A Windows 98 & ME forum. Win98banter

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » Win98banter forum » Windows ME » Printing
Site Map Home Authors List Search Today's Posts Mark Forums Read Web Partners

Lexmark z601 printer



 
 
Thread Tools Display Modes
  #1  
Old August 17th 04, 04:21 PM
Joanne
external usenet poster
 
Posts: n/a
Default Lexmark z601 printer

USB Controller not listed in Device Manager. Can anyone
help?
  #2  
Old August 17th 04, 07:21 PM
Cari \(MS-MVP\)
external usenet poster
 
Posts: n/a
Default

Do you have USB ports on your PC?
--
Cari ((MS-MVP Printing, Imaging & Hardware)
www.coribright.com

"Joanne" wrote in message
...
USB Controller not listed in Device Manager. Can anyone
help?



  #3  
Old August 17th 04, 09:08 PM
Joanne
external usenet poster
 
Posts: n/a
Default

Hi. Thanks for the reply. Sorry it took so long to come
back to you. Yes got USB ports on PC. Troubleshoot has
suggested to go to Setup - Device Manager - then confirm
USB Controller is activated but USB doesn't appear on the
list.
-----Original Message-----
Do you have USB ports on your PC?
--
Cari ((MS-MVP Printing, Imaging & Hardware)
www.coribright.com

"Joanne" wrote in

message
...
USB Controller not listed in Device Manager. Can anyone
help?



.

  #4  
Old August 18th 04, 08:08 PM
Cari \(MS-MVP\)
external usenet poster
 
Posts: n/a
Default

Somehow your motherboard has 'lost' the USB port.....

I'd suggest you post in the WindowsMe Hardware newsgroup.

If it's a separate USB card, the easiest method is to turn off the PC,
uninstall the card, startup the PC without the card and let it enter
Windows, then turn off the PC again and reinstall the card, then again
startup and WindowsME should redetect the card and install the drivers. If
the USB ports are on the motherboard, you may need to install the
motherboard drivers or the onboard ports may have died. Either way, the
hardware newsgroup will be able to help further.
--
Cari ((MS-MVP Printing, Imaging & Hardware)
www.coribright.com

"Joanne" wrote in message
...
Hi. Thanks for the reply. Sorry it took so long to come
back to you. Yes got USB ports on PC. Troubleshoot has
suggested to go to Setup - Device Manager - then confirm
USB Controller is activated but USB doesn't appear on the
list.
-----Original Message-----
Do you have USB ports on your PC?
--
Cari ((MS-MVP Printing, Imaging & Hardware)
www.coribright.com

"Joanne" wrote in

message
...
USB Controller not listed in Device Manager. Can anyone
help?



.



  #5  
Old August 20th 04, 10:38 PM
Noel Paton
external usenet poster
 
Posts: n/a
Default

There's also the possibility that the USB ports were switched off in the
BIOS - especially in an older machine that originally shipped with Win 95

--
Noel Paton (MS-MVP 2002-2004, Win9x)

Nil Carborundum Illegitemi
http://www.btinternet.com/~winnoel/millsrpch.htm
http://tinyurl.com/6oztj

Please read http://dts-l.org/goodpost.htm on how to post messages to NG's

"Cari (MS-MVP)" wrote in message
...
Somehow your motherboard has 'lost' the USB port.....

I'd suggest you post in the WindowsMe Hardware newsgroup.

If it's a separate USB card, the easiest method is to turn off the PC,
uninstall the card, startup the PC without the card and let it enter
Windows, then turn off the PC again and reinstall the card, then again
startup and WindowsME should redetect the card and install the drivers.
If
the USB ports are on the motherboard, you may need to install the
motherboard drivers or the onboard ports may have died. Either way, the
hardware newsgroup will be able to help further.
--
Cari ((MS-MVP Printing, Imaging & Hardware)
www.coribright.com

"Joanne" wrote in message
...
Hi. Thanks for the reply. Sorry it took so long to come
back to you. Yes got USB ports on PC. Troubleshoot has
suggested to go to Setup - Device Manager - then confirm
USB Controller is activated but USB doesn't appear on the
list.
-----Original Message-----
Do you have USB ports on your PC?
--
Cari ((MS-MVP Printing, Imaging & Hardware)
www.coribright.com

"Joanne" wrote in

message
...
USB Controller not listed in Device Manager. Can anyone
help?


.





 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Lexmark z515 printer doesn't see USB port j smith General 8 November 11th 04 05:53 AM
Lexmark Z32: "Printer not Ready..." Ben B Printing 15 July 2nd 04 05:31 PM
printer driver Chuck Printing 0 June 12th 04 10:02 PM
How do I print to TCPIP connected printer from Win98? Al Dykes Networking 0 June 6th 04 04:13 PM
share a printer on WIN98 Blair Networking 5 June 1st 04 05:43 PM


All times are GMT +1. The time now is 03:12 PM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 Win98banter.
The comments are property of their posters.