If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Error Code 28 and Error 2
I have this error28 on my sound, does anyone know what it
means. On my dsl i have error2 and can anyone help me fix these problems |
#2
|
|||
|
|||
Error Code 28 and Error 2
Where are you seeing these error codes? - in System Information and/or
Device Manager? If so, then ... Code 2 Depending on which device is failing, you may see either of two different messages. This code means that the device loader (DevLoader) did not load a device. When this device is a Root Bus DevLoader (for example, ISAPNP, PCI, or BIOS), the following message is displayed Windows could not load the driver for this device because the computer is reporting two type bus types. (Code 2) Contact your computer manufacturer to get an updated BIOS for your computer. where type is ISAPNP, PCI, BIOS, EISA, or ACPI. Solution button: None When the device is not a root bus DevLoader, the following message is displayed The type device loader(s) for this device could not load the device driver. (Code 2) To fix this, click Update Driver to update the device driver. where type is the DevLoader such as FLOP, ESDI, SCSI, and so on. Solution button: Update Driver In addition to following the recommended solution, try removing the device from Device Manager, and then running the Add New Hardware wizard. Code 28 The drivers for this device are not installed (Code 28). To reinstall the drivers for this device, click Reinstall Driver Solution button: Reinstall Driver This code means the device was not installed completely. To resolve this issue, follow the recommended solution. If that does not work, try removing the device from Device Manager and using the Add New Hardware wizard to redetect it. You may need to obtain updated drivers if the error still occurs. (from KB125174) HTH -- Noel Paton (MS-MVP 2002-2004, Win9x) Nil Carborundum Illegitemi http://www.btinternet.com/~winnoel/millsrpch.htm Please read http://dts-l.org/goodpost.htm on how to post messages to NG's or http://www.microsoft.com/presspass/f.../Mar27pmvp.asp "Bill Thornton" wrote in message ... I have this error28 on my sound, does anyone know what it means. On my dsl i have error2 and can anyone help me fix these problems |
Thread Tools | |
Display Modes | |
|
|