Thread: ME Installation
View Single Post
  #4  
Old October 1st 08, 10:17 PM posted to microsoft.public.windowsme.setup
Mike M
External Usenet User
 
Posts: 2,047
Default ME Installation

PCI System Management Bus
PCI Universal Serial Bus


For these two you need to install the chipset driver for the motherboard.
Establish which motherboard your system has, either by opening the box or
by reference to the system manufacturer's web site and then download and
install the appropriate drivers if you don't have a CD containing them
that came with the PC.

PCI Card


This could be anything. You can help narrow down by checking what's
missing, starting with video, audio and network although each of those
three is usually more specifically identified. Once you've established
which card is missing and needs drivers, download the required drivers
from the manufacturer's web site.
--
Mike Maltby



Derek wrote:

Thanks for your help Mart. I have tried as you suggested and here's
where I am at on it. I can get into safe mode and into Dev.Man and
remove the errors under the question marks but it does not solve the
problem and when I reboot and enter safe mode again the following
errors continue to reappear:

PCI Card
PCI System Management Bus
PCI Universal Serial Bus

I tried physically removing what looks to be a modem from the PCI
card but it didn't change my results which is to always return to ME
setup then get frozen out. I can't install any drivers because I
can't do it in safe mode and my keyboard and mouse are frozen in the
setup. For the same reason I can't install or reformat anything at
all. Wondering if this is a hardware problem with my motherboard or
a software problem with my drivers and if there are any other
solutions that I could try.