Sorry...i hit the wrong button. this should have been in
reply to "glee" dated 3 oct
2004 in response to "e.c.l." windows 98 is now
starting your MS-DOS based programs. the original post
was made on 28 sep 2004
-----Original Message-----
thanks again glee.
i explained in a reply to "andrew carter" that this
little
event actually happened on my mum's computer. i wrote
the
post in first person so as to avoid a bunch of Qs as i
had
walked her thru all i could to a point.
after renaming the autoexec.bat and config.sys files as
you suggested we could, she was finally able to boot to
windows. i then had her send me the contents of each of
the files. they are as follows --
CONTENTS OF THE AUTOEXEC.BAT FILE:
@ECHO OFF
@ECHO OFF
REM To make a DOS Boot Diskette; See the file
C:\DOSBOOT\DOSBOOT.TXT
set path=c:\windows\command
c:\windows\smartdrv/q
LH c:\mouse\cloaking
c:\mouse\mouse ps2
SET PROMPT=&p&g
SET TEMP=C:\windows\TEMP
SET TMP=C:\windows\TEMP
SET BLASTER=A220 I5D1 T2
REM Set the Audio card
C:\WINDOWS\CWDINIT.EXE/A
Rem DOS Sound Mixer Program. Preset CD Volume to ON.
C:\windows\Cwdmix/M=9,9/W=13,13/C=13,13/L=13,13/X=1/F=15,1
5
/I=X
REM
REM The following lines have been created by Windows. Do
not modify them.
REM
C:
CD C:\WINDOWS
CALL C:\WINDOWS\COMMAND.COM
C:\WINDOWS\WIN.COM/WX
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ~~~~
CONTENTS OF THE CONFIG.SYS FILE:
@ECHO OFF
@ECHO OFF
REM To make a DOS Boot Diskette; See the file
C:\DOSBOOT\DOSBOOT.TXT
set path=c:\windows\command
c:\windows\smartdrv/q
LH c:\mouse\cloaking
c:\mouse\mouse ps2
SET PROMPT=&p&g
SET TEMP=C:\windows\TEMP
SET TMP=C:\windows\TEMP
SET BLASTER=A220 I5D1 T2
REM Set the Audio card
C:\WINDOWS\CWDINIT.EXE/A
Rem DOS Sound Mixer Program. Preset CD Volume to ON.
C:\windows\Cwdmix/M=9,9/W=13,13/C=13,13/L=13,13/X=1/F=15,1
5
/I=X
REM
REM The following lines have been created by Windows. Do
not modify them.
REM
C:
CD C:\WINDOWS
CALL C:\WINDOWS\COMMAND.COM
C:\WINDOWS\WIN.COM/WX
DOS=SINGLE
REM To make a DOS Boot Diskette; See the file
C:\DOSBOOT\DOSBOOT.TXT
REM Configure the PNP devices
device=c:\icu\dwcfgmg.sys
DOS=HIGH,UMB
buffershigh=1-
fcbshigh=4
fileshigh=30
lastdrivehigh=Z
stackshigh=9,256
Device=C:\WINDOWS\Himem.Sys/testmemff
rem The following line will get you more ram, but noEMS
rem Device=C:\WINDOWS\Emm.386.exe RAM NOEMS
Device=C:\WINDOWS\Emm386.exe RAM
DEVICEHIGH=c:\cdrom\Oakcdrom.sys/D:IDECDOOO
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ~~~~~~
this is of course, all greek to me. however, her files
are drastically different from mine.
i have win98se on a packard-bell, and winxp on a compaq.
config.sys has nothing at all in either system.
autoexec.bat on the packard-bell/win98se has one line.
autoexec.bat on the compaq/winxp has 7 very short lines.
thanks for your help. i'll be looking forward to your
diagnosis.
.