Thread: Data recovery?
View Single Post
  #7  
Old November 26th 06, 10:44 PM posted to microsoft.public.windowsme.general
Tim O via WindowsKB.com
External Usenet User
 
Posts: 9
Default Data recovery?

Because GoBack appears on a startup screen I assume that the GoBack program
was in use. Do I use GoBack to get at the files?

Fdisk can see both drives. I do not have the computer with me right now so I
can't be sure but I believe it says FAT32 if that's possible for a filling
system for both drives.

Thanks,
Tim

Mike M wrote:
If a drive is present and correct in the Device Manager yet allocated no
drive letter this is normally indicative of one of the following:
Either the drive is not partitioned or formatted or that it is formatted
to use a filing system not recognised by Win Me such as the NTFS filing
system.
Was the drive previously used with a program such as GoBack as this
changes the file system flag so that partition(s) on the drive are only
accessible via GoBack.

Boot into Win Me and open a DOS window and run FDISK - alternatively boot
to DOS using a Win Me boot floppy and enter FDISK at the DOS prompt. When
prompted click Y for large disk support. Can FDISK see two drives (if yes
there is an option to change drive)? For each drive what does "Display
Partition Information" tell you. If FDISK sees your second drive how does
it say it is partitioned and what filing system does it say is in use on
each of those partitions?
I haven't blocked access to drive letters beyond C using a tool such
as TweakUI.

[quoted text clipped - 23 lines]
I can see both drives in the device manager.
Windows ME was the previous operating system.


--
Message posted via WindowsKB.com
http://www.windowskb.com/Uwe/Forums....neral/200611/1