View Single Post
  #8  
Old July 12th 06, 02:22 AM posted to microsoft.public.windowsme.setup
Delboy
External Usenet User
 
Posts: 10
Default Reverting to earlier version of Windows

Sooner or later the posts will be deleted from the server.

Try making a new email folder, call it "Useful Posts" or something and copy
anything you want to save to it.

Alternatively copy and paste to a NotePad and save it with a useful name.

--
Delboy

A common mistake that people made when trying to design something completely
foolproof was to underestimate the ingenuity of complete fools.

Douglas Adams
"Sleepless in New Jersey"
wrote in message ...
Thanks for the additional help.

If I can get the flash drive to work in Win 98, I may just forego the
upgrade to ME.

I hope you might help me with one more thing. I want to mark your posts

as
helpful or something. I dimly recall doing this in the past. Now I'm
staring at the screen looking for some way of doing this. If it is there

I
just can't see it.

Subject: Reverting to earlier version of Windows 7/8/2006 1:03 PM

PST

By: Noel Paton In: microsoft.public.windowsme.setup


Installation problems of that kind are usually caused by installing the
drivers *after* plugging the drive in.
try this
Power down, and unplug all USB devices
Boot to Safe Mode, remove ALL USB-related entries in Device Manager
reboot to Normal Mode, and allow Windows to reinstall the drivers for the
base USB socket and hubs, and reboot again - then install the drivers for
the flash drives, and then plug the drives in

--
Noel Paton (MS-MVP 2002-2006, Windows)

Nil Carborundum Illegitemi



"Noel Paton" wrote:

Installation problems of that kind are usually caused by installing the
drivers *after* plugging the drive in.
try this
Power down, and unplug all USB devices
Boot to Safe Mode, remove ALL USB-related entries in Device Manager
reboot to Normal Mode, and allow Windows to reinstall the drivers for

the
base USB socket and hubs, and reboot again - then install the drivers

for
the flash drives, and then plug the drives in

--
Noel Paton (MS-MVP 2002-2006, Windows)

Nil Carborundum Illegitemi
http://www.crashfixpc.com

http://tinyurl.com/6oztj

Please read http://dts-l.org/goodpost.htm on how to post messages to

NG's
"Sleepless in New Jersey"


wrote in message

...
Thanks for your reply. I'm doing the upgrade essentially for USB

support.
I
have never been able to install a USB driver in Win 98 SE from the

flash
drive-included CD successfully.

I know that I'm very late in replying. I've gone days without being

able
to
access this forum.

"Noel Paton" wrote:


"Sleepless in New Jersey"

wrote in message
...
I'm about to upgrade a friend's PC from Windows 98 to ME. I will
retain
the
existing setup in case something goes wrong. If it does, how can I
restore
Windows?

Using Add/Remove Programs.
It's far better, though, to use a proper Image of the drive, if you

have
the
software and hardware available - the A/R programs relies on the

upgrade
being reasonably sane in the first place.

There's not really much point in doing such an upgrade from 98SE to

ME -
is
this 98FE?? - are you doing it for USB support?

--
Noel Paton (MS-MVP 2002-2006, Windows)

Nil Carborundum Illegitemi
http://www.crashfixpc.com/millsrpch.htm

http://tinyurl.com/6oztj

Please read http://dts-l.org/goodpost.htm on how to post messages to

NG's