Patty


wrote in message
...
I have just discovered something that makes me think my problem is not
in the KDS monitor.

I have two other machines, on with WXP, the other with W98SE. Both
machines show a FULL SCREEN display on this same KDS VS-195E monitor.

Therefore my problem is unique to my new ECS L7VMM3 (MOBO)
Athlon-Duron machine which has W98SE on it.

So, what setting (BIOS or otherwise) should I look for to fix my
problem?

Thanks, and please be nice.




-----= Posted via Newsfeeds.Com, Uncensored Usenet News =-----
http://www.newsfeeds.com - The #1 Newsgroup Service in the World!
-----== Over 100,000 Newsgroups - 19 Different Servers! =-----