A Windows 98 & ME forum. Win98banter

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » Win98banter forum » Windows 98 » Monitors & Displays
Site Map Home Authors List Search Today's Posts Mark Forums Read Web Partners

SCSI controller - 'code 10'



 
 
Thread Tools Display Modes
  #11  
Old April 6th 06, 01:01 AM posted to microsoft.public.win98.display.general
external usenet poster
 
Posts: n/a
Default SCSI controller - 'code 10'

Hi Brian,
have had some problems with the drivers...
I removed the display and scsi host adapters from DM, and SIS from
add/remove hardware then attempted to install the motherboard driver i
downloaded from aopen (4-in1 vR4.41 - an exe file), using the auto hardware
detection upon reboot but it wouldn't open the .exe file so did it manually
and opt to install the 4 parts. However, DM still shows the original driver
(SIS6326 v146).
The SCSI host adapter driver I attempted to install is apparently older than
the one already installed so won't install even when I try to over-ride the
options. Its still showing as a code 10 with yellow exclamation mark in DM.
However, the display is somewhat better after all that.
Maybe I did something wrong, or maybe I just have to accept its as good as
its going to get with the age/quality of my system (and being a hopelessly
inadequate operator!)
Sincerely appreciate all your efforts Brian...
regards
Don


"Brian A." wrote:

You do not have to remove anything prior to download, you need to
uninstall the present drivers prior to installing the updated drivers.

The drivers to uninstall depend on the drivers you are
re-installing/updating.
For the Video drivers uninstall the drivers in DM under Display/Video
Adapters. Also afterwards have a look in Control Panel Add/Remove
Programs for anything related to the video adapter/chip.

For the Audio drivers in DM look under Sound, Video and Game Controllers.

Your best bet is to boot to Safe mode and remove any/all instances of the
drivers for Video and Sound, reboot and when Windows redetects them point
to the folder with the new drivers as the place to install them from.

--

Brian A. Sesko { MS MVP_Shell/User }
Conflicts start where information lacks.
http://basconotw.mvps.org/

Suggested posting do's/don'ts: http://www.dts-l.org/goodpost.htm
How to ask a question: http://support.microsoft.com/kb/555375




"Don" wrote in message
...
Hi Brian,
apologies for not replying sooner - haven't been able to access the site
for
weeks and microsoft said this site was no longer in operation....well,
here
you are! (thank goodness)

I am about to download the following (see below) and assume I need a
4-in1
as the others are only audio drivers?
It states to remove current drivers before downloading - do I just go
into
Device Manager and remove the drivers listed under audio/video or am I
meant
to remove the entire 'motherboard drivers' listed somewhere (where?) I
can
only see 'motherboard resources' listed under "system devices" in DM, but
surely this isn't everything associated with the new driver?
Sorry this is dragging on, but I really need your assistance and
appreciate
your patience - thanks Brian!
4 IN 1 Driver R4.41v(a)p7 9/23/2002
1323 KB
Applies to all models. This driver includes:
VIA ATAPI Vendor Support Driver
AGP VxD Driver
IRQ Routing Miniport Driver
VIA INF Driver
Note: Please remove the current version in your system before you
upgrade the
driver. This version supported the following OS including 98SE, NT,
2000,
ME, and
XP etc.

OS Support:Win98, Win98SE, WinME, WinNT, WinXP


"Brian A." wrote:

You can get the motherboard video/audio drivers he
http://usa.aopen.com/tech/

Select download center on the left.
Next page select Driver on the left.
Next page above the list select:
Motherboard and wait for it to load.
MX34 and wait for it to load.
Driver and wait for it to load.

Download/install the drivers per the manufacturers instructions.

Or If you are using a Video card:
http://www.sis.com/download/download_step1.php

and audio:
http://us.creative.com/support/downloads/

Use the auto update link since I don't know the model # of the SB Pro.

Domex SCSI/RAID Controller DMX3181X ISA SCSI
If you get a popup to install korean language select no.
http://www.domex.com.tw/support/driver.htm




--

Brian A. Sesko { MS MVP_Shell/User }
Conflicts start where information lacks.
http://basconotw.mvps.org/

Suggested posting do's/don'ts: http://www.dts-l.org/goodpost.htm
How to ask a question: http://support.microsoft.com/kb/555375




"Don" wrote in message
...
Hi,
Hope someone can help?
Have a problem - my system started in safemode so I restarted it but
the
display had altered (ghost-like and colours altered but settings
unchanged).
Looked in Device manager and have the yellow exclamation mark under
"SCSI
Controllers" for "DMX3181X ISA SCSI Host Adapter" (other listed is for
EPPSCSI miniport driver - all ok). Under resources tab says code 10 -
device
drivers either not present or not working properly.
Have searched everywhere to reinstall but can't find the original
driver
in
my system.
Anyway, is this affecting the display or is this 'host adapter' only
related
to my scanner? I'm confused!
I need to get my display happening again and can't. Where can I get
new
drivers for that and what info do you need to help? Many thanks for
any
assistance.




 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Boot KB General 8 May 15th 05 11:39 PM
WinMe conflict w/ Intel 82371 AB/EB PCI Bus Master IDE Controller Fernando Reyes Hardware 2 September 22nd 04 12:46 AM
Please help! Display settings !! Mitzi Monitors & Displays 12 July 11th 04 05:19 AM
Seeking SCSI controller driver Joe Setup & Installation 1 June 11th 04 10:57 PM
IDE Controller Error (Code 10) Graham Womack General 6 June 5th 04 10:25 PM


All times are GMT +1. The time now is 10:13 PM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 Win98banter.
The comments are property of their posters.