If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
|
#1
|
|||
|
|||
How to use Windows ME Bootdisk?
im trying to install ME On a friends computer. downloaded the OEM version
from Bootdisks .com. when i start the floppy, it asks if i want to start with or without cd-rom support. i pick option 2 to start with cd-rom support. It loads the oakly driver and the virtual ramdrive and all the dos stuff. then it goes to the A: prompt. What command or commands do i type in in order to start the setup procedure for the ME cd? Thanlks Paul |
#2
|
|||
|
|||
How to use Windows ME Bootdisk?
Assuming your CD-ROM becomes the E: drive (it will tell you on screen during
the floppy booting process) then a the A: prompt, type "E:" (no quotes and press Return) and the A: prompt will become an E: prompt. Then type "setup" (no quotes then press Return) Mart "Paul S." wrote in message ... im trying to install ME On a friends computer. downloaded the OEM version from Bootdisks .com. when i start the floppy, it asks if i want to start with or without cd-rom support. i pick option 2 to start with cd-rom support. It loads the oakly driver and the virtual ramdrive and all the dos stuff. then it goes to the A: prompt. What command or commands do i type in in order to start the setup procedure for the ME cd? Thanlks Paul |
#3
|
|||
|
|||
How to use Windows ME Bootdisk?
Thanks mart for the quick response! One question? What do you mean by Return?
Do you mean Enter? Please explain. Thanks paul "Mart" wrote: Assuming your CD-ROM becomes the E: drive (it will tell you on screen during the floppy booting process) then a the A: prompt, type "E:" (no quotes and press Return) and the A: prompt will become an E: prompt. Then type "setup" (no quotes then press Return) Mart "Paul S." wrote in message ... im trying to install ME On a friends computer. downloaded the OEM version from Bootdisks .com. when i start the floppy, it asks if i want to start with or without cd-rom support. i pick option 2 to start with cd-rom support. It loads the oakly driver and the virtual ramdrive and all the dos stuff. then it goes to the A: prompt. What command or commands do i type in in order to start the setup procedure for the ME cd? Thanlks Paul |
#4
|
|||
|
|||
How to use Windows ME Bootdisk?
"Paul S." wrote: Thanks mart for the quick response! One question? What do you mean by Return? Do you mean Enter? Plus when we did put in setup, we got a message stating only that setup requires so many kbs of drive space but no other action as far as setup for ME!? Thanks Paul "Mart" wrote: Assuming your CD-ROM becomes the E: drive (it will tell you on screen during the floppy booting process) then a the A: prompt, type "E:" (no quotes and press Return) and the A: prompt will become an E: prompt. Then type "setup" (no quotes then press Return) Mart "Paul S." wrote in message ... im trying to install ME On a friends computer. downloaded the OEM version from Bootdisks .com. when i start the floppy, it asks if i want to start with or without cd-rom support. i pick option 2 to start with cd-rom support. It loads the oakly driver and the virtual ramdrive and all the dos stuff. then it goes to the A: prompt. What command or commands do i type in in order to start the setup procedure for the ME cd? Thanlks Paul |
#5
|
|||
|
|||
How to use Windows ME Bootdisk?
Hi Paul, yes Return (or 'carriage return' from typewriter days) = Enter.
Just be sure to confirm the (temporary) designation of your CD-ROM which will show on the 'scrolling' DOS screen just before the floppy settles down with the A: prompt. N.B this temporary drive letter is not necessarily the same letter as you normally expect. Mart "Paul S." wrote in message ... Thanks mart for the quick response! One question? What do you mean by Return? Do you mean Enter? Please explain. Thanks paul "Mart" wrote: Assuming your CD-ROM becomes the E: drive (it will tell you on screen during the floppy booting process) then a the A: prompt, type "E:" (no quotes and press Return) and the A: prompt will become an E: prompt. Then type "setup" (no quotes then press Return) Mart "Paul S." wrote in message ... im trying to install ME On a friends computer. downloaded the OEM version from Bootdisks .com. when i start the floppy, it asks if i want to start with or without cd-rom support. i pick option 2 to start with cd-rom support. It loads the oakly driver and the virtual ramdrive and all the dos stuff. then it goes to the A: prompt. What command or commands do i type in in order to start the setup procedure for the ME cd? Thanlks Paul |
#6
|
|||
|
|||
How to use Windows ME Bootdisk?
Paul
Carriage return http://en.wikipedia.org/wiki/Carriage_return Enter key http://en.wikipedia.org/wiki/Enter_key Mart "Mart" wrote in message ... Hi Paul, yes Return (or 'carriage return' from typewriter days) = Enter. Just be sure to confirm the (temporary) designation of your CD-ROM which will show on the 'scrolling' DOS screen just before the floppy settles down with the A: prompt. N.B this temporary drive letter is not necessarily the same letter as you normally expect. Mart "Paul S." wrote in message ... Thanks mart for the quick response! One question? What do you mean by Return? Do you mean Enter? Please explain. Thanks paul "Mart" wrote: Assuming your CD-ROM becomes the E: drive (it will tell you on screen during the floppy booting process) then a the A: prompt, type "E:" (no quotes and press Return) and the A: prompt will become an E: prompt. Then type "setup" (no quotes then press Return) Mart "Paul S." wrote in message ... im trying to install ME On a friends computer. downloaded the OEM version from Bootdisks .com. when i start the floppy, it asks if i want to start with or without cd-rom support. i pick option 2 to start with cd-rom support. It loads the oakly driver and the virtual ramdrive and all the dos stuff. then it goes to the A: prompt. What command or commands do i type in in order to start the setup procedure for the ME cd? Thanlks Paul |
#7
|
|||
|
|||
How to use Windows ME Bootdisk?
Hi Mart followed you directions. But after switching Command prompt to cd-rom
drive letter and typing in install. get an error message saying "invalid media type reading Drive C? abort? Retry? Fail? What are we doing wrong Why is it reading Drive C and not the cd-rom drive. Thanks Paul "Mart" wrote: Paul Carriage return http://en.wikipedia.org/wiki/Carriage_return Enter key http://en.wikipedia.org/wiki/Enter_key Mart "Mart" wrote in message ... Hi Paul, yes Return (or 'carriage return' from typewriter days) = Enter. Just be sure to confirm the (temporary) designation of your CD-ROM which will show on the 'scrolling' DOS screen just before the floppy settles down with the A: prompt. N.B this temporary drive letter is not necessarily the same letter as you normally expect. Mart "Paul S." wrote in message ... Thanks mart for the quick response! One question? What do you mean by Return? Do you mean Enter? Please explain. Thanks paul "Mart" wrote: Assuming your CD-ROM becomes the E: drive (it will tell you on screen during the floppy booting process) then a the A: prompt, type "E:" (no quotes and press Return) and the A: prompt will become an E: prompt. Then type "setup" (no quotes then press Return) Mart "Paul S." wrote in message ... im trying to install ME On a friends computer. downloaded the OEM version from Bootdisks .com. when i start the floppy, it asks if i want to start with or without cd-rom support. i pick option 2 to start with cd-rom support. It loads the oakly driver and the virtual ramdrive and all the dos stuff. then it goes to the A: prompt. What command or commands do i type in in order to start the setup procedure for the ME cd? Thanlks Paul |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
BootDisk (Att. Terhune, Rawat) | BAP | General | 67 | March 31st 05 04:06 AM |
How do I run the Windows ME bootdisk? | Larry | General | 3 | March 14th 05 04:33 PM |
BootDisk | Haggis | General | 5 | March 4th 05 12:38 AM |
How to create a bootdisk to access the CD-RW? | David H. Lipman | General | 4 | February 15th 05 06:05 AM |
CD Network bootdisk | jeves | Setup & Installation | 1 | October 15th 04 08:16 PM |