|
|
'USBNTMAP.SYS' and 'USBSTOR.SYS' not found
I am trying to use my memory stick in my USB but it is not letting me use it
because the following files are not found. Is there anyway to download these files??? |
'USBNTMAP.SYS' and 'USBSTOR.SYS' not found
When it asks for usbntmap.sys and usbstor.sys files, you need to browse
(navigate) to the C:Windows\Options\Instal or CABS folder, where there *should* be a complete copy of your WinMe Setup files and the installation of the USB files should then continue. (The folder which you should be looking for [Instal or CABS] is the one containing a whole series of .cab files - including BASE2.CAB which contains the two required files.) Mart "ScarlemsFinest" wrote in message ... I am trying to use my memory stick in my USB but it is not letting me use it because the following files are not found. Is there anyway to download these files??? |
'USBNTMAP.SYS' and 'USBSTOR.SYS' not found
To quote Mike M....
usbntmap.sys is with most other usb related files in the "cab" files in the Win9x folder on the Win Me CD and/or in a sub-folder of Windows\Options and not directly visible in Explorer. Look for the folder containing the file BASE2.CAB. When the installer asks for files point it towards the folder containing the cab files. See MS KB 265371 - "How to Extract and Replace a Protected File in Windows Me" (http://support.microsoft.com?kbid=265371) for details of how to manually extract files from the cab set. Alternatively use MSConfig | General | Extract File... and follow the prompts to extract a new copy of the required files to your windows\system32\drivers folder . Most USB related files can be found in BASE2.CAB although some are located in other cabs. Alternatively you could visit http://www.usb-drivers.com/drivers/63/63237.htm and download usb-WinMe.exe which contains WinMe's usb related files. Extract the files you want and put them in windows\system32\drivers. -- Noel Paton (MS-MVP 2002-2006, Windows) Nil Carborundum Illegitemi http://www.crashfixpc.com/millsrpch.htm http://tinyurl.com/6oztj Please read http://dts-l.org/goodpost.htm on how to post messages to NG's "ScarlemsFinest" wrote in message ... I am trying to use my memory stick in my USB but it is not letting me use it because the following files are not found. Is there anyway to download these files??? |
'USBNTMAP.SYS' and 'USBSTOR.SYS' not found
Mart, u r the best, thanks for the help, everything's solved. Thanks again!!!
"Mart" wrote: When it asks for usbntmap.sys and usbstor.sys files, you need to browse (navigate) to the C:Windows\Options\Instal or CABS folder, where there *should* be a complete copy of your WinMe Setup files and the installation of the USB files should then continue. (The folder which you should be looking for [Instal or CABS] is the one containing a whole series of .cab files - including BASE2.CAB which contains the two required files.) Mart "ScarlemsFinest" wrote in message ... I am trying to use my memory stick in my USB but it is not letting me use it because the following files are not found. Is there anyway to download these files??? |
'USBNTMAP.SYS' and 'USBSTOR.SYS' not found
You're welcome SF - glad it worked for you and thanks for the confirmation.
Mart "ScarlemsFinest" wrote in message ... Mart, u r the best, thanks for the help, everything's solved. Thanks again!!! "Mart" wrote: When it asks for usbntmap.sys and usbstor.sys files, you need to browse (navigate) to the C:Windows\Options\Instal or CABS folder, where there *should* be a complete copy of your WinMe Setup files and the installation of the USB files should then continue. (The folder which you should be looking for [Instal or CABS] is the one containing a whole series of .cab files - including BASE2.CAB which contains the two required files.) Mart "ScarlemsFinest" wrote in message ... I am trying to use my memory stick in my USB but it is not letting me use it because the following files are not found. Is there anyway to download these files??? |
'USBNTMAP.SYS' and 'USBSTOR.SYS' not found
"Mart" wrote: When it asks for usbntmap.sys and usbstor.sys files, you need to browse (navigate) to the C:Windows\Options\Instal or CABS folder, where there *should* be a complete copy of your WinMe Setup files and the installation of the USB files should then continue. (The folder which you should be looking for [Instal or CABS] is the one containing a whole series of .cab files - including BASE2.CAB which contains the two required files.) Mart "ScarlemsFinest" wrote in message ... I am trying to use my memory stick in my USB but it is not letting me use it because the following files are not found. Is there anyway to download these files??? |
'USBNTMAP.SYS' and 'USBSTOR.SYS' not found
You're quite right Debbie, I did write it - on 19th of April 2006 to be
precise - and "ScarlemsFinest" replied :- Mart, u r the best, thanks for the help, everything's solved. Thanks again!!! Hope that helps. Mart "Debbie" wrote in message ... "Mart" wrote: When it asks for usbntmap.sys and usbstor.sys files, you need to browse (navigate) to the C:Windows\Options\Instal or CABS folder, where there *should* be a complete copy of your WinMe Setup files and the installation of the USB files should then continue. (The folder which you should be looking for [Instal or CABS] is the one containing a whole series of .cab files - including BASE2.CAB which contains the two required files.) Mart "ScarlemsFinest" wrote in message ... I am trying to use my memory stick in my USB but it is not letting me use it because the following files are not found. Is there anyway to download these files??? |
'USBNTMAP.SYS' and 'USBSTOR.SYS' not found
"ScarlemsFinest" wrote: I am trying to use my memory stick in my USB but it is not letting me use it because the following files are not found. Is there anyway to download these files??? |
'USBNTMAP.SYS' and 'USBSTOR.SYS' not found
They are very probably in one of the CAB folders on your WindowsME, but
mine is down at the moment and I can't help you. Wait until the gurus in England arise and they will know which one. I ran into the same problem with my camera, so I do know they are there. Cheers.....Heather "doublesteel" wrote in message ... "ScarlemsFinest" wrote: I am trying to use my memory stick in my USB but it is not letting me use it because the following files are not found. Is there anyway to download these files??? |
'USBNTMAP.SYS' and 'USBSTOR.SYS' not found
If this is causing "doublesteel" a problem, then here is a copy of my
original reply to "ScarlemsFinest" from w-a-y back (April 2006) :- "When it asks for usbntmap.sys and usbstor.sys files, you need to browse (navigate) to the C:Windows\Options\Instal or CABS folder, where there *should* be a complete copy of your WinMe Setup files and the installation of the USB files should then continue." Mart "Heather" wrote in message ... They are very probably in one of the CAB folders on your WindowsME, but mine is down at the moment and I can't help you. Wait until the gurus in England arise and they will know which one. I ran into the same problem with my camera, so I do know they are there. Cheers.....Heather "doublesteel" wrote in message ... "ScarlemsFinest" wrote: I am trying to use my memory stick in my USB but it is not letting me use it because the following files are not found. Is there anyway to download these files??? |
'USBNTMAP.SYS' and 'USBSTOR.SYS' not found
|
'USBNTMAP.SYS' and 'USBSTOR.SYS' not found
I have taken these steps, and it said I had successfully installed the
hardware (USB 2.0 Flash Drive), but it does not show up as an available drive in My Computer. "Mart" wrote: When it asks for usbntmap.sys and usbstor.sys files, you need to browse (navigate) to the C:Windows\Options\Instal or CABS folder, where there *should* be a complete copy of your WinMe Setup files and the installation of the USB files should then continue. (The folder which you should be looking for [Instal or CABS] is the one containing a whole series of .cab files - including BASE2.CAB which contains the two required files.) Mart "ScarlemsFinest" wrote in message ... I am trying to use my memory stick in my USB but it is not letting me use it because the following files are not found. Is there anyway to download these files??? |
'USBNTMAP.SYS' and 'USBSTOR.SYS' not found
Jeepers! Nancy, wherever did you dig that thread from - it's over two years
old. Firstly, although your USB Flash Drive is USB 2.0, it will only perform at USB 1.x speeds as the WinMe drivers mentioned are for USB 1.x only. You will need extra hardware AND drivers (associated with that hardware) for it to work at USB 2.0 speeds under WinMe. However, back to your prime issue - drive not showing. Are you sure that the memory stick was properly formatted (Does it work [is it recognised] on another (e.g. XP) machine?) Also, take a look in Device Manager and see if any USB devices (or errors) are shown there. Do you have TweakUI installed? If so, you *may* have set a restriction on the available drive letters. Perhaps you might wish to try this little MS utility for checking-out your USB stuff. If you have a copy of the Win98 CD, then see the following URL and try the usbview.exe on the CD. (NB It's not on the WinME CD - but see below) "How to Use the Windows 98 USB Device Viewer Utility" http://support.microsoft.com/default...b;en-us;272584 You can download usbview.exe from MS at: ftp://ftp.microsoft.com/services/tec...SE/USBVIEW.EXE Alternatively, it still seems to be available from :- http://www.srigc.com/softdl.htm You'll find it about 2/3 rds down the page If all this fails, try a System Restore and roll-back to before you first plugged-in your USB stick. Then start over and make an exact note of all screen reports. HTH and good luck Mart "Nancy" wrote in message ... I have taken these steps, and it said I had successfully installed the hardware (USB 2.0 Flash Drive), but it does not show up as an available drive in My Computer. "Mart" wrote: When it asks for usbntmap.sys and usbstor.sys files, you need to browse (navigate) to the C:Windows\Options\Instal or CABS folder, where there *should* be a complete copy of your WinMe Setup files and the installation of the USB files should then continue. (The folder which you should be looking for [Instal or CABS] is the one containing a whole series of .cab files - including BASE2.CAB which contains the two required files.) Mart "ScarlemsFinest" wrote in message ... I am trying to use my memory stick in my USB but it is not letting me use it because the following files are not found. Is there anyway to download these files??? |
'USBNTMAP.SYS' and 'USBSTOR.SYS' not found
Mike, that thought did go thru' my mind when I mentioned XP g
Mart "Mike M" wrote in message ... In addition to Mart's suggestions if the flash drive appears in the Device Manager but doesn't show in Windows Explorer check that the USB Flash Drive is formatted as either FAT or FAT32 and hasn't been formatted as NTFS. -- Mike Maltby |
'USBNTMAP.SYS' and 'USBSTOR.SYS' not found
Mart wrote:
Mike, that thought did go thru' my mind when I mentioned XP g Mart, and it was your reference to XP ... vbg -- Mike |
'USBNTMAP.SYS' and 'USBSTOR.SYS' not found
Thanks to you both for your suggestions. Unfortunately, none of this really
did the trick, but I discovered by accident that my computer recognized the flash drive after I rebooted without removing it -- go figure! I was just trying to pull a music folder off an old machine, and I finally succeeded, so no need to try further to resolve the problem, but I appreciate your support just the same. Nancy "Mart" wrote: Mike, that thought did go thru' my mind when I mentioned XP g Mart "Mike M" wrote in message ... In addition to Mart's suggestions if the flash drive appears in the Device Manager but doesn't show in Windows Explorer check that the USB Flash Drive is formatted as either FAT or FAT32 and hasn't been formatted as NTFS. -- Mike Maltby |
'USBNTMAP.SYS' and 'USBSTOR.SYS' not found
Hmm.. not exactly unheard of. Sometimes WinMe can be somewhat 'sluggish' in
enumerating (recognising) certain USB devices for the first time and a re-boot has been known to help kick it where it needs to. Anyway, well done Nancy, I'm pleased you've now got yourself sorted out and thanks for the feedback - enjoy your music. Mart "Nancy" wrote in message ... Thanks to you both for your suggestions. Unfortunately, none of this really did the trick, but I discovered by accident that my computer recognized the flash drive after I rebooted without removing it -- go figure! I was just trying to pull a music folder off an old machine, and I finally succeeded, so no need to try further to resolve the problem, but I appreciate your support just the same. Nancy "Mart" wrote: Mike, that thought did go thru' my mind when I mentioned XP g Mart "Mike M" wrote in message ... In addition to Mart's suggestions if the flash drive appears in the Device Manager but doesn't show in Windows Explorer check that the USB Flash Drive is formatted as either FAT or FAT32 and hasn't been formatted as NTFS. -- Mike Maltby |
'USBNTMAP.SYS' and 'USBSTOR.SYS' not found
Yes Mike, I know and I nearly chopped my fingers off when I realised - the
spectre of a 'simple solution' - or at least a description of its implementation - could have ended up as a multi-page tome. XP just isn't interested g Mart "Mike M" wrote in message ... Mart wrote: Mike, that thought did go thru' my mind when I mentioned XP g Mart, and it was your reference to XP ... vbg -- Mike |
'USBNTMAP.SYS' and 'USBSTOR.SYS' not found
It was exactly what I needed, too!
"Mart" wrote: When it asks for usbntmap.sys and usbstor.sys files, you need to browse (navigate) to the C:Windows\Options\Instal or CABS folder, where there *should* be a complete copy of your WinMe Setup files and the installation of the USB files should then continue. (The folder which you should be looking for [Instal or CABS] is the one containing a whole series of .cab files - including BASE2.CAB which contains the two required files.) Mart "ScarlemsFinest" wrote in message ... I am trying to use my memory stick in my USB but it is not letting me use it because the following files are not found. Is there anyway to download these files??? |
'USBNTMAP.SYS' and 'USBSTOR.SYS' not found
In which case, I guess that you mean the solution worked ok for you, also.
Thanks for the feedback. Mart "DLSmith29" wrote in message ... It was exactly what I needed, too! "Mart" wrote: When it asks for usbntmap.sys and usbstor.sys files, you need to browse (navigate) to the C:Windows\Options\Instal or CABS folder, where there *should* be a complete copy of your WinMe Setup files and the installation of the USB files should then continue. (The folder which you should be looking for [Instal or CABS] is the one containing a whole series of .cab files - including BASE2.CAB which contains the two required files.) Mart "ScarlemsFinest" wrote in message ... I am trying to use my memory stick in my USB but it is not letting me use it because the following files are not found. Is there anyway to download these files??? |
'USBNTMAP.SYS' and 'USBSTOR.SYS' not found
C:Windows\Options\Instal or CABS folder
^^^^^^^ Hi Mart, In C:\Windows there is no folder with the name Options. "Mart" wrote: When it asks for usbntmap.sys and usbstor.sys files, you need to browse (navigate) to the C:Windows\Options\Instal or CABS folder, where there *should* be a complete copy of your WinMe Setup files and the installation of the USB files should then continue. (The folder which you should be looking for [Instal or CABS] is the one containing a whole series of .cab files - including BASE2.CAB which contains the two required files.) Mart "ScarlemsFinest" wrote in message ... I am trying to use my memory stick in my USB but it is not letting me use it because the following files are not found. Is there anyway to download these files??? |
'USBNTMAP.SYS' and 'USBSTOR.SYS' not found
Onkar, either one of two reasons :-
1. Someone has deleted it. - or 'Hidden' it!! 2. The OEM - in their wisdom - has located the BASE2.CAB elsewhere on your HDD or did not provide it at all in their specific version of Windows ME.(unlikely) You could try 'Searching' the whole of your HDD (or even your WinMe CD) for the BASE2.CAB file/folder using Windows Explorer. Once you've found BASE2.CAB, then you can continue with the instructions below. If however, you can't find a copy of BASE2.CAB anywhere on your HDD, my guess is that reason 1. is the cause and that essentially means that if it has been deleted, you've got a 'damaged' version of WinMe and you really need to consider a clean installation of WinMe. If it has been 'Hidden', you'll need to enable the 'Show hidden files and folders' option in Windows Explorer. Good luck Mart "Onkar" wrote in message ... C:Windows\Options\Instal or CABS folder ^^^^^^^ Hi Mart, In C:\Windows there is no folder with the name Options. "Mart" wrote: When it asks for usbntmap.sys and usbstor.sys files, you need to browse (navigate) to the C:Windows\Options\Instal or CABS folder, where there *should* be a complete copy of your WinMe Setup files and the installation of the USB files should then continue. (The folder which you should be looking for [Instal or CABS] is the one containing a whole series of .cab files - including BASE2.CAB which contains the two required files.) Mart "ScarlemsFinest" wrote in message ... I am trying to use my memory stick in my USB but it is not letting me use it because the following files are not found. Is there anyway to download these files??? |
'USBNTMAP.SYS' and 'USBSTOR.SYS' not found
Mart,
Thanks for the response. I have Windows XP SP2 machine. I tried to import USBTOR reg from a machine in which USBSTOR.SYS file exists, and USB Mass Storage device gets detected. "Mart" wrote: Onkar, either one of two reasons :- 1. Someone has deleted it. - or 'Hidden' it!! 2. The OEM - in their wisdom - has located the BASE2.CAB elsewhere on your HDD or did not provide it at all in their specific version of Windows ME.(unlikely) You could try 'Searching' the whole of your HDD (or even your WinMe CD) for the BASE2.CAB file/folder using Windows Explorer. Once you've found BASE2.CAB, then you can continue with the instructions below. If however, you can't find a copy of BASE2.CAB anywhere on your HDD, my guess is that reason 1. is the cause and that essentially means that if it has been deleted, you've got a 'damaged' version of WinMe and you really need to consider a clean installation of WinMe. If it has been 'Hidden', you'll need to enable the 'Show hidden files and folders' option in Windows Explorer. Good luck Mart "Onkar" wrote in message ... C:Windows\Options\Instal or CABS folder ^^^^^^^ Hi Mart, In C:\Windows there is no folder with the name Options. "Mart" wrote: When it asks for usbntmap.sys and usbstor.sys files, you need to browse (navigate) to the C:Windows\Options\Instal or CABS folder, where there *should* be a complete copy of your WinMe Setup files and the installation of the USB files should then continue. (The folder which you should be looking for [Instal or CABS] is the one containing a whole series of .cab files - including BASE2.CAB which contains the two required files.) Mart "ScarlemsFinest" wrote in message ... I am trying to use my memory stick in my USB but it is not letting me use it because the following files are not found. Is there anyway to download these files??? |
'USBNTMAP.SYS' and 'USBSTOR.SYS' not found
Onkar wrote :-
... and USB Mass Storage device gets detected. Well, that's certainly sounds like a 'satisfactory' (maybe temporary?) workaround. Not too sure if it won't cause issues further down the line - depends on what other files and folders are missing I suppose. But as long as it achieves results for your immediate needs then that's what's important. Thanks for the follow-up Onkar and good luck Mart "Onkar" wrote in message ... Mart, Thanks for the response. I have Windows XP SP2 machine. I tried to import USBTOR reg from a machine in which USBSTOR.SYS file exists, and USB Mass Storage device gets detected. "Mart" wrote: Onkar, either one of two reasons :- 1. Someone has deleted it. - or 'Hidden' it!! 2. The OEM - in their wisdom - has located the BASE2.CAB elsewhere on your HDD or did not provide it at all in their specific version of Windows ME.(unlikely) You could try 'Searching' the whole of your HDD (or even your WinMe CD) for the BASE2.CAB file/folder using Windows Explorer. Once you've found BASE2.CAB, then you can continue with the instructions below. If however, you can't find a copy of BASE2.CAB anywhere on your HDD, my guess is that reason 1. is the cause and that essentially means that if it has been deleted, you've got a 'damaged' version of WinMe and you really need to consider a clean installation of WinMe. If it has been 'Hidden', you'll need to enable the 'Show hidden files and folders' option in Windows Explorer. Good luck Mart "Onkar" wrote in message ... C:Windows\Options\Instal or CABS folder ^^^^^^^ Hi Mart, In C:\Windows there is no folder with the name Options. "Mart" wrote: When it asks for usbntmap.sys and usbstor.sys files, you need to browse (navigate) to the C:Windows\Options\Instal or CABS folder, where there *should* be a complete copy of your WinMe Setup files and the installation of the USB files should then continue. (The folder which you should be looking for [Instal or CABS] is the one containing a whole series of .cab files - including BASE2.CAB which contains the two required files.) Mart "ScarlemsFinest" wrote in message ... I am trying to use my memory stick in my USB but it is not letting me use it because the following files are not found. Is there anyway to download these files??? |
'USBNTMAP.SYS' and 'USBSTOR.SYS' not found
Dear Mart,
hehe, i have just tried, yet my USB is not accepting mass storage device. i dont want to solve this problem by formatting. :D. "Mart" wrote: Onkar wrote :- ... and USB Mass Storage device gets detected. Well, that's certainly sounds like a 'satisfactory' (maybe temporary?) workaround. Not too sure if it won't cause issues further down the line - depends on what other files and folders are missing I suppose. But as long as it achieves results for your immediate needs then that's what's important. Thanks for the follow-up Onkar and good luck Mart "Onkar" wrote in message ... Mart, Thanks for the response. I have Windows XP SP2 machine. I tried to import USBTOR reg from a machine in which USBSTOR.SYS file exists, and USB Mass Storage device gets detected. "Mart" wrote: Onkar, either one of two reasons :- 1. Someone has deleted it. - or 'Hidden' it!! 2. The OEM - in their wisdom - has located the BASE2.CAB elsewhere on your HDD or did not provide it at all in their specific version of Windows ME.(unlikely) You could try 'Searching' the whole of your HDD (or even your WinMe CD) for the BASE2.CAB file/folder using Windows Explorer. Once you've found BASE2.CAB, then you can continue with the instructions below. If however, you can't find a copy of BASE2.CAB anywhere on your HDD, my guess is that reason 1. is the cause and that essentially means that if it has been deleted, you've got a 'damaged' version of WinMe and you really need to consider a clean installation of WinMe. If it has been 'Hidden', you'll need to enable the 'Show hidden files and folders' option in Windows Explorer. Good luck Mart "Onkar" wrote in message ... C:Windows\Options\Instal or CABS folder ^^^^^^^ Hi Mart, In C:\Windows there is no folder with the name Options. "Mart" wrote: When it asks for usbntmap.sys and usbstor.sys files, you need to browse (navigate) to the C:Windows\Options\Instal or CABS folder, where there *should* be a complete copy of your WinMe Setup files and the installation of the USB files should then continue. (The folder which you should be looking for [Instal or CABS] is the one containing a whole series of .cab files - including BASE2.CAB which contains the two required files.) Mart "ScarlemsFinest" wrote in message ... I am trying to use my memory stick in my USB but it is not letting me use it because the following files are not found. Is there anyway to download these files??? |
'USBNTMAP.SYS' and 'USBSTOR.SYS' not found
Hi Onkar,
I seem to have misunderstood your earlier post where I read it that the substituted copy(s) XP copies of the missing USBSTOR.SYS file(s) HAD resolved the issue. In your second post, you said :- ... and USB Mass Storage device gets detected. Are you now saying that substitution did NOT work after all? If so, then I'm not really surprised as I wonder just what other files may be missing and I did allude to the only (probably useful) alternative solution was a clean install (including wiping - or better, formatting - your HDD) a fresh copy of WinMe. BTW - Did you manage to find a copy of the BASE2.CAB file/folder? Mart "Onkar" wrote in message ... Dear Mart, hehe, i have just tried, yet my USB is not accepting mass storage device. i dont want to solve this problem by formatting. :D. "Mart" wrote: Onkar wrote :- ... and USB Mass Storage device gets detected. Well, that's certainly sounds like a 'satisfactory' (maybe temporary?) workaround. Not too sure if it won't cause issues further down the line - depends on what other files and folders are missing I suppose. But as long as it achieves results for your immediate needs then that's what's important. Thanks for the follow-up Onkar and good luck Mart "Onkar" wrote in message ... Mart, Thanks for the response. I have Windows XP SP2 machine. I tried to import USBTOR reg from a machine in which USBSTOR.SYS file exists, and USB Mass Storage device gets detected. "Mart" wrote: Onkar, either one of two reasons :- 1. Someone has deleted it. - or 'Hidden' it!! 2. The OEM - in their wisdom - has located the BASE2.CAB elsewhere on your HDD or did not provide it at all in their specific version of Windows ME.(unlikely) You could try 'Searching' the whole of your HDD (or even your WinMe CD) for the BASE2.CAB file/folder using Windows Explorer. Once you've found BASE2.CAB, then you can continue with the instructions below. If however, you can't find a copy of BASE2.CAB anywhere on your HDD, my guess is that reason 1. is the cause and that essentially means that if it has been deleted, you've got a 'damaged' version of WinMe and you really need to consider a clean installation of WinMe. If it has been 'Hidden', you'll need to enable the 'Show hidden files and folders' option in Windows Explorer. Good luck Mart "Onkar" wrote in message ... C:Windows\Options\Instal or CABS folder ^^^^^^^ Hi Mart, In C:\Windows there is no folder with the name Options. "Mart" wrote: When it asks for usbntmap.sys and usbstor.sys files, you need to browse (navigate) to the C:Windows\Options\Instal or CABS folder, where there *should* be a complete copy of your WinMe Setup files and the installation of the USB files should then continue. (The folder which you should be looking for [Instal or CABS] is the one containing a whole series of .cab files - including BASE2.CAB which contains the two required files.) Mart "ScarlemsFinest" wrote in message ... I am trying to use my memory stick in my USB but it is not letting me use it because the following files are not found. Is there anyway to download these files??? |
'USBNTMAP.SYS' and 'USBSTOR.SYS' not found
Mart,
I'm confused. Onkar's running XP SP2 and I would expect both usbstor.sys and usbstor.inf to be present but not usbntmap.sys. Even if the Win Me version of usbstor.sys works with XP this needs to be installed using usbstor.inf which may require other files (I haven't checked). BTW - Did you manage to find a copy of the BASE2.CAB file/folder? Does Onkar have a PC with Win Me? -- Mike Mart wrote: Hi Onkar, I seem to have misunderstood your earlier post where I read it that the substituted copy(s) XP copies of the missing USBSTOR.SYS file(s) HAD resolved the issue. In your second post, you said :- ... and USB Mass Storage device gets detected. Are you now saying that substitution did NOT work after all? If so, then I'm not really surprised as I wonder just what other files may be missing and I did allude to the only (probably useful) alternative solution was a clean install (including wiping - or better, formatting - your HDD) a fresh copy of WinMe. BTW - Did you manage to find a copy of the BASE2.CAB file/folder? |
'USBNTMAP.SYS' and 'USBSTOR.SYS' not found
Jeepers Mike!! - Well I've re-read Onkar's posts several times now and I'm
more confused than ever g I naturally ASS-U -MEd he was talking about a WinMe PC in his first post (After all, he did post to a WinMe newsgroup) then ASS-U-MEd he meant that he'd imported the USBTOR *files* from his XP machine to his WinMe machine in his second post. But now I have re-read it yet again, I see what you mean - I think!!! Onkar doesn't have a WinMe machine at all and was trying to apply a WinMe solution to an XP machine! Bu**er!! Mart "Mike M" wrote in message ... Mart, I'm confused. Onkar's running XP SP2 and I would expect both usbstor.sys and usbstor.inf to be present but not usbntmap.sys. Even if the Win Me version of usbstor.sys works with XP this needs to be installed using usbstor.inf which may require other files (I haven't checked). BTW - Did you manage to find a copy of the BASE2.CAB file/folder? Does Onkar have a PC with Win Me? -- Mike Mart wrote: Hi Onkar, I seem to have misunderstood your earlier post where I read it that the substituted copy(s) XP copies of the missing USBSTOR.SYS file(s) HAD resolved the issue. In your second post, you said :- ... and USB Mass Storage device gets detected. Are you now saying that substitution did NOT work after all? If so, then I'm not really surprised as I wonder just what other files may be missing and I did allude to the only (probably useful) alternative solution was a clean install (including wiping - or better, formatting - your HDD) a fresh copy of WinMe. BTW - Did you manage to find a copy of the BASE2.CAB file/folder? |
'USBNTMAP.SYS' and 'USBSTOR.SYS' not found
Mart wrote:
Jeepers Mike!! - Well I've re-read Onkar's posts several times now and I'm more confused than ever g I naturally ASS-U -MEd he was talking about a WinMe PC in his first post (After all, he did post to a WinMe newsgroup) then ASS-U-MEd he meant that he'd imported the USBTOR *files* from his XP machine to his WinMe machine in his second post. But now I have re-read it yet again, I see what you mean - I think!!! Onkar doesn't have a WinMe machine at all and was trying to apply a WinMe solution to an XP machine! Bu**er!! LOL -- Mike |
'USBNTMAP.SYS' and 'USBSTOR.SYS' not found
"Mart" wrote: When it asks for usbntmap.sys and usbstor.sys files, you need to browse (navigate) to the C:Windows\Options\Instal or CABS folder, where there *should* be a complete copy of your WinMe Setup files and the installation of the USB files should then continue. (The folder which you should be looking for [Instal or CABS] is the one containing a whole series of .cab files - including BASE2.CAB which contains the two required files.) Mart "ScarlemsFinest" wrote in message ... I am trying to use my memory stick in my USB but it is not letting me use it because the following files are not found. Is there anyway to download these files??? i have the sane problem the said files are missing from the cabs folder so is there anywhere i can download these files as i am trying to connect a vodafone dongle to a acer one laptop |
'USBNTMAP.SYS' and 'USBSTOR.SYS' not found
hforsyth058 wrote:
"Mart" wrote: When it asks for usbntmap.sys and usbstor.sys files, you need to browse (navigate) to the C:Windows\Options\Instal or CABS folder, where there *should* be a complete copy of your WinMe Setup files and the installation of the USB files should then continue. (The folder which you should be looking for [Instal or CABS] is the one containing a whole series of .cab files - including BASE2.CAB which contains the two required files.) i have the sane problem the said files are missing from the cabs folder so is there anywhere i can download these files as i am trying to connect a vodafone dongle to a acer one laptop The files you want aren't visible in the folder, they are contained in the cab files. Point the installer at the folder when it asks for the files and it will extract the files it needs. As mart has already mentioned usbntmap.sys and usbstor.sys are contained in the file BASE2.CAB. -- Mike Maltby |
| All times are GMT +1. The time now is 02:38 PM. |
Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Win98Banter.com