View Single Post
  #5  
Old August 14th 04, 09:52 PM
PCR
external usenet poster
 
Posts: n/a
Default

Best look for a fix first, as Brian A. & Phyllis have suggested. But
here is what I have for a reinstall of Windows...

If errors are caused by hardware, then a reinstall of Windows is not the
cure. However...

Setup.exe, run from your Installation CD or from your .cabs folder,
accomplishes either an Over-Install or a Fresh Install. The procedural
difference is you first wipe the prior Windows installation for a Fresh
Install, or install it to different folders. Two folders are involved:
"C:\Windows" & "C:\Program Files", and these files: MSDOS.sys,
Config.sys, Autoexec.bat & System.1st.

For an Over-install, you must direct it to install to C:\Windows,
instead of C:\Windows.000 (where it normally would want to go, when it
sees a "C:\Windows" already exists).

An over-install supposedly leaves all else intact, but there are some
who say it will over-write .vxds (drivers) and otherwise musses
settings. Therefore, it becomes a lot of work to do it, as you must
un/re-install large applications, before/after the over-install. Also,
you must go to Windows Update afterwards, to see whether it detects it
needs to reinstall it's criticals. There is Version Conflict Manager to
do. Finally, they say, it is wise to back up critical data even before
an over-install.

Others swear an over-install is effortless (under an hour) and
effective. Just select to install to the existing directory, when it
makes the offer to go elsewhere. If it fails, then you may need to do a
tweak, such as renaming Win.com before starting. (Personally, I have
never Fresh or Over-Installed Windows. I did actually click Setup.exe
once, and was presented with an alluring screenful-- but I cancelled.)
Well, anyway, take a look at the URLs below, which really apply to both.

You want to do a FRESH Install? Are you pure Windows or OEM, such as
Compaq? If you are OEM, then you can get back to factory condition by
using their recovery CD, such as QuickRestore, which may contain
proprietary drivers and add-ons. Otherwise...

http://www.hexff.com/index.html How to Clean Install
This first has it all, but..
(a) Perhaps don't do the 2.5 swap file thing, &
(b) You may rather have multiple partitions, &
(c) Attend it's warning: Have any non-Windows peripheral drivers
available to install afterwards. Here...
http://www.pchelpandconsulting.com/links/windows.html WinDrvExpert
http://www.jermar.com/wdrvbck.htm WinDrvBckup free version
Those two supposedly back up all currently installed drivers, such that
they can be reinstalled. I never tried it but have seen a favorable
report.

http://home.satx.rr.com/badour/html/w98_restore.html Badour has one
http://aumha.org/win4/a/clean.htm Aumha has one
http://support.microsoft.com/?kbid=250928 How to Reinstall Windows
http://support.microsoft.com/?kbid=193902
How to Reinstall Windows into a new folder

"Setup.txt", located in the same folder as "Setup.exe", either on CD or
hard drive. This instructs how to run it from a folder on the hard
drive, but "hexff" says it better.

Get a Startup Diskette from
http://www.bootdisk.com/ , if you don't already have one from "Control
Panel, Add/Remove Programs, Startup Disk tab". Test the Startup
Diskette. Boot it, put in a CD and "DIR" the CD. It will say which
letter is the CD. (Otherwise, it is likely one letter higher than
normal.)

Here is what I know of those Installation CD's. The full list of
capabilities of each type of CD is as follows, says Harper. Each
requires a valid Product key. "Proof" means it must see you had a prior
version. So, if it isn't sitting there, expect to insert a floppy or
earlier CD.

FULL VERSION: Will perform either clean install or upgrade of existing
OS. Does not ask for proof of ownership of an earlier version.

UPGRADE VERSION: Will perform either clean install or upgrade of
existing OS. Will ask for proof of ownership of an earlier version if
one is not installed.

WIN98 SE UPDATES: Will only install if Windows 98 is present on the hard
drive. Cannot be used for a clean install at all.

OEM VERSION: Only installs on a clean, fresh-formatted hard drive. May
be customized to include or omit components that would be found/not
found on a retail CD.

Be sure of your ProductKey...
HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\Curr entVersion
ProductKey "12345-12345-12345-12345-12345"

(1) "START, Run, RegEdit"
(2) Click plus signs beginning at "HKEY_LOCAL_MACHINE", & ending with
"Windows".
(3) Click "CurrentVersion" in the left pane under "Windows".
(4) Look in right pane for ProductKey.

That is the one that was used to install your current Windows. Jot it
down, as it may work if different from the one on your Windows 98 Manual
or CD case.


This courtesy of MS-MVP Ron Badour:
Go to
http://www.pricewatch.com, click on the software button and then search
on: win98. They have listings on boot up floppy disks, CDs but no
license, a license but no CD, OEM, W98, W98SE, update from W98 to W98SE
only and so on. Pay ATTENTION to what the listings say or you may end
up with something you don't want or need. You can also check on EBay or
other auction sites. You also need to be aware that most support for
W98 has terminated and all support terminates in Jan 04. Here's some
info about the various types of CDs:

RETAIL FULL INSTALL: This CD will either upgrade W95/98 to SE or you
can install it to a blank hard drive.

RETAIL UPGRADE INSTALL: This CD will either upgrade W95/98 to SE or you
can install it to a blank hard drive; however, when installing to a
blank drive, install will ask to see the qualifying system (i.e., W95)
disk(s).

OEM FULL INSTALL. This SE CD is designed to be installed to a blank
hard drive; however, there is a possibility that you can trick it into
upgrading. For info, go to:
http://home.satx.rr.com/badour/html/upgrade.html Be aware that if you
buy an OEM disk, it might be customized for installation on a particular
computer; however, this will probably be primarily with a used disk.

UPDATE CD: This CD will only update a functioning copy of W98 to W98SE.
When MS sold them, they were $20 and came with a ProductKey. Some
venders were selling them and advising customers to use the W98
ProductKey which may or may not work--don't get stung.

RECOVERY CD: Some companies will brand an OEM CD and call it a recovery
CD. You should avoid these unless it is the exact recovery CD you are
looking for. Many recovery CDs will only install on the equipment they
were intended for.


--
Thanks or Good Luck,
There may be humor in this post, and,
Naturally, you will not sue,
should things get worse after this,
PCR

"barry" wrote in message
...
| Does anyone know how to, or where to find detailed
| instructions for removing windows 98 and then reinstalling
| it? Is this called reformatting, or is that something
| different? Something is blocking my browser from the
| internet and I have uninstalled every program even closely
| related. The tech guy for my router says the problem is
| likely embedded itself and has remained even after
| uninstall. (the computer is communication with the
| internet but the browser is still dead)