If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Point and Print updates with Win9x?
Hi all,
My understanding of Point and Print is as follows: When first printing from a Win9x or Win32 client to a Windows 2000 or Windows Server 2003 print server, the appropriate driver (if available) is downloaded from the server. In addition, when a Win32 client sends a job to the server, the server compares the client's version of the driver with its own version, and if the server's is newer than the client's, the server upgrades the driver. My question is: is there any way to install a newer version of a driver on Win9x clients on a large network without having to walk around to all these clients and manually perform the upgrade? I am curious about the mechanism by which the Win9x driver is first downloaded to the client and whether this could be exploited in some way to perform an upgrade. Thanks very much, - Mark |
#2
|
|||
|
|||
Point and Print updates with Win9x?
This question should be asked in the Servers newsgroups.
-- Cari MS-MVP Windows Technologies - Printing/Imaging/Hardware www.coribright.com "Mark Taylor" wrote in message ... Hi all, My understanding of Point and Print is as follows: When first printing from a Win9x or Win32 client to a Windows 2000 or Windows Server 2003 print server, the appropriate driver (if available) is downloaded from the server. In addition, when a Win32 client sends a job to the server, the server compares the client's version of the driver with its own version, and if the server's is newer than the client's, the server upgrades the driver. My question is: is there any way to install a newer version of a driver on Win9x clients on a large network without having to walk around to all these clients and manually perform the upgrade? I am curious about the mechanism by which the Win9x driver is first downloaded to the client and whether this could be exploited in some way to perform an upgrade. Thanks very much, - Mark |
#3
|
|||
|
|||
Point and Print updates with Win9x?
Thanks, Cari, will do.
- Mark In article , "Cari \(MS-MVP\)" wrote: This question should be asked in the Servers newsgroups. -- Cari MS-MVP Windows Technologies - Printing/Imaging/Hardware www.coribright.com "Mark Taylor" wrote in message ... Hi all, My understanding of Point and Print is as follows: When first printing from a Win9x or Win32 client to a Windows 2000 or Windows Server 2003 print server, the appropriate driver (if available) is downloaded from the server. In addition, when a Win32 client sends a job to the server, the server compares the client's version of the driver with its own version, and if the server's is newer than the client's, the server upgrades the driver. My question is: is there any way to install a newer version of a driver on Win9x clients on a large network without having to walk around to all these clients and manually perform the upgrade? I am curious about the mechanism by which the Win9x driver is first downloaded to the client and whether this could be exploited in some way to perform an upgrade. Thanks very much, - Mark |
Thread Tools | |
Display Modes | |
|
|