A Windows 98 & ME forum. Win98banter

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » Win98banter forum » Windows ME » Printing
Site Map Home Authors List Search Today's Posts Mark Forums Read Web Partners

Fax help



 
 
Thread Tools Display Modes
  #1  
Old December 24th 05, 05:09 AM posted to microsoft.public.windowsme.printing
external usenet poster
 
Posts: n/a
Default Fax help

I've just installed a HP 4215 all in one on a dsl connection. Installation
went smooth and I'm able to scan, copy and print but I can't fax. I can't
figure for the life of me a way to send and recieve faxes. Can someone help
with setting up the fax aspect on this pc. I connect through a westell 327w
router with windows me. Thanks in advance.

  #2  
Old December 24th 05, 07:23 AM posted to microsoft.public.windowsme.printing
external usenet poster
 
Posts: n/a
Default Fax help

You have to use an ordinary phone line for fax - you can't use the Internet

--
Noel Paton (MS-MVP 2002-2006, Windows)

Nil Carborundum Illegitemi
http://www.crashfixpc.com/millsrpch.htm

http://tinyurl.com/6oztj

Please read http://dts-l.org/goodpost.htm on how to post messages to NG's
"Speedy G." wrote in message
...
I've just installed a HP 4215 all in one on a dsl connection. Installation
went smooth and I'm able to scan, copy and print but I can't fax. I can't
figure for the life of me a way to send and recieve faxes. Can someone
help
with setting up the fax aspect on this pc. I connect through a westell
327w
router with windows me. Thanks in advance.



  #3  
Old December 24th 05, 11:15 PM posted to microsoft.public.windowsme.printing
external usenet poster
 
Posts: n/a
Default Fax help

Thanks Noel.
As far as I know it is an Ordinary voice\data phone line. Please explain on
how I can have a fax enabled line.

"Noel Paton" wrote:

You have to use an ordinary phone line for fax - you can't use the Internet

--
Noel Paton (MS-MVP 2002-2006, Windows)

Nil Carborundum Illegitemi
http://www.crashfixpc.com/millsrpch.htm

http://tinyurl.com/6oztj

Please read http://dts-l.org/goodpost.htm on how to post messages to NG's
"Speedy G." wrote in message
...
I've just installed a HP 4215 all in one on a dsl connection. Installation
went smooth and I'm able to scan, copy and print but I can't fax. I can't
figure for the life of me a way to send and recieve faxes. Can someone
help
with setting up the fax aspect on this pc. I connect through a westell
327w
router with windows me. Thanks in advance.




  #4  
Old December 24th 05, 11:40 PM posted to microsoft.public.windowsme.printing
external usenet poster
 
Posts: n/a
Default Fax help

Does your PC have a modem connecting it to your voice line? This is not
your connection to your Westell router. You need to be able to dial up
the number to which you wish to send your fax. Unless you can do that you
will not be able to send or receive faxes.
--
Mike Maltby



Speedy G. wrote:

Thanks Noel.
As far as I know it is an Ordinary voice\data phone line. Please
explain on how I can have a fax enabled line.


  #5  
Old December 26th 05, 10:48 PM posted to microsoft.public.windowsme.printing
external usenet poster
 
Posts: n/a
Default Fax help

My netodragon dialup modem was taken out when i upgraded to dsl and a
external router\modem (versalink 327w). What I did was added a phone splitter
into the back of the Versalink. The phone line from the all in one going into
one side of the splitter and the other phone line going out into the wall
jack. With this setup I have no problems sending and recieving faxes while
online.

"Mike M" wrote:

Does your PC have a modem connecting it to your voice line? This is not
your connection to your Westell router. You need to be able to dial up
the number to which you wish to send your fax. Unless you can do that you
will not be able to send or receive faxes.
--
Mike Maltby



Speedy G. wrote:

Thanks Noel.
As far as I know it is an Ordinary voice\data phone line. Please
explain on how I can have a fax enabled line.



  #6  
Old December 26th 05, 11:19 PM posted to microsoft.public.windowsme.printing
external usenet poster
 
Posts: n/a
Default Fax help

If you don't have a POST or PSTN (Public Switched Telephone Network) modem
then you cannot send faxes. Since you say you removed your modem you
cannot send faxes. You cannot send faxes over DSL unless you happen to
subscribe to a web service that will transcribe faxes for you and then
forward them for you over PSTN to the target number.

You cannot send faxes using the system you describe.
--
Mike Maltby



Speedy G. wrote:

My netodragon dialup modem was taken out when i upgraded to dsl and a
external router\modem (versalink 327w). What I did was added a phone
splitter into the back of the Versalink. The phone line from the all
in one going into one side of the splitter and the other phone line
going out into the wall jack. With this setup I have no problems
sending and recieving faxes while online.


  #7  
Old December 27th 05, 12:07 AM posted to microsoft.public.windowsme.printing
external usenet poster
 
Posts: n/a
Default Fax help

Thanks for explaining. I'm a bit cofused and need to do more research on this
matter. If what you say is true why am I able to send and recieve faxes. I
have faxed to three different faxes numbers successfully and each recieved
the test faxes sent from my destination. I also asked the recipients to send
a test fax back and I recieved them successfully. Is it possible when
installing the Hewlard Packard product that the necessary components were
installed with package. There has to be at least 70mbs that was added when
installing from the H.P. software, one of which is the Net Framework. Thanks
Mike,


"Mike M" wrote:

If you don't have a POST or PSTN (Public Switched Telephone Network) modem
then you cannot send faxes. Since you say you removed your modem you
cannot send faxes. You cannot send faxes over DSL unless you happen to
subscribe to a web service that will transcribe faxes for you and then
forward them for you over PSTN to the target number.

You cannot send faxes using the system you describe.
--
Mike Maltby



Speedy G. wrote:

My netodragon dialup modem was taken out when i upgraded to dsl and a
external router\modem (versalink 327w). What I did was added a phone
splitter into the back of the Versalink. The phone line from the all
in one going into one side of the splitter and the other phone line
going out into the wall jack. With this setup I have no problems
sending and recieving faxes while online.



  #8  
Old December 27th 05, 12:51 AM posted to microsoft.public.windowsme.printing
external usenet poster
 
Posts: n/a
Default Fax help

I'm sorry but I appear to be missing something. Your first post to this
thread said "but I can't fax" but now you say you can so what exactly is
the problem you are having? If your HP4215 (a product I don't know) is
connected to the phone circuit then it can fax. From the HP web site I
see that the HP4215 does indeed have its own built-in 33.6Kbps modem which
when connected to a phone circuit is how it can send faxes and this is
entirely independent of your PC or your ADSL connection.
--
Mike Maltby



Speedy G. wrote:

Thanks for explaining. I'm a bit cofused and need to do more research
on this matter. If what you say is true why am I able to send and
recieve faxes. I have faxed to three different faxes numbers
successfully and each recieved the test faxes sent from my
destination. I also asked the recipients to send a test fax back and
I recieved them successfully. Is it possible when installing the
Hewlard Packard product that the necessary components were installed
with package. There has to be at least 70mbs that was added when
installing from the H.P. software, one of which is the Net Framework.


  #9  
Old December 27th 05, 02:14 AM posted to microsoft.public.windowsme.printing
external usenet poster
 
Posts: n/a
Default Fax help

Sorry Mike for not mentioning it but before posting I had changed the phone
wire coming from the all in one to the wall outlet to the splitter behind the
versalink. When the phone wire was connected, via splitter to the wall jack I
would get no dsl signal. I since changed that wire to go into the splitter at
the back of the versalink. With this configuration I am able to fax and
recieve.

From the HP web site I
see that the HP4215 does indeed have its own built-in 33.6Kbps modem

That is why I'm able to fax. Thanks for that interesting tidbit.


"Mike M" wrote:

I'm sorry but I appear to be missing something. Your first post to this
thread said "but I can't fax" but now you say you can so what exactly is
the problem you are having? If your HP4215 (a product I don't know) is
connected to the phone circuit then it can fax. From the HP web site I
see that the HP4215 does indeed have its own built-in 33.6Kbps modem which
when connected to a phone circuit is how it can send faxes and this is
entirely independent of your PC or your ADSL connection.
--
Mike Maltby



Speedy G. wrote:

Thanks for explaining. I'm a bit cofused and need to do more research
on this matter. If what you say is true why am I able to send and
recieve faxes. I have faxed to three different faxes numbers
successfully and each recieved the test faxes sent from my
destination. I also asked the recipients to send a test fax back and
I recieved them successfully. Is it possible when installing the
Hewlard Packard product that the necessary components were installed
with package. There has to be at least 70mbs that was added when
installing from the H.P. software, one of which is the Net Framework.



  #10  
Old December 27th 05, 02:29 AM posted to microsoft.public.windowsme.printing
external usenet poster
 
Posts: n/a
Default Fax help

OK. Understood. I think that if you want to wire the HP4215 to the wall
outlet rather than to the outlet on the back of the router/modem you will
need to use a microfilter at the wall socket to isolate the frequencies
used for the "phone service" (and hence also the fax) from those used for
ADSL. Without a microfilter on the phone/fax cable the DSL signal to the
router modem will be seriously degraded.
--
Mike Maltby


..
Speedy G. wrote:

Sorry Mike for not mentioning it but before posting I had changed the
phone wire coming from the all in one to the wall outlet to the
splitter behind the versalink. When the phone wire was connected, via
splitter to the wall jack I would get no dsl signal. I since changed
that wire to go into the splitter at the back of the versalink. With
this configuration I am able to fax and recieve.

From the HP web site I
see that the HP4215 does indeed have its own built-in 33.6Kbps modem

That is why I'm able to fax. Thanks for that interesting tidbit.


 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT +1. The time now is 07:46 PM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 Win98banter.
The comments are property of their posters.