Can you tell me briefly how to turn off DHCPand adding a static IP address.
I assume it's thru the Network settings in control panel. Thanks. Steve

"mdp" wrote in message
...
I've shortened boot time considerably on Win98 by turning DHCP off and
setting a static IP. Home networks typically use 192.168.0.X (pick X).
Be
aware that whatever the NIC is connected to (e.g. router, modem, etc) may
also need to be properly configured.

"Steve L" slupardi at comcast dot net wrote in message
...
Last week I fooled with my LinkSys LNE100 network card. Now WIN98 (1st
edition) boots very slow. It stays on the blank desktop for over 2
minutes, then the icons start to load and everything goes as normal. I
reinstalled the network card drivers several times, did updated NAV
scans,
spyware checks etc. A boot log analysis shows Ndis2sup.vxd failed (but I
read that's normal). This is not a
ram problem or such. There must be some setting or conflict with
something.
I suspect that windows is having a hard time finding something (like a
network ) at start up. Any ideas, either network or other? Thanks.

Steve L