There isn't one. Because the printer is not a USB printer. That simple.
You have already started a conversation in the Win98.Networking group. Let's
just continue it there, OK?
--
Gary S. Terhune
MS-MVP Shell/User
http://grystmill.com
"885WHITE" wrote in message
...
This link so take you to the question I asked and the subsequent answers:
http://forums.microsoft.com/technet/...postid=3610271
Would you tell me where on it's site that Epson offered a USB driver and
adapter?
Would that attach to the printer itself and then attach to a usb port. If
it
did that might solve the whole problem.
Thank you
--
885WHITE
"MEB" wrote:
If you could give a short explanation of what you tried/attempted as the
fixes [via the VISTA group or otherwise] it might help us determine
potential fixes.
NOTE though, that VISTA was essentially designed NOT to network with 9X.
So
something's work like a charm, and others just seem to fail no matter
what
you do. Key though, is the SHARING, USER, and PASSWORD settings on the
computers in addition to the normal firewall and other settings.
It may be possible to obtain a generic printer port to USB adapter to
temporarily or permanently connect the printer to the VISTA machine. Once
done the printer could then be returned [if you wanted] back to the 9X
system, and the port then changed on the VISTA machine to point to the 9X
printer. Epson offered a USB driver and adapter.
Another option is to use an actual print server.
An obvious question would be:
Did you attempt to install the printer driver into VISTA?
*IF* VISTA can see the shared printer when attached to the 9X box, then
you
may be able to force an installation by using the XP compatible driver on
the installation disk [or via the Epson download link]. Attempting to use
the included VISTA default drivers will likely not work as they require
[generally] an attached device and do not contain all the "old" printer
aspects.. NOTE: VISTA requires some additional setup to network with 9X,
so
make sure you understand and follow the procedures. also make sure you
have
the firewall{s} setup properly for the local network
*Epson has its own spooler and de-spooler*, which is used during print
queues [local and network]. In the setup/settings for the printer, you
can
define which spooler it uses, its own or Windows/DOS, and the directory
which it monitors/uses. *IF* you play around with the port and spooler
settings you MAY be able to get it to print by setting the printer to
query/monitor the VISTA spooler and/or port OR reversed in VISTA. During
the
installation process [in 9X and XP, so likely VISTA as well] you should
have
had the option to pre-setup the network printer.
The Epson also has a Status Monitor. The Network Printers list displays
information on printers that are connected to a network. This list is
only
available when the Network Printer Monitoring option is set to Monitor in
the EPSON Status Monitor 2 Setup program. Run Setup again to change this
setting.
See here for some additional help and information on the 660:
http://www.epson.com/cgi-bin/Store/s...egory=Products
For VISTA:
http://www.vistax64.com/archive/f-27-p-17.html - check some of the linked
discussions on spoolers and printers.
http://www.vistax64.com/vista-networ...ista-98-a.html
General:
http://www.google.com/search?hl=en&q...98&btnG=Search
--
MEB
http://peoplescounsel.orgfree.com
--
_________
"885WHITE" wrote in message
...
| I have a new Dell laptop with Vista on it I can access the files on my
old
| Windows SE Destop through my home network via a wireless connection
through a
| wired Netgear Router. My old laptop (which died) used Win XP and I
could
use
| the Epson printer (connected to Win98SE machine via LPT)to print. The
Vista
| system see's the Epson Printer when I want to add it as a network
printer
but
| it won't let me add it as it keeps showing an error code: Cannot
connect
to
| the printer: error 0x00000866. The files and printer are shared
through
| the network . The printer is not USB as it is an Epson Color 660 and
uses
| LPT.
| I have tried the Epson site but they refer to physically attaching my
LPT
| printer to the laptop so that Vista will automatically install the
drivers.
| Since there are no LPT ports on the laptop that is not possible.
| I tried the : Vista forum but eventually was referred here as there was
not
| a solution through Vista.
| Does anyone have any advice short of buying a new desktop and printer?
|
|
|
|
|
| --
| 885WHITE