Awesome! Thanks for the feedback.

PattyL

"Bill M." wrote in message
news
Thank you PattyL

Your information was very helpfull. Unfortunately this very inexpensive
Flash Drive had no instructions in the Box; no Web site address and no
READ
ME in the files. Not knowing all the various methods for installing
Drivers
makes it hard for us novices. Your detailed explanation helped a lot and
the
Flash Drive does work very nicely.

Glad there is a helping hand out there.



"PattyL" wrote:

Inf files can be very important but not necessarily. You don't mention
the
name of the inf file and sometimes, it's purpose is simply to run the
setup
that you say you ran manually. Othertimes, the inf file contains the
information that Windows needs to install the driver correctly.

Your device should have come with at least a readme type file with
instructions on installing the device. How each device is installed
depends
a lot on how the manufacturer decided to write the installation files.
In
some cases, you must run the installation before connecting the device
and
in others, you must connect the device and then run the installation.
With
USB devices, it's more common to install the device before connecting it.

Try booting into Safe mode, then go to Control Panel, System, Device
Manager
and remove any devices that show up here with a ? or a red X, and any
listed
under Other. Exit Device Manager and say "no" to rebooting and then Exit
and Shutdown Windows. After a few seconds, turn the system back on.
Right-click on the inf file and choose Edit to see what's in it. If it
is
an Autorun.inf then it's probably not important but if it has driver
information, then you will want to point the installer at this disk when
it
says it can't find the driver. Also check the disk to see if there are
one
or more folders. The correct inf file might be in a folder and not in
the
root.

Once you have determined where the required inf file is (if it exists),
run
the setup again and when asked for the drivers, say Have Disk and then
browse to the inf file with the driver information.

This article might also be helpful:

General USB Troubleshooting in Windows 98, Windows 98 Second Edition, and
Windows Me
http://support.microsoft.com/?kbid=263218

PattyL




"Bill M." wrote in message
...
I have Win 98SE and am trying to install Drivers for a USB Flash Disk.
Product name Rundisk has no support site . The included floppy has the
setup.ex and an inf file. I have completed the setup.ex and it tells me
drivers are loaded. I DID NOT do anything with the inf file. When the
USB
Flash is plugged in (the first time) a New Device Wizzrd came up and
could
not find the proper driver. On a second attempt at the wizzard did not
appear
at all. I am obviously missing something (or the Floppy is a dud). Can
someone direct me to the correct method to instll Drivers ? Is the inf
file
crucial to Windows finding the driver ? Any help would be great.

Bill M.