View Single Post
  #27  
Old September 15th 09, 12:38 AM posted to microsoft.public.win98.gen_discussion,microsoft.public.win98.setup
PCR
External Usenet User
 
Posts: 4,396
Default How to fix the bootup screen logo after running setup

Franc Zabkar wrote:
On Sat, 12 Sep 2009 22:24:27 -0400, "PCR" put
finger to keyboard and composed:

Franc Zabkar wrote:


Is it possible that the Compaq logo is patched into the BIOS? Modern
motherboards (eg Asus, Gigabyte) are supplied with utilities that
allow users to add their own logos and backgrounds to the BIOS.


Well, it is a Compaq BIOS, & I've even flashed it with a Compaq
download. That never occurred to me, but I guess it is possible. The
flash is... System ROM Family: 686S4; System ROM Date: 7/25/00. I have
no such utility for my BIOS.


These are the modules in my BIOS:
http://www.users.on.net/~fzabkar/L7S...OS/MODULES.TXT

I believe that the "Small OEM Logo" is the "Green" logo.


That sounds like a possibility. And that is your startup screen? I have
no way to look into my own BIOS.

This is a dump of my AMI BIOS:
http://www.users.on.net/~fzabkar/L7S7A2/BIOS/L7S7A2.RPT

These are the binary modules that were extracted from the compressed
image:
http://www.users.on.net/~fzabkar/L7S7A2/BIOS/

Gigabyte "Face-Wizard":

http://www.gigabyte.com.tw/FileList/...facewizard.htm

"Face-Wizard™ allows user to select BIOS on board or file in hard
drive/floppy disk/zip/MO or other storage devices and combine the
compatible picture you prefer into BIOS. And not only this,
Face-Wizard™ also helps user to update BIOS in Windows mode."


That sounds scary to me. I wouldn't want to make it impossible to boot.
Of course, I do have my BIOS on a floppy ready to flash again if
necessary. But really -- if anything -- I'd just want that COMPAQ screen
to disappear, not to replace it. I'd want to see whether anything shows
up under it. Putting Logo=0 into MSDOS.sys had no effect. There never
was an MS bootup screen that I can recall-- & it doesn't prevent the
big, red COMPAQ!

I should put a Logo.sys into C:/ (I have one elsewhere) & set Logo=1 to
see what happens. But I can swear the one in IO.sys never showed back
when I had no Logo=0.

Well, looking inside IO.sys, I do see...
0003 5F20 00 00 43 4F 4D 50 41 51 00 00 54 4F 53 48 49 42
...COMPAQ..TOSHIB

....So, it's possible that was altered. OK, I've set it to show Logo.sys
& will report back next boot.

Asus MyLogo Series:
http://www.asus.com/999/html/events/mb/mylogo.htm

"With the MyLogo Series, you can download your favorite image from
Windows into the BIOS Flash ROM, providing a fast, convenient way to
'decorate' your system."


That actually looks nice, but I'd fear it weren't compatible with this
Compaq.

- Franc Zabkar


--
Thanks or Good Luck,
There may be humor in this post, and,
Naturally, you will not sue,
Should things get worse after this,
PCR