View Single Post
  #3  
Old July 29th 04, 05:39 PM
george
external usenet poster
 
Posts: n/a
Default internet connection sharing

See inline comments:
-----Original Message-----
In article 358e01c471c7$e5cbb620

, "george"
wrote:
Two computers connected to a router and dsl service.
Tried the steps below for both computers.
I cannot enable sharing on either computer.
Going to control panel - add/remove programs - windows
setup - internet tools - details -
When I place a check-mark at internet connection

sharing,
click ok, ok and the programs are loaded, then the
internet connecting sharing wizard opens.

Problem - the wizard cannot find the nic or a usb

network
device (one computer has a nic the other the usb device,
it only finds the internal modem card. BTW both

computers
can access the net successfully.

How can I tell the wizard to use the network device (or

do
I let it use the modem and change the 'connection'
somewhere else?) And exactly HOW do I change the
connection setting from the modem to the network device?

If I exit the wizard and restart the computer the check-
mark on the "internet connection sharing" has been
removed, and there is no 'network neighborhood'.

How do I enable the network neighborhood?

I tried sharing using the control panel - network -
client for microsoft networks - file and printer

sharing
but that does not enable the 'network neighborhood'

either.

Enabling Internet Connection Sharing is only necessary

when the
Internet (DSL modem, cable modem, etc) connects directly

to a
computer. That doesn't apply to your setup, because the

Internet
connects to the router's WAN (Internet) port, not to a

computer. The
router will share the DSL connection with both computers.


**
Not talking about computers 'sharing' the modem - I want
to share files and printers between computers.
**

If you've installed ICS, un-install it. Configure both

computers'
network connections to obtain an IP address

automatically, and the
router's built-in DHCP server will take care of all the

settings.


**
What is ICS? Computers are set to automatically get IPs.
**

To enable Network Neighborhood, try these steps, in

order. If one
doesn't fix the problem, go on to the next one:

1. Go to Control Panel. If Tweak UI is present, double

click it. On
the Desktop tab, put a check mark in the Network

Neighborhood box,
click Apply and OK.


**
Network Neighborhood WAS already checked.
**


2. Go to Control Panel | Network. Remove Client for

Microsoft
Networks if it's present. Then add Client for Microsoft

Networks.
Reboot.


**
Had already done that several times with same result - no
neighborhood.
**

3. There could be a system policy hiding Network

Neighborhood. Run
the registry editor, open this key:

HKEY_CURRENT_USER\Software\Microsoft\Windows\Curr entVersio

n\Policies\Explorer

Delete the value named "NoNetHood". Reboot.


**
It was there, I deleted it and rebooted - same result, no
NN.

What now??
**

--
Best Wishes,
Steve Winograd, MS-MVP (Windows Networking)

Please post any reply as a follow-up message in the news

group
for everyone to see. I'm sorry, but I don't answer

questions
addressed directly to me in E-mail or news groups.

Microsoft Most Valuable Professional - Windows Networking
http://mvp.support.microsoft.com

Steve Winograd's Networking FAQ
http://www.bcmaven.com/networking/faq.htm
.