If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
display adapter issue
I have an ATI rage fury pro/xpert 2000 pro display adaptor, at least that's
what the device manager tells me. On occasion, during warm reboots, the machine will lose the display driver during the reboot. It'll get past the Windows's screen and when the desktop is supposed to start loading, the screen is black. Rebooting again will make the system go into the startup menu after the Windows splash screen. It doesn't matter which option you choose because it'll go straight into safe mode. Once it loads the wallpaper the display properties will come up and I can change to high color 16 bit. After the prompt to restart the machine will act fine again and I can resize the desktop and change it to true 32. This issue has gone on for years now. It'll happen more often if I change the hardware acceleration past 0%. Checked ATI's site but no updated drivers. Thanks in advance. |
#2
|
|||
|
|||
display adapter issue
I had similar problems. Moving the hardware accel down would make it go
away. The cure was to obtain a different graphics card, in my case. There were no updated drivers for my old card and it just would not do the trick anymore. The nice part is, you can get a decent graphics card pretty cheap. My bet would be that would fix your problem. Heirloom, old and did it for me "SSJ04 Mewtwo" wrote in message ... I have an ATI rage fury pro/xpert 2000 pro display adaptor, at least that's what the device manager tells me. On occasion, during warm reboots, the machine will lose the display driver during the reboot. It'll get past the Windows's screen and when the desktop is supposed to start loading, the screen is black. Rebooting again will make the system go into the startup menu after the Windows splash screen. It doesn't matter which option you choose because it'll go straight into safe mode. Once it loads the wallpaper the display properties will come up and I can change to high color 16 bit. After the prompt to restart the machine will act fine again and I can resize the desktop and change it to true 32. This issue has gone on for years now. It'll happen more often if I change the hardware acceleration past 0%. Checked ATI's site but no updated drivers. Thanks in advance. |
#3
|
|||
|
|||
display adapter issue
Heirloom wrote:
I had similar problems. Moving the hardware accel down would make it go away. The cure was to obtain a different graphics card, in my case. There were no updated drivers for my old card and it just would not do the trick anymore. The nice part is, you can get a decent graphics card pretty cheap. My bet would be that would fix your problem. Heirloom, old and did it for me Thanks Loom. Whenever I can get the funds I'll look into that. Money's been tight recently. |
#4
|
|||
|
|||
display adapter issue
I certainly can relate to that. Might I suggest you check around at some of
your local computer shops.....very often they will have old cards that are left over from someone's upgrade, etc. that are working just fine and you can pick one up for next to nothing. You should be able to pick up an old 32Meg card for a few bucks and that would be plenty for a machine running Me.....a 64 Meg card shouldn't be much either. It is hard to find a new card with less than 128 meg anymore! Heirloom, old and just make sure you get the Me compatible drivers with it!!! "SSJ04 Mewtwo" wrote in message ... Heirloom wrote: I had similar problems. Moving the hardware accel down would make it go away. The cure was to obtain a different graphics card, in my case. There were no updated drivers for my old card and it just would not do the trick anymore. The nice part is, you can get a decent graphics card pretty cheap. My bet would be that would fix your problem. Heirloom, old and did it for me Thanks Loom. Whenever I can get the funds I'll look into that. Money's been tight recently. |
#5
|
|||
|
|||
display adapter issue
Heirloom wrote:I certainly can relate to that.
Might I suggest you check around at some of your local computer shops.....very often they will have old cards that are left over from someone's upgrade, etc. that are working just fine and you can pick one up for next to nothing. You should be able to pick up an old 32Meg card for a few bucks and that would be plenty for a machine running Me.....a 64 Meg card shouldn't be much either. It is hard to find a new card with less than 128 meg anymore! Heirloom, old and just make sure you get the Me compatible drivers with it!!! Amen to that. I'll have to e-mail freedom scientific to see if there's a card that I shouldn't get because it'll mess with my JAWS for Windows. |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Display Adapter | Darlene | Setup & Installation | 1 | June 23rd 07 09:03 PM |
Display adapter | Billie | General | 4 | November 25th 04 02:01 PM |
Wirless PCI adapter hardware issue? | guayabera | Hardware | 0 | September 15th 04 05:24 AM |
display issue | Ralph Smith | General | 1 | August 27th 04 04:32 PM |
display adapter | lc | Monitors & Displays | 1 | June 3rd 04 04:31 AM |