Hi Noel
Thanks so much for your help, I rebooted using the Start
Up disk and did the SCANREG/FIX - problem solved, it went
through a registry clean up and fixed the problem. Your
assistance was greatly appreciated.
Cheers from Down Under
Peter
-----Original Message-----
I suspect that you may have either a corrupted registry,
or some recent
virus infection - although it could also be the result of
timing problems
loading drivers, or faulty RAM.

First - boot to DOS using your Startup disk
at the A:\ prompt type
SCANREG /FIX
and hit [Enter]
the system will reboot - remove the floppy as it does so,
so that it can
boot to Windows

If that doesn't help, then download on a known-clean
system, a copy of
F-Prot for DOS (www.f-prot.com) create the disks, and
boot using them,
running a full scan of all files on the HD - see what it
reports

If that doesn't help, then try cleaning up your startup
axis
look here for instructions on how to clean up your
startup axis, preventing
unnecessary programs loading
http://www.pacs-portal.co.uk/startup_content.php

Check out you RAM using Docmemory from
www.simmtester.com - run it
overnight, and see what it reports.

Post back with your results.
--
Noel Paton (MS-MVP 2002-2004, Win9x)

Nil Carborundum Illegitemi
http://www.btinternet.com/~winnoel/millsrpch.htm

Please read http://dts-l.org/goodpost.htm on how to post
messages to NG's
or
http://www.microsoft.com/presspass/f...2001/Mar01/Mar
27pmvp.asp
"peter" wrote in message
...
Hi
On start up I get these messages:
0028:C001D792 in VxD NDIS(01)
0028:C023F58B in VxD VMN (OC)

After a few restarts the problem rectifies itself and
the
system operates fine, until I shutdown and restart again
later...this could take 3 or 4 restarts before system is
normal. It is very frustrating. It only started
happening
after I downloaded virus protection updates (using Panda
Platinium)
Any help would be much appreciated
Cheers
Peter


.