View Single Post
  #1  
Old January 16th 06, 11:27 AM posted to microsoft.public.windowsme.networking
external usenet poster
 
Posts: n/a
Default Problem browsing thorugh router over ADSL with ME

Hi to all!

I have:

PC1: WinXPpro
PC2: WinME

ROUTER D-Link DI-624 (with WiFi)
ADSL Modem connected to one ISP (Telecom Italia, here in Italy)

The Modem is connected to the router by one ethernet cable.
The router is connected to PC1 through a wireless connection. I can
access the internet, browse and everything for hours from PC1 with no
substantial problems.

The router is connected to PC2 (WinME) through one ethernet cable.

From PC2 I can PING the internet but only with numerical addresses. I
cannot PING site's names. I cannot browse (both with IE and with
Firefox) either by names or by numerical addresses.

Before I bought the router PC2 was connected to the same ADSL modem by
ethernet cable and I had Enternet300 installed (PC1 didn't exist).
Then I unistalled this software (as it was suggested in the booklet
coming with the router) and now I am in this situation.

I have to say that in the meantime I played around a lot unistalling
firewalls I had on PC2 (ZA+ other stuff) and perhaps I did something
wrong.

I list here below the result of IPCONFIG /all from both PC1 and PC2:

IPCONFIG /all from PC1 (under WinXP, conncetion and browsing are OK)

%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%

Windows IP Configuration

Host Name . . . . . . . . . . . . : andreav
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Unknown
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No

Ethernet adapter Local Area Connection:

Media State . . . . . . . . . . . : Media disconnected
Description . . . . . . . . . . . : 3Com EtherLink XL 10/100
PCI TX
NIC (3C905B-TX)
Physical Address. . . . . . . . . : 00-10-4B-4B-4A-80

Ethernet adapter Wireless Network Connection:

Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : D-Link AirPlus Xtreme G
DWL-G132
Wireless USB Adapter(rev.A)
Physical Address. . . . . . . . . : 00-13-46-78-80-4D
Dhcp Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
IP Address. . . . . . . . . . . . : 192.168.0.100
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 192.168.0.1
DHCP Server . . . . . . . . . . . : 192.168.0.1
DNS Servers . . . . . . . . . . . : 192.168.0.1
Lease Obtained. . . . . . . . . . : venerd́ 13 gennaio 2006
16.00.35
Lease Expires . . . . . . . . . . : venerd́ 20 gennaio 2006
16.00.35

%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%


IPCONFIG /ALL for PC2 (under WinME) from which I can PING the world
but I cannot browse ("page not found" is the result of any attempt,
even when I try to connect to the numerical address of the router to
access its configuration menu, which, on the other end, works
perfectly from the other machine) I am sorry that the IPCONFIG
messages are in Italian, here. Anyway: SI means YES and NO means NO.

%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%


Configurazione IP di Windows

Nome host . . . . . . . . . : MAUVIA
Server DNS. . . . . . . . . : 192.168.0.1
Tipo nodo . . . . . . . . . : Trasmissione
ID Scope NetBIOS. . . . . . :
IP Routing abilitato. . . . : No
WINS Proxy abilitato. . . . : No
Risoluzione NetBIOS con DNS : SI

0 Scheda Ethernet :

Descrizione . . . . . . . . : Intel 8255x-based Integrated Fast
Ethernet
Indirizzo fisico. . . . . . : 00-00-E2-3C-F3-26
DHCP abilitato. . . . . . . : SI
Indirizzo IP. . . . . . . . : 192.168.0.101
Subnet Mask . . . . . . . . : 255.255.255.0
Gateway predefinito . . . . : 192.168.0.1
Server DHCP . . . . . . . . : 192.168.0.1
Server WINS primario. . . . :
Server WINS secondario. . . :
Assegnazione indirizzo. . . : 13 01 06 19.00.47
Scadenza indirizzo. . . . . : 20 01 06 19.00.47

1 Scheda Ethernet :

Descrizione . . . . . . . . : PPP Adapter.
Indirizzo fisico. . . . . . : 44-45-53-54-00-00
DHCP abilitato. . . . . . . : SI
Indirizzo IP. . . . . . . . : 0.0.0.0
Subnet Mask . . . . . . . . : 0.0.0.0
Gateway predefinito . . . . :
Server DHCP . . . . . . . . : 255.255.255.255
Server WINS primario. . . . :
Server WINS secondario. . . :
Assegnazione indirizzo. . . :
Scadenza indirizzo. . . . . :

%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%

This is the way the router is setup:


ROUTER D-Link DI-624:

%%%%%%%%%%%%%%%%%%%%%%%%%%%

The IP addres of the DI-624
IP address 192.168.0.1
Subnet mask 255.255.255.0

Wan settings

PPPoE
Dynamic PPPoE
Primary DNS (empty)
Secondary DNS (empty)
Max Idle time 5 minutes
MTU 1492

DHCP server enabled

%%%%%%%%%%%%%%%%%%%%%%%


Obviously, I asked many people with no useful progress. I also tried
to play around with DNS addresses in many ways but the result is
always the same: I can PING (numerically) but I cannot browse (both
numerically and by names). I add that I am not interested in
connecting the two machines (for transer of files ecc.) All I want is
to have both of them to access the internet.

Thanks to all!

Maurizio